summaryrefslogtreecommitdiffstats
path: root/vswitches
AgeCommit message (Collapse)AuthorFilesLines
2018-05-28connections: Introduction of generic APIMartin Klozik5-181/+222
Redesign of vSwitch and vSwitch controller classes, to use generic connection methods for configuration of vSwitch. This API is more generic and vSwitch agnostic, thus deployment scenarios like P2P, PVP, PVVP (i.e. PVVPx) can be used for all (currently) supported vSwitches. Usage of new API will simplify an introduction of new vSwitches in the future. This patchset introduces following changes: * OVS: implementation of add_, del_, dump_ connection(s) and their validation methods * VPP: bidir parameter removed - it is up to the deployment scenario implementation to take care about bidirectional connections * P2P and PXP controllers were updated to use connection methods instead of flow related methods. Thus standard TCs will support both OVS and VPP. NOTE, PVPV is not supported for VPP (yet?). * refactoring of vSwitch interfaces and inherited classes * VPP step driven TCs were replaced by standard TCs with appropriate deployment scenarios. This is for backward compatibility with TC reporting. Once reporting of VPP TC results into results DB will be modified, this TCs can be removed. * OVS routing tables support was generalized to support P2P and PXP deployments and step driven TCs. Usage of OVS routing tables is now configurable (turned off by default) for better comparison of results among various vSwitches. * Multistream pre_installed_flows feature was generalized to support P2P and PXP deployments and step driven TCs. * IxNet: TRAFFIC['l4']['dstport'] will be used as a start value for port iteration if L4 multistream feature is enabled. * OVS: default flow template is now configurable via OVS_FLOW_TEMPLATE * OVS: support of TRAFFIC['flow_type']='ip' was generalized to work with connection methods (i.e. with P2P and PXP deployments and step driven TCs) * integration TCs: modification of integration TCs and their macros to utilize new generic connection based API * CI: list of TCs for VERIFY & MERGE jobs was changed to run the same generic tests for both OVS & VPP * documentation update * small fixes and improvements JIRA: VSPERF-579 Change-Id: If4e6e6037929eab9f16c2bbcb8a0fb30e5d6f9b0 Signed-off-by: Martin Klozik <martin.klozik@tieto.com> Reviewed-by: Richard Elias <richard.elias@tieto.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-05-28Merge "vswitches/ovs: delete flows on stop"Martin Klozik1-1/+2
2018-05-24vswitches/ovs: delete flows on stopElias Richard1-1/+2
While removing bridges, also remove any flows created on them. JIRA: VSPERF-577 Change-Id: Ie0cbe65c823e690c9b3e5149ff2af0b56809fccd Signed-off-by: Richard Elias <richard.elias@tieto.com> Reviewed-by: Martin Klozik <martin.klozik@tieto.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-05-24vpp: Implement missing dump and del functionsMartin Klozik1-5/+7
Implementaiton of VPP methods dump_xconnect(), del_xconnect() and del_bridge(). JIRA: VSPERF-576 Change-Id: Ifb3094d11d1b135e9a33effb1bf6d502db319a30 Signed-off-by: Martin Klozik <martin.klozik@tieto.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richard.elias@tieto.com>
2018-04-19vswitches/ovs: delete bridges on stopJulien Meunier1-0/+4
On stop, remove all created bridges in order to clean the working environment. Moreover, when an OVS bridge is deleted, remove also all attached ports. By the way, as the context manager of OFBridge is never used by the current test implementation and by any OVS vswitches in order to manage their creation/deletion, let's remove this dead code. JIRA: VSPERF-570 Change-Id: I7ce62d56a8a2fe7b45e693f3c2dd91e1b435567c Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
2018-03-23python: Pylint 1.8.2 code conformityRichard Elias3-33/+35
Updated master Python scripts to conform to the newer pylint 1.8.2 standard. JIRA: VSPERF-563 Change-Id: I19305a008a2e22c2f4841aa83fed85fbdc2d549c Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-01-05vswitch: Improve add_phy_port error messagesMartin Klozik3-6/+8
In case that vSwitch can't add required number of physical ports, then error message should be printed. Previous implementation was not consistent. Thus error handling has been united across all vswitches and message explicitly states the cause of the failure. NOTE: A better solution would be a refactoring of all vSwitch classes to follow VPP port handling and to move port related structures and physical port check into parent vswitch class. JIRA: VSPERF-555 Change-Id: Id09a61432ea93e261f563254829348ac61f5dc8a Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Jose Lausuch <jalausuch@suse.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-28ovs_vanilla: Fix vswitch shutdown processMartin Klozik1-1/+6
Datapath must be removed before vswitch termination. JIRA: VSPERF-548 Change-Id: I7408ddc1b21e2bc02a44785dca07d9c026bc28c1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-15Merge "teststeps: Improvements and bugfixing of teststeps"Martin Klozik3-1/+35
2017-11-14vpp: Define vppctl socket nameMartin Klozik1-1/+8
Newer versions of VPP require an explicit definition of CLI socket file for proper functionality. Otherwise vppctl is not able to connect to running vpp process and thus vsperf is not able to configure and control vpp. Change-Id: Id0df75fd0894e22b1b4d7fa05e16f49efe20d3ab Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-06vpp: Multiqueue support for VPPMartin Klozik1-1/+7
VPP class was updated to configure RX queues of VPP interfaces based on VSWITCH_DPDK_MULTI_QUEUES value. Change-Id: I855dbaef86cf935b2639976e8b1757eb1af4e9ac Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-03teststeps: Improvements and bugfixing of teststepsMartin Klozik3-1/+35
This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-19CI: Update hugepages configurationMartin Klozik2-10/+12
Changes introduced by this patch: * Configure more hugepages to be used during CI run. * Fix detection of correct ovs-vswitchd execution. * Skip VPP shutdown overhead in case that VPP execution has failed. Change-Id: Id1badd61334141dcc331691af4a1401a09d06807 Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-07-21dpdk: Support dpdk vhost-user client modeMartin Klozik2-3/+16
Support of vhost-user client mode has been added for both OVS and VPP. VSPERF configures vhost-user server mode in vswitches by default for backward compatibility. Support of vhost-user server mode is deprecated in OVS and it can be removed in future releases. Once it will happen, we have to change vsperf default behavior to usage of vhost-user client ports at vswitch side. This patch also fixes processing of boolean configuration parameters passed via --test-params option. In the past it was not possible to set boolean value to False through --test-params option. JIRA: VSPERF-517 Change-Id: I65e341f820edd6c720043a4acc74c5140b05db18 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-05-03build: Automated VPP buildMartin Klozik1-2/+34
VSPERF makefiles were updated to automatically download and compile VPP. VPP will not be installed into the OS, but it will be executed from VSPERF's src subdirectory. Thus underlying OS is not affected by VPP build required by VSPERF. It also allows quick switch among different versions of various tools used by VSPERF. As part of this patch, VERIFY and MERGE CI jobs were updated to build VPP and test it with basic set of integration tests. JIRA: VSPERF-493 Change-Id: I958b9031c4fefc87c4c63a471d2ba1a0db1eaaa4 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-30jumbo_frame: Add jumbo frame supportChristian Trautman2-0/+10
Add jumbo frame support for all packet forwarding applications inside guest for pxp testing. Enable jumbo frame support for OvsVanilla, OvsDpdkVhostUser, and Packet forwarding. Add minor fix for missing method issue when running packet forwarding tests. The get_version method was missing in the packet_forwaring core module. JIRA: VSPERF-501 Change-Id: Ia99975f47c64259ed2566bde3c85b2779c309e80 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-03-20vpp: Reporting update related to VPPMartin Klozik3-1/+36
VSPERF reports were updated to contain vSwitch name. In case of VPP, it is not possible to read its version if VPP is not running. Thus VSPERF was enhanced to support tool version check during its runtime. This mechanism can be enhanced to support e.g. VNF in the future. JIRA: VSPERF-496 Change-Id: I74b47505e35340eead165d9b588e9cc15c058bbf Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-15vpp: Initial support of VPP vSwitchMartin Klozik4-13/+488
Support of VPP was implemented into VSPERF. Initial implementation uses step driven testcases to configure P2P, PVP and PVVP network scenarios. These testcases were prepared for three RFC2544 traffic types, i.e. throughput, continuous stream and back to back. VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS. It is possible to use three types of l2 port connection supported by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features. Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE. JIRA: VSPERF-495 Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-02-17license: Add license info to all project filesgoldammx2-6/+11
All files were updated with license header. In case of binary files is license stored in LICENSE file stored in the same directory. Packages.txt was removed, because file has not been used.List of packages differs according OS distribution, all of neccesary packages are include in instalation scripts JIRA: VSPERF-489 Change-Id: I6ecae21b8db2a0f22fa5a66f9525352080f1fcc0 Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-02-13pylint: Fixing pylint errors and warningsgoldammx3-27/+26
All python files must reach pylint score 10/10. This will be regularly verified by Jenkins jobs to keep constant code quality. VSPERF specific pylintrc file was updated according to the vsperf coding standards. Distro version included in reports will be slightly different, due to migration to new python package distro. Previously used platform.distro() will be deprecated since python 3.7. JIRA: VSPERF-487 Change-Id: I934120208b9624787a3567ccaa49e14d77d7a5bf Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-23dpdk_vhostuser_mq_fix: Fixes erroneous error message with MQ and dpdkChristian Trautman1-5/+0
Removes un-needed code to set multi-queue option on vhostuser ports. JIRA: VSPerf-471 Change-Id: I9f58e53d9a9bb62ef5ed441a7b4b1dea37a2f557 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-11ovs-dpdk port setup: specify PCI slot.Antonio_Fischetti1-1/+5
Update to use options:dpdk-devargs coming from the Arbitray Port Naming feature lately upstreamed in Ovs-DPDK project. See Commit ID: 55e075e65ef9ecbd70e5e0fada2704c3d73724d8. By this new param you can explicitly select a PCI slot for a dpdk port. JIRA: VSPERF-449 Change-Id: Id6028cc4efbaf228a99c6f0a346a8e96a82e43a6 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik martinx.klozik@intel.com Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik1-9/+2
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-10-09CLI: add Multiqueue params.Antonio Fischetti1-0/+6
This patch implements the following new CLI parameters that can be used in the --test-params list. 1. guest_nic_queues, which overrides all GUEST_NIC_QUEUES values 2. guest_testpmd_txq, which overrides all GUEST_TESTPMD_TXQ 3. guest_testpmd_rxq, which overrides all GUEST_TESTPMD_RXQ 4. guest_testpmd_nb_cores, which overrides all GUEST_TESTPMD_NB_CORES values 5. guest_testpmd_cpu_mask, which overrides all GUEST_TESTPMD_CPU_MASK values 6. vswitch_dpdk_multi_queues, which overrides VSWITCH_DPDK_MULTI_QUEUES 7. guest_smp, which overrides all GUEST_SMP values 8. guest_core_binding, which overrides all GUEST_CORE_BINDING values When they are present in the CLI the corresponding settings from the configuration files will be overridden. As an example a usage can be: ./vsperf --test-params "guest_nic_queues=2;guest_testpmd_txq=1;\ guest_testpmd_rxq=1;guest_testpmd_nb_cores=1"... v2: rebase + rework to add other CLI params as suggested and update doc. v3: changes in 'testusage.rst' doc. JIRA: VSPERF-371 Change-Id: I140d6e068c1653d21aaa0df27532a48c4a12c151 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-09-15paths: Support binary packagesMartin Klozik3-42/+51
Currently VSPERF supports OVS, DPDK and QEMU built from the source code only. In some cases it is required to support installation of these tools from binary packages available for given linux distribution. Thus VSPERF configuration and code was modified to suport both source and binary versions of tools. This can be configured perf tool, so various combinations of source and binary version are supported. Together with new configuration also a handling of kernel modules was modified to automatically detect and load module dependencies. JIRA: VSPERF-340 JIRA: VSPERF-339 Change-Id: I855cb438cbd8998bdc499613ea5e7de2526299d7 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Otto Sabart <osabart@redhat.com>
2016-09-01multi VM: Multi VMs in serial or parallelMartin Klozik1-3/+9
Support for deployment scenarios with any number of VMs in both serial and parallel configuration. Detailed content of the patch: * VswitchControllerPXP class for multi VM support * pvvpxx and pvpvxx deployments for xx VMs in serial respective parallel configuration * special GUEST_ options expansion to requested number of VMs; * support of GUEST_ options specific macros #VMINDEX, #MAC(), #IP() and #EVAL() * all GUEST specific options are turned to lists to be VM specific * support for VM with 1 NIC * support for VM with multiple NIC pairs; traffic is routed in serial or parallel between NIC paris based on deployment scenario * support for PVVP and PVPV scenarios using VMs with different numbers of NICs JIRA: VSPERF-361 Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-08-24Vanilla_Multi_Queue: Add vanilla ovs multi-queue functionalityChristian Trautman2-18/+22
Adds multi-queue for vanilla OVS using virtio-net. TunTap ports will use multi_queue parameter when ports are created/deleted if guest nic queues are enabled and vswitch is ovs vanilla. Virtio net will now add guest nic queues to qemu command line if appropriate. Reworked multi-queue documentation to reflect these changes. Adds vhost net thread affinitization which is recommended when performing vanilla ovs multi-queue. Guests will require ethtool if using l2fwd or linux bridge as the loopback application when vanilla ovs multi-queue is enabled. Modified dpdk setting in vswitch conf to be better worded for separation from vanilla ovs multi-queue. Updated release and installation doc for new vloop image that includes required ethtool utility. JIRA: VSPERF-373 Change-Id: Idb550515190b1a93390308c11f54da368f962512 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-08-18cuse: Remove vHost Cuse supportMartin Klozik1-18/+8
Support of vHost Cuse interface is not supported by OVS anymore, so it was removed also from VSPERF. Cuse can be used with older VSPERF release if needed. JIRA: VSPERF-376 Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
2016-08-18Merge "old_style_multi-queue: Allows for multi-queue with ovs <= 2.5.0"Martin Klozik1-3/+12
2016-08-16integration: Support for VxLAN TC without using overlay traffic gen.Sugesh Chandran1-0/+32
The test case for verifying the vxlan tunneling feature without using any ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and generate tunnel traffic in the deployment. The packet flow in the test case is as follows TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT ENCAP-PKT - Encapsulate the ingress packet to a tunnel type. MOD-PKT - Modify the tunnel header to match the following decap interface. DECAP-PKT - Decapsulate the newly generated tunneled packet. Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54 Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
2016-08-16old_style_multi-queue: Allows for multi-queue with ovs <= 2.5.0Christian Trautman1-3/+12
Enables multi-queue option for OVS versions 2.5.0 or less with dpdk. Instead of enabling MQ on a port by port basis this sets the global MQ option after starting the ovs switch. JIRA: VSPERF-372 Change-Id: I245c76779695518d0005122d8214bbf3f141bb96 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-19ovs-appctl fix: Fixes ovs-appctl by placing pid file appropriatelyChristian Trautman1-2/+2
ovs-appctl was broken due to a previous commit which changed the location of the ovs-vswitchd pid file. This fixes it by placing the pid back in the default location where ovs-appctl is looking for. JIRA: VSPERF-315 Change-Id: I4ae87ad566acb69ac9d565a3a77865f5a6861b93 Signed-off-by: MartinX Klozik <martinx.klozik@intel.com> Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-13dpdk: Support of DPDK16.07Martin Klozik3-3/+1
DPDK 16.07 changed the default log level of DPDK enabled applications. Detection of the end of OVS initialization procedure has been changed to work for various DPDK versions and for both DPDK and Vanilla OVS. JIRA: VSPERF-316 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-07-08Merge "rstp-stp: Add basic functions for stp/rstp enable on ovs"Christian Trautman1-3/+73
2016-07-07rstp-stp: Add basic functions for stp/rstp enable on ovsChristian Trautman1-3/+73
Add basic functions to enable/disable spanning tree protocols on the bridge. Also adds bridge info function to retrieve other bridge information. JIRA: VSPERF-314 Change-Id: Ic72c5a2a9d16aab1b95428ce37042a5b536481aa Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-06-29multi-queue: Add basic multi-queue functionalityChristian Trautman1-2/+8
Adds support for multi-queue using the following config. * VNF = QemuDpdkVhostUser * VSWITCH = OvsDpdkVhost * Guest Loopback as testpmd Adds CPU mask, nbcore, rxq, and txq options for testpmd. Adds option for guest nic multi-queue. Adds option for dpdkvhostuser and dpdk multi-queue enable JIRA: VSPERF-309 Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-23bugfix: Remove dependency on ifconfigMartin Klozik1-2/+6
VSPERF uses ifconfig at several places to bring up a networking interface. However ifconfig has been deprecated by iproute2 package and it is not available in standard installation of many Linux distributions. Thus all calls of ifconfig have been replaced by call of 'ip' tool. Change-Id: I935eaf85b6082e4641d12cffea3e0882c634e5ea JIRA: VSPERF-299 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-12ovsdb: Add delay after ovsdb startMartin Klozik1-1/+4
Ovsdb must be up and running before any configuration option is modified or vswitchd is executed. Otherwise options won't be modified in DB and/or vswitchd won't be able to use correct options during start up. Change-Id: I04948d383272f2e694ec685b3a21d639068125ca JIRA: VSPERF-291 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-06dpdk: Support new way of DPDK configuration in ovs-vswitchdMartin Klozik3-19/+174
Configuration of DPDK options in ovs-vswitchd has changed. Previously used option --dpdk was deprecated and all DPDK related options have to be configured through ovsdb via ovs-vsctl calls. VSPERF was modified to detect and use correct version of DPDK configuration. New configuration options should be put into VSWITCHD_DPDK_CONFIG dictionary. VSPERF classes specific to OVS were refactored. Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb JIRA: VSPERF-291 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-04bugfix: Graceful shutdown of VM - improvementMartin Klozik1-1/+1
Cleanup phase of PVVP scenario sometimes causes server reboot. Following updates were made to prevent reboots: * better generic process termination procedure * ovsdb is terminated after vswitchd termination * vswitchd is terminated directly instead of parent sudo process * already running VNFs are terminated in case of failure during VNF start() Change-Id: Ic09d60d7bfdea01c84a2685ede3d0316f0d09be7 JIRA: VSPERF-271 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-04-14sriov: Support of SRIOV and Qemu PCI passthroughMartin Klozik1-5/+4
Generic support of SRIOV has been added. Virtual interfaces can be used in multiplei scenarios instead of physical NICs. Virtual functions can be directly accessed from VM by PCI passthrough method. Another option is to use VFs with vSwtich to evaluate impact on performance. Additonal modifications: * Automatic detection of NIC details has been added to simplify configuration. * Obsoleted configuration options have been removed. * Logging usage within vsperf script was fixed. * Vsperf main was refactored and final cleanup function added. * Configurable forwarding mode of TestPMD executed inside VM. JIRA: VSPERF-198 Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-21integration: Support of integration testcasesMartin Klozik3-227/+261
Generic support for integration testcases with first set of tests for vswitch testing. New test option "TestSteps" has been introduced to define test step by step directly in configuration file. In case that this concept will be accepted, there are plenty of possibilities for future improvements. For example: * use it also for performance tests without explicit call of validation methods * introduce step macros for repetitive scenarios, so new tests can be easily written * further generalization, which would go beyond usage of controllers and will operate directly with vswitch, vnf and trafficgen objects Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2 JIRA: VSPERF-212 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-23CI: Generate test report and push logs and report to the artifactoryMartin Klozik2-2/+2
Script for CI job execution automatically generates final test report, collects log files and pushes these results into artifactory. Support for branch specific configuration file has been added. Change-Id: Ifdf13b1c4c389f8d20dbc8e0ed99f43273e0820b JIRA: VSPERF-181 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang1-4/+9
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang3-13/+114
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik3-5/+12
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-12vswitches: Remove datapath after stopping OVSDino Simeon Madarang1-1/+4
Remove the datapath that OVS creates, ovs-system, (can be viewed by ip link) after running OVS vanilla tests. Change-Id: I087c7b3f5afa546258227939ffcb38f0192f0d98 JIRA: VSPERF-175 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-11-03bugfix of Vanilla OVS testing scenariosMartin Klozik1-1/+0
Automatic selection of OVS and DPDK directories must be performed before initialization of modules is called. Otherwise modules will use wrong values with unpredictable results. Default directory values have been changed to point to sources build by make. Clean&sweep of directory usage was performed. Configuration file for pylint has been renamed to follow pylint naming convention. Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb JIRA: VSPERF-121 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-28Stop OVS from generating misleading add-br errorsDino Simeon Madarang3-7/+13
Create bridge and set datapath_type in 1 transaction to prevent OVS from generating misleading error messages which jenkins considers as build errors. Update vswitch interface to include optional parameters. Change-Id: I668f474ea909b284f3726807aab42d52ae2fb504 JIRA: VSPERF-122 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2015-10-21Add Pylint to VSPERF commit gateMartin Klozik1-1/+1
Initial pylint config file has been created to follow current code structure and design. A few issues have been fixed, so currently 56 of 67 files have rating 10/10. There are still issues to be fixed, mainly TODOs/FIXMEs and missing impelentation of abstract class members. Change-Id: Icf5b12c2150258f8ac657f8d50b47a697d1660a0 JIRA: VSPERF-91 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>