summaryrefslogtreecommitdiffstats
path: root/conf/03_traffic.conf
blob: 756902f5dcd099ed1b278643eb81dc611c8da67a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
# Copyright 2015-2017 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# ############################
# Traffic gen configuration
# ############################

# log file for all traffic generator related commands
LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'

# TRAFFIC dictionary defines traffic parameters used by all traffic generators.
# Detailed description of TRAFFIC dictionary items follows:
#
#    'traffic_type'  - One of the supported traffic types.
#                      E.g. rfc2544_throughput, rfc2544_back2back
#                      or rfc2544_continuous
#                      Data type: str
#                      Default value: "rfc2544_throughput".
#    'bidir'         - Specifies if generated traffic will be full-duplex (True)
#                      or half-duplex (False)
#                      Data type: str
#                      Supported values: "True", "False"
#                      Default value: "False".
#    'frame_rate'    - Defines desired percentage of frame rate used during
#                      continuous stream tests.
#                      Data type: int
#                      Default value: 100.
#    'multistream'   - Defines number of flows simulated by traffic generator.
#                      Value 0 disables multistream feature
#                      Data type: int
#                      Supported values: 0-65536 for 'L4' stream type
#                                        unlimited for 'L2' and 'L3' stream types
#                      Default value: 0.
#    'stream_type'   - Stream type is an extension of the "multistream" feature.
#                      If multistream is disabled, then stream type will be
#                      ignored. Stream type defines ISO OSI network layer used
#                      for simulation of multiple streams.
#                      Data type: str
#                      Supported values:
#                         "L2" - iteration of destination MAC address
#                         "L3" - iteration of destination IP address
#                         "L4" - iteration of destination port
#                                of selected transport protocol
#                      Default value: "L4".
#    'pre_installed_flows'
#                   -  Pre-installed flows is an extension of the "multistream"
#                      feature. If enabled, it will implicitly insert a flow
#                      for each stream. If multistream is disabled, then
#                      pre-installed flows will be ignored.
#                      Note: It is supported only for p2p deployment scenario.
#                      Data type: str
#                      Supported values:
#                         "Yes" - flows will be inserted into OVS
#                         "No"  - flows won't be inserted into OVS
#                      Default value: "No".
#    'flow_type'     - Defines flows complexity.
#                      Data type: str
#                      Supported values:
#                         "port" - flow is defined by ingress ports
#                         "IP"   - flow is defined by ingress ports
#                                  and src and dst IP addresses
#                      Default value: "port"
#    'flow_control'  - Controls flow control support by traffic generator.
#                      Supported values:
#                         False  - flow control is disabled
#                         True   - flow control is enabled
#                      Default value: False
#                      Note: Currently it is supported by IxNet only
#    'learning_frames' - Controls learning frames support by traffic generator.
#                      Supported values:
#                         False  - learning freames are disabled
#                         True   - learning freames are enabled
#                      Default value: True
#                      Note: Currently it is supported by IxNet only
#    'l2'            - A dictionary with l2 network layer details. Supported
#                      values are:
#        'srcmac'    - Specifies source MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "00:00:00:00:00:00".
#        'dstmac'    - Specifies destination MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "00:00:00:00:00:00".
#        'framesize' - Specifies default frame size. This value should not be
#                      changed directly. It will be overridden during testcase
#                      execution by values specified by list TRAFFICGEN_PKT_SIZES.
#                      Data type: int
#                      Default value: 64
#    'l3'            - A dictionary with l3 network layer details. Supported
#                      values are:
#        'enabled'   - Specifies if l3 layer should be enabled or disabled.
#                      Data type: bool
#                      Default value: True
#                      NOTE: Supported only by IxNet trafficgen class
#        'srcip'     - Specifies source MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "1.1.1.1".
#        'dstip'     - Specifies destination MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "90.90.90.90".
#        'proto'     - Specifies protocol type.
#                      Please check particular traffic generator implementation
#                      for supported protocol types.
#                      Data type: str
#                      Default value: "udp".
#    'l4'            - A dictionary with l4 network layer details. Supported
#                      values are:
#        'enabled'   - Specifies if l4 layer should be enabled or disabled.
#                      Data type: bool
#                      Default value: True
#                      NOTE: Supported only by IxNet trafficgen class
#        'srcport'   - Specifies source port of selected transport protocol.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: int
#                      Default value: 3000
#        'dstport'   - Specifies destination port of selected transport protocol.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: int
#                      Default value: 3001
#    'vlan'          - A dictionary with vlan encapsulation details. Supported
#                      values are:
#        'enabled'   - Specifies if vlan encapsulation should be enabled or
#                      disabled.
#                      Data type: bool
#                      Default value: False
#        'id'        - Specifies vlan id.
#                      Data type: int (NOTE: must fit to 12 bits)
#                      Default value: 0
#        'priority'  - Specifies a vlan priority (PCP header field).
#                      Data type: int (NOTE: must fit to 3 bits)
#                      Default value: 0
#        'cfi'       - Specifies if frames can or cannot be dropped during
#                      congestion (DEI header field).
#                      Data type: int (NOTE: must fit to 1 bit)
#                      Default value: 0
#    'capture'       - A dictionary with traffic capture configuration.
#                      NOTE: It is supported only by T-Rex traffic generator.
#        'enabled'   - Specifies if traffic should be captured
#                      Data type: bool
#                      Default value: False
#        'tx_ports'  - A list of ports, where frames transmitted towards DUT will
#                      be captured. Ports have numbers 0 and 1. TX packet capture
#                      is disabled if list of ports is empty.
#                      Data type: list
#                      Default value: [0]
#        'rx_ports'  - A list of ports, where frames received from DUT will
#                      be captured. Ports have numbers 0 and 1. RX packet capture
#                      is disabled if list of ports is empty.
#                      Data type: list
#                      Default value: [1]
#        'count'     - A number of frames to be captured. The same count value
#                      is applied to both TX and RX captures.
#                      Data type: int
#                      Default value: 1
#        'filter'    - An expression used to filter TX and RX packets. It uses the same
#                      syntax as pcap library. See pcap-filter man page for additional
#                      details.
#                      Data type: str
#                      Default value: ''
#    'scapy'         - A dictionary with definition of a frame content for both traffic
#                      directions. The frame content is defined by a SCAPY notation.
#                      NOTE: It is supported only by the T-Rex traffic generator.
#                      Following keywords can be used to refer to the related parts of
#                      the TRAFFIC dictionary:
#                           Ether_src   - refers to TRAFFIC['l2']['srcmac']
#                           Ether_dst   - refers to TRAFFIC['l2']['dstmac']
#                           IP_proto    - refers to TRAFFIC['l3']['proto']
#                           IP_PROTO    - refers to upper case version of TRAFFIC['l3']['proto']
#                           IP_src      - refers to TRAFFIC['l3']['srcip']
#                           IP_dst      - refers to TRAFFIC['l3']['dstip']
#                           IP_PROTO_sport - refers to TRAFFIC['l4']['srcport']
#                           IP_PROTO_dport - refers to TRAFFIC['l4']['dstport']
#                           Dot1Q_prio  - refers to TRAFFIC['vlan']['priority']
#                           Dot1Q_id    - refers to TRAFFIC['vlan']['cfi']
#                           Dot1Q_vlan  - refers to TRAFFIC['vlan']['id']
#        '0'         - A string with the frame definition for the 1st direction.
#                      Data type: str
#                      Default value: 'Ether(src={Ether_src}, dst={Ether_dst})/'
#                                     'Dot1Q(prio={Dot1Q_prio}, id={Dot1Q_id}, vlan={Dot1Q_vlan})/'
#                                     'IP(proto={IP_proto}, src={IP_src}, dst={IP_dst})/'
#                                     '{IP_PROTO}(sport={IP_PROTO_sport}, dport={IP_PROTO_dport})'
#        '1'         - A string with the frame definition for the 2nd direction.
#                      Data type: str
#                      Default value: 'Ether(src={Ether_dst}, dst={Ether_src})/'
#                                     'Dot1Q(prio={Dot1Q_prio}, id={Dot1Q_id}, vlan={Dot1Q_vlan})/'
#                                     'IP(proto={IP_proto}, src={IP_dst}, dst={IP_src})/'
#                                     '{IP_PROTO}(sport={IP_PROTO_dport}, dport={IP_PROTO_sport})',
TRAFFIC = {
    'traffic_type' : 'rfc2544_throughput',
    'frame_rate' : 100,
    'bidir' : 'True',  # will be passed as string in title format to tgen
    'multistream' : 0,
    'stream_type' : 'L4',
    'pre_installed_flows' : 'No',           # used by vswitch implementation
    'flow_type' : 'port',                   # used by vswitch implementation
    'flow_control' : False,                 # supported only by IxNet
    'learning_frames' : True,               # supported only by IxNet
    'l2': {
        'framesize': 64,
        'srcmac': '00:00:00:00:00:00',
        'dstmac': '00:00:00:00:00:00',
    },
    'l3': {
        'enabled': True,
        'proto': 'udp',
        'srcip': '1.1.1.1',
        'dstip': '90.90.90.90',
    },
    'l4': {
        'enabled': True,
        'srcport': 3000,
        'dstport': 3001,
    },
    'vlan': {
        'enabled': False,
        'id': 0,
        'priority': 0,
        'cfi': 0,
    },
    'capture': {
        'enabled': False,
        'tx_ports' : [0],
        'rx_ports' : [1],
        'count': 1,
        'filter': '',
    },
    'scapy': {
        'enabled': False,
        '0' : 'Ether(src={Ether_src}, dst={Ether_dst})/'
              'Dot1Q(prio={Dot1Q_prio}, id={Dot1Q_id}, vlan={Dot1Q_vlan})/'
              'IP(proto={IP_proto}, src={IP_src}, dst={IP_dst})/'
              '{IP_PROTO}(sport={IP_PROTO_sport}, dport={IP_PROTO_dport})',
        '1' : 'Ether(src={Ether_dst}, dst={Ether_src})/'
              'Dot1Q(prio={Dot1Q_prio}, id={Dot1Q_id}, vlan={Dot1Q_vlan})/'
              'IP(proto={IP_proto}, src={IP_dst}, dst={IP_src})/'
              '{IP_PROTO}(sport={IP_PROTO_dport}, dport={IP_PROTO_sport})',
    }
}

#path to traffic generators directory.
TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')

# traffic generator to use in tests
#TRAFFICGEN = 'TestCenter'
TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
#TRAFFICGEN = 'Moongen'
#TRAFFICGEN = 'Trex'

# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_PKT_SIZES = (64,)

TRAFFICGEN_DURATION = 30

TRAFFICGEN_RFC2544_TESTS = 1
TRAFFICGEN_RFC2889_TRIALS = 1
TRAFFICGEN_LOSSRATE = 0.0

##############################
# DUMMY Configuration -- BEGIN

# By default, dummy traffic generator asks for "measured" values.
# Following dictionary allows to preconfigure these values and
# to avoid user interaction. It can be useful for automated
# integration tests.
# Example of values for continuous traffic type:
#   TRAFFICGEN_DUMMY_RESULTS{'frames rx': 500000,
#                            'frames tx': 500000,
#                            'rx rate %': 100,
#                            'tx rate %': 100,
#                            'frameloss %': 0,
#                            'min latency': 1,
#                            'max latency': 15,
#                            'avg latency': 2.5,
#                           }
#
TRAFFICGEN_DUMMY_RESULTS = {}

# DUMMY Configuration -- END
############################

#############################
# IXIA Configuration -- BEGIN

# path to 'ixos' install path
TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'

# network address of IXIA chassis
TRAFFICGEN_IXIA_HOST = ''

TRAFFICGEN_IXIA_CARD = ''

TRAFFICGEN_IXIA_PORT1 = ''

TRAFFICGEN_IXIA_PORT2 = ''

TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnetwork/lib/IxTclNetwork'

# IxNetwork host IP address
TRAFFICGEN_IXNET_MACHINE = ''
TRAFFICGEN_IXNET_PORT = ''
TRAFFICGEN_IXNET_USER = ''
TRAFFICGEN_IXNET_CHASSIS = ''

# The result directory on $TRAFFICGEN_IXNET_MACHINE
TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''

# The result directory on DUT. This needs to map to the same directory
# as the previous one
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''

# directory with 3rd party scripts generated by IXIA tools
TRAFFICGEN_IXIA_3RD_PARTY = os.path.join(ROOT_DIR, '3rd_party/ixia')

# default TCL script, which will be used for IXNETWORK configuration
TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544.tcl'

# IXIA Configuration -- END
###########################


###########################################
# Spirent TestCenter Configuration -- BEGIN

# Path to Python 2 executable
TRAFFICGEN_STC_PYTHON2_PATH = "/bin/python2.7"

# Path to the location of the TestCenter files
TRAFFICGEN_STC_TESTCENTER_PATH = os.path.join(ROOT_DIR, 'tools/pkt_gen/testcenter')

# Name of the TestCenter RFC2544 Tput helper python script
TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"

# Name of the Testcenter RFC2899 Tput Helper Python Scripts
TRAFFICGEN_STC_RFC2889_TEST_FILE_NAME = "testcenter-rfc2889-rest.py"

# 2889 Port Locations
TRAFFICGEN_STC_RFC2889_LOCATION = ""

# The address of the Spirent Lab Server to use
TRAFFICGEN_STC_LAB_SERVER_ADDR = ""

# The address of the Spirent License Server in your environment
TRAFFICGEN_STC_LICENSE_SERVER_ADDR = ""

# The address of the TestCenter chassis that holds the east port
TRAFFICGEN_STC_EAST_CHASSIS_ADDR = ""

# The slot number of the card that holds the east port
TRAFFICGEN_STC_EAST_SLOT_NUM = ""

# The port number on the card that holds the east port
TRAFFICGEN_STC_EAST_PORT_NUM = ""

# The address of the TestCenter chassis that holds the west port
TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""

# The slot number of the card that holds the west port
TRAFFICGEN_STC_WEST_SLOT_NUM = ""

# The port number on the card that holds the west port
TRAFFICGEN_STC_WEST_PORT_NUM = ""

# The friendly name to identify the Spirent Lab Server test session
TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
# The directory to copy results to

TRAFFICGEN_STC_RESULTS_DIR = os.path.join(ROOT_DIR, "Results")
#  The prefix for the CSV results file

TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
# The number of trials to execute during the test

TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"

# The duration of each trial executed during the test, in seconds
TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"

# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"

# The search mode used to find the throughput rate, COMBO, STEP or BINARY
TRAFFICGEN_STC_SEARCH_MODE = "BINARY"

# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
TRAFFICGEN_STC_LEARNING_MODE = "AUTO"

# The minimum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"

# The maximum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"

# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"

# When SearchMode is STEP, the percent increase in load per step
TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"

# The minimum percentage of load adjustment between iterations
TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"

# The frame size, in bytes
TRAFFICGEN_STC_FRAME_SIZE = "256"

# The maximum acceptable frame loss percent in any iteration
TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"

# The address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_ADDR = ""

# The gateway address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = ""

# The address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_ADDR = ""

# The gateway address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = ""

# Print additional information to the terminal during the test
TRAFFICGEN_STC_VERBOSE = "True"

# Spirent TestCenter Configuration -- END
#########################################

#############################
# Xena Configuration -- BEGIN

# Xena traffic generator connection info
TRAFFICGEN_XENA_IP = ''
TRAFFICGEN_XENA_PORT1 = ''
TRAFFICGEN_XENA_PORT2 = ''
TRAFFICGEN_XENA_USER = ''
TRAFFICGEN_XENA_PASSWORD = ''
TRAFFICGEN_XENA_MODULE1 = ''
TRAFFICGEN_XENA_MODULE2 = ''

# Xena Port IP info
TRAFFICGEN_XENA_PORT0_IP = '192.168.199.10'
TRAFFICGEN_XENA_PORT0_CIDR = 24
TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'

# Xena RFC 2544 options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'

# Xena RFC 2544 final verification options
TRAFFICGEN_XENA_RFC2544_VERIFY = False
TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
# Number of verify attempts before giving up...
TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
# Logic for restarting binary search, see documentation for details
TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True

# Xena Continuous traffic options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3

# Xena Configuration -- END
###########################

###################################################
# MoonGen Configuration and Connection Info-- BEGIN

# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ''
TRAFFICGEN_MOONGEN_USER = ''
TRAFFICGEN_MOONGEN_BASE_DIR = ''
TRAFFICGEN_MOONGEN_PORTS = ''
# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
# Today only 10 Gbps is supported
TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''

# MoonGen Configuration and Connection Info-- END
#################################################

################################################
# Trex Configuration and Connection Info-- BEGIN

# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
# Example: TRAFFICGEN_TREX_USER = 'root'
# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
TRAFFICGEN_TREX_HOST_IP_ADDR = ''
TRAFFICGEN_TREX_USER = ''
TRAFFICGEN_TREX_BASE_DIR = ''
TRAFFICGEN_TREX_PORT1 = ''
TRAFFICGEN_TREX_PORT2 = ''
# RFC2544 Throughput execution will end after threshold below is reached.
# It defines maximal difference between frame rate of successful (i.e. defined
# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations.
TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05
# Latency statistics are collected by separate stream created for each interface.
# Parameter below defines frequency of packets used for latency measurement in PPS.
# Value 0 will disable latency specific streams.
TRAFFICGEN_TREX_LATENCY_PPS = 1000
# Enablement of learning packets before sending test traffic
TRAFFICGEN_TREX_LEARNING_MODE = True
TRAFFICGEN_TREX_LEARNING_DURATION = 5
# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
TRAFFICGEN_TREX_PROMISCUOUS = False
# Enable below options to force T-rex api to attempt to use speed specified on server
# side when pushing traffic. For 40G use 40000. For 25G use 25000.
TRAFFICGEN_TREX_FORCE_PORT_SPEED = False
TRAFFICGEN_TREX_PORT_SPEED = 10000 # 10G

PATHS['trafficgen'] = {
    'Trex': {
        'type' : 'src',
        'src': {
            'path': os.path.join(ROOT_DIR, 'src/trex/trex/scripts/automation/trex_control_plane/stl')
    }
  }
}
# TRex validation option for RFC2544
TRAFFICGEN_TREX_VERIFICATION_MODE = False
TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
# TREX Configuration and Connection Info-- END
##############################################