diff options
author | 2017-10-19 21:52:53 +0000 | |
---|---|---|
committer | 2017-10-19 21:52:53 +0000 | |
commit | 8dfe90a3ef242ac0b0ab93df9ed895800ab3e94e (patch) | |
tree | 6439cd8beaeb427cceb3a84595793771e725fac9 /docs/testing/user/userguide/12-nsb_installation.rst | |
parent | fc125f816f42a2476f7daa0cb1b3c48d60226601 (diff) | |
parent | 97b961aee6653553c5a35ecee5cb766924cd10f1 (diff) |
Merge "nsb_installation: updates"
Diffstat (limited to 'docs/testing/user/userguide/12-nsb_installation.rst')
-rw-r--r-- | docs/testing/user/userguide/12-nsb_installation.rst | 849 |
1 files changed, 849 insertions, 0 deletions
diff --git a/docs/testing/user/userguide/12-nsb_installation.rst b/docs/testing/user/userguide/12-nsb_installation.rst new file mode 100644 index 000000000..8cc26acd5 --- /dev/null +++ b/docs/testing/user/userguide/12-nsb_installation.rst @@ -0,0 +1,849 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2016-2017 Intel Corporation. + +Yardstick - NSB Testing -Installation +===================================== + +Abstract +-------- + +The Network Service Benchmarking (NSB) extends the yardstick framework to do +VNF characterization and benchmarking in three different execution +environments viz., bare metal i.e. native Linux environment, standalone virtual +environment and managed virtualized environment (e.g. Open stack etc.). +It also brings in the capability to interact with external traffic generators +both hardware & software based for triggering and validating the traffic +according to user defined profiles. + +The steps needed to run Yardstick with NSB testing are: + +* Install Yardstick (NSB Testing). +* Setup/Reference pod.yaml describing Test topology +* Create/Reference the test configuration yaml file. +* Run the test case. + + +Prerequisites +------------- + +Refer chapter Yardstick Installation for more information on yardstick +prerequisites + +Several prerequisites are needed for Yardstick(VNF testing): + + - Python Modules: pyzmq, pika. + + - flex + + - bison + + - build-essential + + - automake + + - libtool + + - librabbitmq-dev + + - rabbitmq-server + + - collectd + + - intel-cmt-cat + +Hardware & Software Ingredients +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +SUT requirements: + + + +-----------+--------------------+ + | Item | Description | + +-----------+--------------------+ + | Memory | Min 20GB | + +-----------+--------------------+ + | NICs | 2 x 10G | + +-----------+--------------------+ + | OS | Ubuntu 16.04.3 LTS | + +-----------+--------------------+ + | kernel | 4.4.0-34-generic | + +-----------+--------------------+ + | DPDK | 17.02 | + +-----------+--------------------+ + +Boot and BIOS settings: + + + +------------------+---------------------------------------------------+ + | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 | + | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 | + | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 | + | | iommu=on iommu=pt intel_iommu=on | + | | Note: nohz_full and rcu_nocbs is to disable Linux | + | | kernel interrupts | + +------------------+---------------------------------------------------+ + |BIOS | CPU Power and Performance Policy <Performance> | + | | CPU C-state Disabled | + | | CPU P-state Disabled | + | | Enhanced IntelĀ® SpeedstepĀ® Tech Disabled | + | | Hyper-Threading Technology (If supported) Enabled | + | | Virtualization Techology Enabled | + | | Intel(R) VT for Direct I/O Enabled | + | | Coherency Enabled | + | | Turbo Boost Disabled | + +------------------+---------------------------------------------------+ + + + +Install Yardstick (NSB Testing) +------------------------------- + +Download the source code and install Yardstick from it + +.. code-block:: console + + git clone https://gerrit.opnfv.org/gerrit/yardstick + + cd yardstick + + # Switch to latest stable branch + # git checkout <tag or stable branch> + git checkout stable/euphrates + + # For Bare-Metal or Standalone Virtualization + ./nsb_setup.sh + + # For OpenStack + ./nsb_setup.sh <path to admin-openrc.sh> + + +Above command setup docker with latest yardstick code. To execute + +.. code-block:: console + + docker exec -it yardstick bash + +It will also automatically download all the packages needed for NSB Testing setup. +Refer chapter :doc:`04-installation` for more on docker **Install Yardstick using Docker (recommended)** + +System Topology: +---------------- + +.. code-block:: console + + +----------+ +----------+ + | | | | + | | (0)----->(0) | | + | TG1 | | DUT | + | | | | + | | (1)<-----(1) | | + +----------+ +----------+ + trafficgen_1 vnf + + +Environment parameters and credentials +-------------------------------------- + +Config yardstick conf +^^^^^^^^^^^^^^^^^^^^^ + +If user did not run 'yardstick env influxdb' inside the container, which will generate +correct yardstick.conf, then create the config file manually (run inside the container): + + cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf + vi /etc/yardstick/yardstick.conf + +Add trex_path, trex_client_lib and bin_path in 'nsb' section. + +:: + + [DEFAULT] + debug = True + dispatcher = file, influxdb + + [dispatcher_influxdb] + timeout = 5 + target = http://{YOUR_IP_HERE}:8086 + db_name = yardstick + username = root + password = root + + [nsb] + trex_path=/opt/nsb_bin/trex/scripts + bin_path=/opt/nsb_bin + trex_client_lib=/opt/nsb_bin/trex_client/stl + +Run Yardstick - Network Service Testcases +----------------------------------------- + + +NS testing - using yardstick CLI +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + See :doc:`04-installation` + +.. code-block:: console + + + docker exec -it yardstick /bin/bash + source /etc/yardstick/openstack.creds (only for heat TC if nsb_setup.sh was NOT used) + export EXTERNAL_NETWORK="<openstack public network>" (only for heat TC) + yardstick --debug task start yardstick/samples/vnf_samples/nsut/<vnf>/<test case> + +Network Service Benchmarking - Bare-Metal +----------------------------------------- + +Bare-Metal Config pod.yaml describing Topology +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Bare-Metal 2-Node setup: +######################## +.. code-block:: console + + +----------+ +----------+ + | | | | + | | (0)----->(0) | | + | TG1 | | DUT | + | | | | + | | (n)<-----(n) | | + +----------+ +----------+ + trafficgen_1 vnf + +Bare-Metal 3-Node setup - Correlated Traffic: +############################################# +.. code-block:: console + + +----------+ +----------+ +------------+ + | | | | | | + | | | | | | + | | (0)----->(0) | | | UDP | + | TG1 | | DUT | | Replay | + | | | | | | + | | | |(1)<---->(0)| | + +----------+ +----------+ +------------+ + trafficgen_1 vnf trafficgen_2 + + +Bare-Metal Config pod.yaml +^^^^^^^^^^^^^^^^^^^^^^^^^^ +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields.:: + + cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + + - + name: vnf + role: vnf + ip: 1.1.1.2 + user: root + password: r00t + host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:03" + + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:04" + routing_table: + - network: "152.16.100.20" + netmask: "255.255.255.0" + gateway: "152.16.100.20" + if: "xe0" + - network: "152.16.40.20" + netmask: "255.255.255.0" + gateway: "152.16.40.20" + if: "xe1" + nd_route_tbl: + - network: "0064:ff9b:0:0:0:0:9810:6414" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:6414" + if: "xe0" + - network: "0064:ff9b:0:0:0:0:9810:2814" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:2814" + if: "xe1" + + +Network Service Benchmarking - Standalone Virtualization +-------------------------------------------------------- + +SR-IOV: +^^^^^^^ + +SR-IOV Pre-requisites +##################### + +On Host: + a) Create a bridge for VM to connect to external network + + .. code-block:: console + + brctl addbr br-int + brctl addif br-int <interface_name> #This interface is connected to internet + + b) Build guest image for VNF to run. + Most of the sample test cases in Yardstick are using a guest image called + ``yardstick-image`` which deviates from an Ubuntu Cloud Server image + Yardstick has a tool for building this custom image with samplevnf. + It is necessary to have ``sudo`` rights to use this tool. + + Also you may need to install several additional packages to use this tool, by + following the commands below:: + + sudo apt-get update && sudo apt-get install -y qemu-utils kpartx + + This image can be built using the following command in the directory where Yardstick is installed + + .. code-block:: console + + export YARD_IMG_ARCH='amd64' + sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers + + Please use ansible script to generate a cloud image refer to :doc:`04-installation` + + for more details refer to chapter :doc:`04-installation` + + .. note:: VM should be build with static IP and should be accessible from yardstick host. + + +SR-IOV Config pod.yaml describing Topology +########################################## + +SR-IOV 2-Node setup: +#################### +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | VF NIC | | VF NIC | + +--------+ +--------+ + ^ ^ + | | + | | + +----------+ +-------------------------+ + | | | ^ ^ | + | | | | | | + | | (0)<----->(0) | ------ | | + | TG1 | | SUT | | + | | | | | + | | (n)<----->(n) |------------------ | + +----------+ +-------------------------+ + trafficgen_1 host + + + +SR-IOV 3-Node setup - Correlated Traffic +######################################## +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | VF NIC | | VF NIC | + +--------+ +--------+ + ^ ^ + | | + | | + +----------+ +-------------------------+ +--------------+ + | | | ^ ^ | | | + | | | | | | | | + | | (0)<----->(0) | ------ | | | TG2 | + | TG1 | | SUT | | | (UDP Replay) | + | | | | | | | + | | (n)<----->(n) | ------ | (n)<-->(n) | | + +----------+ +-------------------------+ +--------------+ + trafficgen_1 host trafficgen_2 + +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields. + +.. code-block:: console + + cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml + cp <yardstick>/etc/yardstick/nodes/standalone/host_sriov.yaml /etc/yardstick/nodes/standalone/host_sriov.yaml + +.. note:: Update all the required fields like ip, user, password, pcis, etc... + +SR-IOV Config pod_trex.yaml +########################### + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + key_filename: /root/.ssh/id_rsa + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + +SR-IOV Config host_sriov.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: sriov + role: Sriov + ip: 192.168.100.101 + user: "" + password: "" + +SR-IOV testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_sriov_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` + +Update "contexts" section +""""""""""""""""""""""""" + +.. code-block:: YAML + + contexts: + - name: yardstick + type: Node + file: /etc/yardstick/nodes/standalone/pod_trex.yaml + - type: StandaloneSriov + file: /etc/yardstick/nodes/standalone/host_sriov.yaml + name: yardstick + vm_deploy: True + flavor: + images: "/var/lib/libvirt/images/ubuntu.qcow2" + ram: 4096 + extra_specs: + hw:cpu_sockets: 1 + hw:cpu_cores: 6 + hw:cpu_threads: 2 + user: "" # update VM username + password: "" # update password + servers: + vnf: + network_ports: + mgmt: + cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask> + xe0: + - uplink_0 + xe1: + - downlink_0 + networks: + uplink_0: + phy_port: "0000:05:00.0" + vpci: "0000:00:07.0" + cidr: '152.16.100.10/24' + gateway_ip: '152.16.100.20' + downlink_0: + phy_port: "0000:05:00.1" + vpci: "0000:00:08.0" + cidr: '152.16.40.10/24' + gateway_ip: '152.16.100.20' + + + +OVS-DPDK: +^^^^^^^^^ + +OVS-DPDK Pre-requisites +####################### + +On Host: + a) Create a bridge for VM to connect to external network + + .. code-block:: console + + brctl addbr br-int + brctl addif br-int <interface_name> #This interface is connected to internet + + b) Build guest image for VNF to run. + Most of the sample test cases in Yardstick are using a guest image called + ``yardstick-image`` which deviates from an Ubuntu Cloud Server image + Yardstick has a tool for building this custom image with samplevnf. + It is necessary to have ``sudo`` rights to use this tool. + + Also you may need to install several additional packages to use this tool, by + following the commands below:: + + sudo apt-get update && sudo apt-get install -y qemu-utils kpartx + + This image can be built using the following command in the directory where Yardstick is installed:: + + export YARD_IMG_ARCH='amd64' + sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers + sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh + + for more details refer to chapter :doc:`04-installation` + + .. note:: VM should be build with static IP and should be accessible from yardstick host. + + c) OVS & DPDK version. + - OVS 2.7 and DPDK 16.11.1 above version is supported + + d) Setup OVS/DPDK on host. + Please refer to below link on how to setup `OVS-DPDK <http://docs.openvswitch.org/en/latest/intro/install/dpdk/>`_ + + +OVS-DPDK Config pod.yaml describing Topology +############################################ + +OVS-DPDK 2-Node setup: +###################### + + +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | virtio | | virtio | + +--------+ +--------+ + ^ ^ + | | + | | + +--------+ +--------+ + | vHOST0 | | vHOST1 | + +----------+ +-------------------------+ + | | | ^ ^ | + | | | | | | + | | (0)<----->(0) | ------ | | + | TG1 | | SUT | | + | | | (ovs-dpdk) | | + | | (n)<----->(n) |------------------ | + +----------+ +-------------------------+ + trafficgen_1 host + + +OVS-DPDK 3-Node setup - Correlated Traffic +########################################## + +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | virtio | | virtio | + +--------+ +--------+ + ^ ^ + | | + | | + +--------+ +--------+ + | vHOST0 | | vHOST1 | + +----------+ +-------------------------+ +------------+ + | | | ^ ^ | | | + | | | | | | | | + | | (0)<----->(0) | ------ | | | TG2 | + | TG1 | | SUT | | |(UDP Replay)| + | | | (ovs-dpdk) | | | | + | | (n)<----->(n) | ------ |(n)<-->(n)| | + +----------+ +-------------------------+ +------------+ + trafficgen_1 host trafficgen_2 + + +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields. + +.. code-block:: console + + cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml + cp <yardstick>/etc/yardstick/nodes/standalone/host_ovs.yaml /etc/yardstick/nodes/standalone/host_ovs.yaml + +.. note:: Update all the required fields like ip, user, password, pcis, etc... + +OVS-DPDK Config pod_trex.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + +OVS-DPDK Config host_ovs.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: ovs_dpdk + role: OvsDpdk + ip: 192.168.100.101 + user: "" + password: "" + +ovs_dpdk testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_ovs_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` + +Update "contexts" section +""""""""""""""""""""""""" + +.. code-block:: YAML + + contexts: + - name: yardstick + type: Node + file: /etc/yardstick/nodes/standalone/pod_trex.yaml + - type: StandaloneOvsDpdk + name: yardstick + file: /etc/yardstick/nodes/standalone/pod_ovs.yaml + vm_deploy: True + ovs_properties: + version: + ovs: 2.7.0 + dpdk: 16.11.1 + pmd_threads: 2 + ram: + socket_0: 2048 + socket_1: 2048 + queues: 4 + vpath: "/usr/local" + + flavor: + images: "/var/lib/libvirt/images/ubuntu.qcow2" + ram: 4096 + extra_specs: + hw:cpu_sockets: 1 + hw:cpu_cores: 6 + hw:cpu_threads: 2 + user: "" # update VM username + password: "" # update password + servers: + vnf: + network_ports: + mgmt: + cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask> + xe0: + - uplink_0 + xe1: + - downlink_0 + networks: + uplink_0: + phy_port: "0000:05:00.0" + vpci: "0000:00:07.0" + cidr: '152.16.100.10/24' + gateway_ip: '152.16.100.20' + downlink_0: + phy_port: "0000:05:00.1" + vpci: "0000:00:08.0" + cidr: '152.16.40.10/24' + gateway_ip: '152.16.100.20' + + +Enabling other Traffic generator +-------------------------------- + +IxLoad: +^^^^^^^ + +1. Software needed: IxLoadAPI ``<IxLoadTclApi verson>Linux64.bin.tgz and <IxOS version>Linux64.bin.tar.gz`` (Download from ixia support site) + Install - ``<IxLoadTclApi verson>Linux64.bin.tgz & <IxOS version>Linux64.bin.tar.gz`` + If the installation was not done inside the container, after installing the IXIA client, + check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure you can run this cmd + inside the yardstick container. Usually user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython + to /usr/bin/ixiapython<ver> inside the container. + +2. Update pod_ixia.yaml file with ixia details. + + .. code-block:: console + + cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml + + Config pod_ixia.yaml + + .. code-block:: yaml + + + nodes: + - + name: trafficgen_1 + role: IxNet + ip: 1.2.1.1 #ixia machine ip + user: user + password: r00t + key_filename: /root/.ssh/id_rsa + tg_config: + ixchassis: "1.2.1.7" #ixia chassis ip + tcl_port: "8009" # tcl server port + lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" + root_dir: "/opt/ixia/ixos-api/8.01.0.2/" + py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" + py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" + dut_result_dir: "/mnt/ixia" + version: 8.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "2:5" # Card:port + driver: "none" + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.0.0" + local_mac: "00:98:10:64:14:00" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "2:6" # [(Card, port)] + driver: "none" + dpdk_port_num: 1 + local_ip: "152.40.40.20" + netmask: "255.255.0.0" + local_mac: "00:98:28:28:14:00" + + for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration + +3. Start IxOS TCL Server (Install 'Ixia IxExplorer IxOS <version>') + You will also need to configure the IxLoad machine to start the IXIA + IxosTclServer. This can be started like so: + + - Connect to the IxLoad machine using RDP + - Go to: + ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` + or + ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` + +4. Create a folder "Results" in c:\ and share the folder on the network. + +5. execute testcase in samplevnf folder. + eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_http_ixload_1b_Requests-65000_Concurrency.yaml`` + +IxNetwork: +^^^^^^^^^^ + +1. Software needed: ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` (Download from ixia support site) + Install - ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` +2. Update pod_ixia.yaml file with ixia details. + + .. code-block:: console + + cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml + + Config pod_ixia.yaml + + .. code-block:: yaml + + nodes: + - + name: trafficgen_1 + role: IxNet + ip: 1.2.1.1 #ixia machine ip + user: user + password: r00t + key_filename: /root/.ssh/id_rsa + tg_config: + ixchassis: "1.2.1.7" #ixia chassis ip + tcl_port: "8009" # tcl server port + lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" + root_dir: "/opt/ixia/ixos-api/8.01.0.2/" + py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" + py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" + dut_result_dir: "/mnt/ixia" + version: 8.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "2:5" # Card:port + driver: "none" + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.0.0" + local_mac: "00:98:10:64:14:00" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "2:6" # [(Card, port)] + driver: "none" + dpdk_port_num: 1 + local_ip: "152.40.40.20" + netmask: "255.255.0.0" + local_mac: "00:98:28:28:14:00" + + for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration + +3. Start IxNetwork TCL Server + You will also need to configure the IxNetwork machine to start the IXIA + IxNetworkTclServer. This can be started like so: + + - Connect to the IxNetwork machine using RDP + - Go to: ``Start->Programs->Ixia->IxNetwork->IxNetwork 7.21.893.14 GA->IxNetworkTclServer`` (or ``IxNetworkApiServer``) + +4. execute testcase in samplevnf folder. + eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_ixia.yaml`` + |