summaryrefslogtreecommitdiffstats
path: root/vswitches/ovs_vanilla.py
AgeCommit message (Collapse)AuthorFilesLines
2016-09-01multi VM: Multi VMs in serial or parallelMartin Klozik1-3/+9
Support for deployment scenarios with any number of VMs in both serial and parallel configuration. Detailed content of the patch: * VswitchControllerPXP class for multi VM support * pvvpxx and pvpvxx deployments for xx VMs in serial respective parallel configuration * special GUEST_ options expansion to requested number of VMs; * support of GUEST_ options specific macros #VMINDEX, #MAC(), #IP() and #EVAL() * all GUEST specific options are turned to lists to be VM specific * support for VM with 1 NIC * support for VM with multiple NIC pairs; traffic is routed in serial or parallel between NIC paris based on deployment scenario * support for PVVP and PVPV scenarios using VMs with different numbers of NICs JIRA: VSPERF-361 Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-08-24Vanilla_Multi_Queue: Add vanilla ovs multi-queue functionalityChristian Trautman1-12/+15
Adds multi-queue for vanilla OVS using virtio-net. TunTap ports will use multi_queue parameter when ports are created/deleted if guest nic queues are enabled and vswitch is ovs vanilla. Virtio net will now add guest nic queues to qemu command line if appropriate. Reworked multi-queue documentation to reflect these changes. Adds vhost net thread affinitization which is recommended when performing vanilla ovs multi-queue. Guests will require ethtool if using l2fwd or linux bridge as the loopback application when vanilla ovs multi-queue is enabled. Modified dpdk setting in vswitch conf to be better worded for separation from vanilla ovs multi-queue. Updated release and installation doc for new vloop image that includes required ethtool utility. JIRA: VSPERF-373 Change-Id: Idb550515190b1a93390308c11f54da368f962512 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-13dpdk: Support of DPDK16.07Martin Klozik1-1/+0
DPDK 16.07 changed the default log level of DPDK enabled applications. Detection of the end of OVS initialization procedure has been changed to work for various DPDK versions and for both DPDK and Vanilla OVS. JIRA: VSPERF-316 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-05-23bugfix: Remove dependency on ifconfigMartin Klozik1-2/+6
VSPERF uses ifconfig at several places to bring up a networking interface. However ifconfig has been deprecated by iproute2 package and it is not available in standard installation of many Linux distributions. Thus all calls of ifconfig have been replaced by call of 'ip' tool. Change-Id: I935eaf85b6082e4641d12cffea3e0882c634e5ea JIRA: VSPERF-299 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-06dpdk: Support new way of DPDK configuration in ovs-vswitchdMartin Klozik1-5/+3
Configuration of DPDK options in ovs-vswitchd has changed. Previously used option --dpdk was deprecated and all DPDK related options have to be configured through ovsdb via ovs-vsctl calls. VSPERF was modified to detect and use correct version of DPDK configuration. New configuration options should be put into VSWITCHD_DPDK_CONFIG dictionary. VSPERF classes specific to OVS were refactored. Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb JIRA: VSPERF-291 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-04-14sriov: Support of SRIOV and Qemu PCI passthroughMartin Klozik1-5/+4
Generic support of SRIOV has been added. Virtual interfaces can be used in multiplei scenarios instead of physical NICs. Virtual functions can be directly accessed from VM by PCI passthrough method. Another option is to use VFs with vSwtich to evaluate impact on performance. Additonal modifications: * Automatic detection of NIC details has been added to simplify configuration. * Obsoleted configuration options have been removed. * Logging usage within vsperf script was fixed. * Vsperf main was refactored and final cleanup function added. * Configurable forwarding mode of TestPMD executed inside VM. JIRA: VSPERF-198 Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-21integration: Support of integration testcasesMartin Klozik1-114/+15
Generic support for integration testcases with first set of tests for vswitch testing. New test option "TestSteps" has been introduced to define test step by step directly in configuration file. In case that this concept will be accepted, there are plenty of possibilities for future improvements. For example: * use it also for performance tests without explicit call of validation methods * introduce step macros for repetitive scenarios, so new tests can be easily written * further generalization, which would go beyond usage of controllers and will operate directly with vswitch, vnf and trafficgen objects Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2 JIRA: VSPERF-212 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-23CI: Generate test report and push logs and report to the artifactoryMartin Klozik1-1/+1
Script for CI job execution automatically generates final test report, collects log files and pushes these results into artifactory. Support for branch specific configuration file has been added. Change-Id: Ifdf13b1c4c389f8d20dbc8e0ed99f43273e0820b JIRA: VSPERF-181 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang1-1/+48
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik1-2/+2
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-12vswitches: Remove datapath after stopping OVSDino Simeon Madarang1-1/+4
Remove the datapath that OVS creates, ovs-system, (can be viewed by ip link) after running OVS vanilla tests. Change-Id: I087c7b3f5afa546258227939ffcb38f0192f0d98 JIRA: VSPERF-175 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-28Stop OVS from generating misleading add-br errorsDino Simeon Madarang1-2/+2
Create bridge and set datapath_type in 1 transaction to prevent OVS from generating misleading error messages which jenkins considers as build errors. Update vswitch interface to include optional parameters. Change-Id: I668f474ea909b284f3726807aab42d52ae2fb504 JIRA: VSPERF-122 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2015-10-21Add Pylint to VSPERF commit gateMartin Klozik1-1/+1
Initial pylint config file has been created to follow current code structure and design. A few issues have been fixed, so currently 56 of 67 files have rating 10/10. There are still issues to be fixed, mainly TODOs/FIXMEs and missing impelentation of abstract class members. Change-Id: Icf5b12c2150258f8ac657f8d50b47a697d1660a0 JIRA: VSPERF-91 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-20Implement support of 'insmod' and 'modprobe' commands into ModuleManagerMartin Klozik1-2/+2
Module manager has been enhanced to support both 'insmod' and 'modprobe' commands for kernel module insertion. In case, that .ko suffix is detected then insmod will be used otherwise modprobe will be called. This allows user to specify full path to each module. For example vanilla ovs module can be defined as "OVS_DIR_VANILLA + 'datapath/linux/openvswitch.ko'" to load kernel module matching OVS vanilla source tree version. Change-Id: Ib8d16eca84449ad34d6b307ab836f58d2f0d341b JIRA: VSPERF-116 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-12Enable PVP and PVVP deployments for Vanilla OVSMartin Klozik1-2/+51
Support for PVP and PVVP scenerios using Vanilla OVS was added. VMs are configured to forward traffic between virtual interfaces by standard linux capabilities. Traffic generator script was updated to accept MAC and IP address configuration to allow VM forwarding configuration. VSPERF-66, VSPERF-70 Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-08-06Vanilla OVS support implementationMichal Weglicki1-0/+132
JIRA: VSPERF-57 This patch implements Vanilla OVS support.It contains: * New IVswitch implementation: OvsVanilla, * New configuration contants, * New mandatory configuration variable: VSWITCH_VANILLA_PHY_PORT_NAMES for Vanilla OVS has been added, * Virtual ports are not yet implemented, * Some kernel modules wrapping methods has been moved from dpdk.py to tools. * Fixed bug where ovsdb hasn't been killed at the end of test case run on some platforms. Change-Id: I21a0d84dbc4004aae564d5547387a2563f2d1e5b Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>