Include vTC overview in Yardstick documentation

This change includes the vTC overview in Yardstick configguide, the
original vTC/README has been renamed to 04-vTC-overview and added in the
configguide.

The vTC/abbreviations is deleted, all included in glossary.rst

Index and 03-list-of-tcs are updated.

JIRA:-

Change-Id: Ifc5cf1cc258dee6743af189f347e8adbbec6a32f
Signed-off-by: Ana C <ana.cunha@ericsson.com>

1 files changed, 0 insertions, 87 deletions

diff --git a/docs/configguide/vTC/README.rst b/docs/configguide/vTC/README.rst
deleted file mode 100644
index ae6fefa59..000000000
--- a/docs/configguide/vTC/README.rst
+++ /dev/null
@@ -1,87 +0,0 @@
-==========================
-Virtual Traffic Classifier
-==========================
-
-Overview
-========
-
-The virtual Traffic Classifier VNF [1], comprises in the current version of
-1 VNFC [2]. The VNFC contains both the Traffic Inspection module, and the
-Traffic forwarding module, needed to run the VNF. The exploitation of DPI
-methods for traffic classification is built around two basic assumptions:
-
-(i) third parties unaffiliated with either source or recipient are able to
-inspect each IP packet’s payload and
-(ii) the classifier knows the relevant syntax of each application’s packet
-payloads (protocol signatures, data patterns, etc.).
-
-The proposed DPI based approach will only use an indicative, small number of
-the initial packets from each flow in order to identify the content and not
-inspect each packet.
-
-In this respect it follows the Packet Based per Flow State (PBFS).
-This method uses a table to track each session based on the 5-tuples
-(src address,dest address,src port,dest port,transport protocol)
-that is maintained for each flow.
-
-Concepts
-========
-
-Traffic Inspection: The process of packet analysis and application
-identification of network traffic that passes through the vTC.
-
-Traffic Forwarding: The process of packet forwarding from an incoming
-network interface to a pre-defined outgoing network interface.
-
-Traffic Rule Application: The process of packet tagging, based on a
-predefined set of rules. Packet tagging may include e.g. ToS field
-modification.
-
-Architecture
-============
-
-The Traffic Inspection module is the most computationally intensive component
-of the VNF. It implements filtering and packet matching algorithms in order to
-support the enhanced traffic forwarding capability of the VNF. The component
-supports a flow table (exploiting hashing algorithms for fast indexing of
-flows) and an inspection engine for traffic classification.
-
-The implementation used for these experiments exploits the nDPI library.
-The packet capturing mechanism is implemented using libpcap. When the DPI
-engine identifies a new flow, the flow register is updated with the
-appropriate information and transmitted across the Traffic Forwarding module,
-which then applies any required policy updates.
-
-The Traffic Forwarding moudle is responsible for routing and packet forwarding.
-It accepts incoming network traffic, consults the flow table for classification
-information for each incoming flow and then applies pre-defined policies
-marking e.g. type of Service/Differentiated Services Code Point (TOS/DSCP)
-multimedia traffic for QoS enablement on the forwarded traffic.
-It is assumed that the traffic is forwarded using the default policy until it
-is identified and new policies are enforced.
-
-The expected response delay is considered to be negligible,as only a small
-number of packets are required to identify each flow.
-
-Graphical Overview
-==================
-
-Install
-=======
-
-run the build.sh with root privileges
-
-Run
-===
-
-sudo ./pfbridge -a eth1 -b eth2
-
-Custom Image
-============
-
-TBD
-
-Development Environment
-=======================
-
-Ubuntu 14.04 >= VM