path: root/docs/configguide/installation.rst

.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) OPNFV, Intel Corporation, AT&T and others.

.. _vsperf-installation:

======================
Installing vswitchperf
======================

Downloading vswitchperf
-----------------------

The vswitchperf can be downloaded from its official git repository, which is
hosted by OPNFV. It is necessary to install a ``git`` at your DUT before downloading
vswitchperf. Installation of ``git`` is specific to the packaging system used by
Linux OS installed at DUT.

Example of installation of GIT package and its dependencies:

* in case of OS based on RedHat Linux:

  .. code:: bash

     sudo yum install git


* in case of Ubuntu or Debian:

  .. code:: bash

     sudo apt-get install git

After the ``git`` is successfully installed at DUT, then vswitchperf can be downloaded
as follows:

.. code:: bash

   git clone http://git.opnfv.org/vswitchperf

The last command will create a directory ``vswitchperf`` with a local copy of vswitchperf
repository.

Supported Operating Systems
---------------------------

* CentOS 7.3
* Fedora 24 (kernel 4.8 requires DPDK 16.11 and newer)
* Fedora 25 (kernel 4.9 requires DPDK 16.11 and newer)
* openSUSE 42.2
* RedHat 7.2 Enterprise Linux
* RedHat 7.3 Enterprise Linux
* Ubuntu 14.04
* Ubuntu 16.04
* Ubuntu 16.10 (kernel 4.8 requires DPDK 16.11 and newer)

Supported vSwitches
-------------------

The vSwitch must support Open Flow 1.3 or greater.

* Open vSwitch
* Open vSwitch with DPDK support
* TestPMD application from DPDK (supports p2p and pvp scenarios)

Supported Hypervisors
---------------------

* Qemu version 2.3 or greater (version 2.5.0 is recommended)

Supported VNFs
--------------

In theory, it is possible to use any VNF image, which is compatible
with supported hypervisor. However such VNF must ensure, that appropriate
number of network interfaces is configured and that traffic is properly
forwarded among them. For new vswitchperf users it is recommended to start
with official vloop-vnf_ image, which is maintained by vswitchperf community.

.. _vloop-vnf:

vloop-vnf
=========

The official VM image is called vloop-vnf and it is available for free download
from OPNFV artifactory. This image is based on Linux Ubuntu distribution and it
supports following applications for traffic forwarding:

* DPDK testpmd
* Linux Bridge
* Custom l2fwd module

The vloop-vnf can be downloaded to DUT, for example by ``wget``:

  .. code:: bash

     wget http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160823.qcow2

**NOTE:** In case that ``wget`` is not installed at your DUT, you could install it at RPM
based system by ``sudo yum install wget`` or at DEB based system by ``sudo apt-get install
wget``.

Changelog of vloop-vnf:

  * `vloop-vnf-ubuntu-14.04_20160823`_

    * ethtool installed
    * only 1 NIC is configured by default to speed up boot with 1 NIC setup
    * security updates applied

  * `vloop-vnf-ubuntu-14.04_20160804`_

    * Linux kernel 4.4.0 installed
    * libnuma-dev installed
    * security updates applied

  * `vloop-vnf-ubuntu-14.04_20160303`_

    * snmpd service is disabled by default to avoid error messages during VM boot
    * security updates applied

  * `vloop-vnf-ubuntu-14.04_20151216`_

    * version with development tools required for build of DPDK and l2fwd

.. _vsperf-installation-script:

Installation
------------

The test suite requires Python 3.3 or newer and relies on a number of other
system and python packages. These need to be installed for the test suite
to function.

Installation of required packages, preparation of Python 3 virtual
environment and compilation of OVS, DPDK and QEMU is performed by
script **systems/build_base_machine.sh**. It should be executed under
user account, which will be used for vsperf execution.

**NOTE:** Password-less sudo access must be configured for given
user account before script is executed.

.. code:: bash

    $ cd systems
    $ ./build_base_machine.sh

**NOTE:** you don't need to go into any of the systems subdirectories,
simply run the top level **build_base_machine.sh**, your OS will be detected
automatically.

Script **build_base_machine.sh** will install all the vsperf dependencies
in terms of system packages, Python 3.x and required Python modules.
In case of CentOS 7 or RHEL it will install Python 3.3 from an additional
repository provided by Software Collections (`a link`_). Installation script
will also use `virtualenv`_ to create a vsperf virtual environment, which is
isolated from the default Python environment. This environment will reside in a
directory called **vsperfenv** in $HOME. It will ensure, that system wide Python
installation is not modified or broken by VSPERF installation. The complete list
of Python packages installed inside virtualenv can be found at file
``requirements.txt``, which is located at vswitchperf repository.

**NOTE:** For RHEL 7.3 Enterprise and CentOS 7.3 OVS Vanilla is not
built from upstream source due to kernel incompatibilities. Please see the
instructions in the vswitchperf_design document for details on configuring
OVS Vanilla for binary package usage.

.. _vpp-installation:

VPP installation
================

Currently vswitchperf installation scripts do not support automatic build
of VPP. In order to execute tests with VPP, it is required to install it
manually. Please refer to the official documentation of `fd.io`_ project to
install VPP from `packages`_ or from the `sources`_.

See details about :ref:`vpp-test`.

.. _fd.io: https://fd.io/
.. _packages: https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages
.. _sources: https://wiki.fd.io/view/VPP/Build,_install,_and_test_images

Using vswitchperf
-----------------

You will need to activate the virtual environment every time you start a
new shell session. Its activation is specific to your OS:

* CentOS 7 and RHEL

  .. code:: bash

     $ scl enable python33 bash
     $ source $HOME/vsperfenv/bin/activate

* Fedora and Ubuntu

  .. code:: bash

     $ source $HOME/vsperfenv/bin/activate

After the virtual environment is configued, then VSPERF can be used.
For example:

  .. code:: bash

     (vsperfenv) $ cd vswitchperf
     (vsperfenv) $ ./vsperf --help

Gotcha
======

In case you will see following error during environment activation:

.. code:: bash

   $ source $HOME/vsperfenv/bin/activate
   Badly placed ()'s.

then check what type of shell you are using:

.. code:: bash

   $ echo $SHELL
   /bin/tcsh

See what scripts are available in $HOME/vsperfenv/bin

.. code:: bash

   $ ls $HOME/vsperfenv/bin/
   activate          activate.csh      activate.fish     activate_this.py

source the appropriate script

.. code:: bash

   $ source bin/activate.csh

Working Behind a Proxy
======================

If you're behind a proxy, you'll likely want to configure this before
running any of the above. For example:

  .. code:: bash

    export http_proxy=proxy.mycompany.com:123
    export https_proxy=proxy.mycompany.com:123

.. _a link: http://www.softwarecollections.org/en/scls/rhscl/python33/
.. _virtualenv: https://virtualenv.readthedocs.org/en/latest/
.. _vloop-vnf-ubuntu-14.04_20160823: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160823.qcow2
.. _vloop-vnf-ubuntu-14.04_20160804: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160804.qcow2
.. _vloop-vnf-ubuntu-14.04_20160303: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160303.qcow2
.. _vloop-vnf-ubuntu-14.04_20151216: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20151216.qcow2

Hugepage Configuration
----------------------

Systems running vsperf with either dpdk and/or tests with guests must configure
hugepage amounts to support running these configurations. It is recommended
to configure 1GB hugepages as the pagesize.

The amount of hugepages needed depends on your configuration files in vsperf.
Each guest image requires 2048 MB by default according to the default settings
in the ``04_vnf.conf`` file.

.. code:: bash

    GUEST_MEMORY = ['2048']

The dpdk startup parameters also require an amount of hugepages depending on
your configuration in the ``02_vswitch.conf`` file.

.. code:: bash

    DPDK_SOCKET_MEM = ['1024', '0']

**NOTE:** Option ``DPDK_SOCKET_MEM`` is used by all vSwitches with DPDK support.
It means Open vSwitch, VPP and TestPMD.

VSPerf will verify hugepage amounts are free before executing test
environments. In case of hugepage amounts not being free, test initialization
will fail and testing will stop.

**NOTE:** In some instances on a test failure dpdk resources may not
release hugepages used in dpdk configuration. It is recommended to configure a
few extra hugepages to prevent a false detection by VSPerf that not enough free
hugepages are available to execute the test environment. Normally dpdk would use
previously allocated hugepages upon initialization.

Depending on your OS selection configuration of hugepages may vary. Please refer
to your OS documentation to set hugepages correctly. It is recommended to set
the required amount of hugepages to be allocated by default on reboots.

Information on hugepage requirements for dpdk can be found at
http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html

You can review your hugepage amounts by executing the following command

.. code:: bash

    cat /proc/meminfo | grep Huge

If no hugepages are available vsperf will try to automatically allocate some.
Allocation is controlled by ``HUGEPAGE_RAM_ALLOCATION`` configuration parameter in
``02_vswitch.conf`` file. Default is 2GB, resulting in either 2 1GB hugepages
or 1024 2MB hugepages.