summaryrefslogtreecommitdiffstats
path: root/docs/results/fuel-os-nosdn-nofeature-ha.rst
diff options
context:
space:
mode:
authorJingLu5 <lvjing5@huawei.com>2016-09-21 17:38:04 +0800
committerJingLu5 <lvjing5@huawei.com>2016-09-21 17:38:04 +0800
commit090d493c2247ee63c9f9509191b011d2ecfa921f (patch)
tree9f294b71a6b995a4a5e68d6793f0ffb40ad9adc7 /docs/results/fuel-os-nosdn-nofeature-ha.rst
parent4a64b9f48f6fad2c7a74ba6d8278a521f8920521 (diff)
Refine release note & Update scenario test results
JIRA: YARDSTICK-351 JIRA: YARDSTICK-354 Also fix a error in Yardstick_task_templates.rst Change-Id: Id9d091fce3afa7b0f62a08dfd6bca504aeaac805 Signed-off-by: JingLu5 <lvjing5@huawei.com>
Diffstat (limited to 'docs/results/fuel-os-nosdn-nofeature-ha.rst')
-rw-r--r--docs/results/fuel-os-nosdn-nofeature-ha.rst131
1 files changed, 0 insertions, 131 deletions
diff --git a/docs/results/fuel-os-nosdn-nofeature-ha.rst b/docs/results/fuel-os-nosdn-nofeature-ha.rst
deleted file mode 100644
index eb8b14741..000000000
--- a/docs/results/fuel-os-nosdn-nofeature-ha.rst
+++ /dev/null
@@ -1,131 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-===========================================
-Test Results for fuel-os-nosdn-nofeature-ha
-===========================================
-
-.. toctree::
- :maxdepth: 2
-
-
-Details
-=======
-
-.. _Grafana: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs
-
-Overview of test results
-------------------------
-
-See Grafana_ for viewing test result metrics for each respective test case. It
-is possible to chose which specific scenarios to look at, and then to zoom in
-on the details of each run test scenario as well.
-
-All of the test case results below are based on 5 consecutive scenario test
-runs, each run on the Ericsson POD2_ between February 13 and 18 in 2016. The
-best would be to have more runs to draw better conclusions from, but these are
-the only runs available at the time of OPNFV R2 release.
-
-TC002
------
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping. The measurements are on average varying between 0.5 and 1.1 ms
-with a first 2 - 2.5 ms RTT spike in the beginning of each run (This could be
-because of normal ARP handling). The 2 last runs are very similar in their
-results. But, to be able to draw any further conclusions more runs should be
-made. There is one measurement taken on February 16 that does not have the
-first RTT spike, and less variations to the RTT. The reason for this is
-unknown. There is a discussion on another test measurement made Feb. 16 in
-TC037_.
-SLA set to 10 ms. The SLA value is used as a reference, it has not
-been defined by OPNFV.
-
-TC005
------
-The IO read bandwidth look similar between different test runs, with an
-average at approx. 160-170 MB/s. Within each run the results vary much,
-minimum 2 MB/s and maximum 630 MB/s on the totality. Most runs have a
-minimum of 3 MB/s (one run at 2 MB/s). The maximum BW varies much more in
-absolute numbers, between 566 and 630 MB/s.
-SLA set to 400 MB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC010
------
-The measurements for memory latency are consistent among test runs and results
-in approx. 1.2 ns. The variations between runs are similar, between
-1.215 and 1.219 ns. One exception is February 16, where the varation is
-greater, between 1.22 and 1.28 ns. SLA set to 30 ns. The SLA value is used as
-a reference, it has not been defined by OPNFV.
-
-TC011
------
-For this scenario no results are available to report on. Probable reason is
-an integer/floating point issue regarding how InfluxDB is populated with
-result data from the test runs.
-
-TC012
------
-The average measurements for memory bandwidth are consistent among most of the
-different test runs at 17.2 - 17.3 GB/s. The very first test run averages at
-17.7 GB/s. Within each run the results vary, with a minimal BW of 15.4
-GB/s and maximum of 18.2 GB/s of the totality.
-SLA set to 15 GB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC014
------
-The Unixbench processor single and parallel speed scores show similar results
-at approx. 3200. The runs vary between scores 3160 and 3240.
-No SLA set.
-
-TC037
------
-The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
-on different blades are measured when increasing the amount of UDP flows sent
-between the VMs using pktgen as packet generator tool.
-
-Round trip times and packet throughput between VMs are typically affected by
-the amount of flows set up and result in higher RTT and less PPS
-throughput.
-
-When running with less than 10000 flows the results are flat and consistent.
-RTT is then approx. 30 ms and the number of PPS remains flat at approx.
-250000 PPS. Beyond approx. 10000 flows and up to 1000000 (one million) there
-is an even drop in RTT and PPS performance, eventually ending up at approx.
-150-250 ms and 40000 PPS respectively.
-
-There is one measurement made February 16 that has slightly worse results
-compared to the other 4 measurements. The reason for this is unknown. For
-instance anyone being logged onto the POD can be of relevance for such a
-disturbance.
-
-Detailed test results
----------------------
-The scenario was run on Ericsson POD2_ with:
-Fuel 8.0
-OpenStack Liberty
-OVS 2.3.1
-
-No SDN controller installed
-
-Rationale for decisions
------------------------
-Pass
-
-Tests were successfully executed and metrics collects (apart from TC011_).
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-The pktgen test configuration has a relatively large base effect on RTT in
-TC037 compared to TC002, where there is no background load at all (30 ms
-compared to 1 ms or less, which is more than a 3000 percentage different
-in RTT results). The larger amounts of flows in TC037 generate worse
-RTT results, in the magnitude of several hundreds of milliseconds. It would
-be interesting to also make and compare all these measurements to completely
-(optimized) bare metal machines running native Linux with all other relevant
-tools available, e.g. lmbench, pktgen etc.