Age | Commit message (Collapse) | Author | Files | Lines |
|
Adds options to Xena for testing options when running RFC 2544
throughput testing.
JIRA: VSPERF-369
Change-Id: I3145bd1a4d697d7b06cafda4f9d77cce859d1839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Instead of hard coding line speed numbers for rate calcuation,
MoonGen should use its class object initialized at start time.
JIRA: VSPERF-368
Change-Id: I68c688f8c244df16d98cfd15efabf491a317256b
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Change hugepage detection to check if hugepages are configured. Also
verifies enough free hugepages are available based on test
configuration. Will result in an exception if not enough hugepages
are found. This performs the check based on the guest memory configs
as well as the dpdk socket configs.
Adds some new methods to check for free hugepages based on all
hugepages or for socket free hugepages.
Adds new logging indicitaing needed and free hugepages as well as info
level event if hugepages are not configured at recommended 1GB size.
JIRA: VSPerf-255
Change-Id: I80d5605308861070c412568d8d40339f01b9718b
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
For MoonGen, the final results parameters: throughput_rx_percent,
throughput_tx_percent were incorrectly calculated when converting
MoonGen to VSPERF format. In particular, this would occur when more
than one data stream (single channel unidirectional traffic) was used in
the test. When calculating these percentages, only aggregate throughput
values equaling unidirectional traffic were used (for example, for 64
byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps)
JIRA: VSPERF-341
Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Initial creation of namespace fails because var/run/netns does not
exist.
JIRA: VSPERF-366
Change-Id: I02e5aef52e1675f303405b69c7461ca6482903af
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION
amount of RAM for hugepages.
JIRA: VSPERF-290
Change-Id: I092b3831254579eeebbe45e85884828f9d749895
Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
|
|
Xena exception when no stats collected on receive on one port
during bi-directional traffic. Modify aggregate_stats in the
XenaDriver.py, add judge whether the two port both has stats,
if one port has no stats, the result use the port's value which
has stats.
JIRA: VSPERF-327
Change-Id: I18c349d609a2834907f0383dbfbebd5cd281f541
Signed-off-by: liting <tli@redhat.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
|
|
|
|
Results from other traffic generators are reported as
pure numbers, i.e. 2477356.0000. These values are
consumed and processed by other scripts (e.g. CI or
OPNFV results visualization), so we should keep it
consistent among various traffic generators.
JIRA: VSPERF-342
Change-Id: I305421287eb632707038f2c8bc594fcb255ec939
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
MoonGen needs to take into account the VLAN tag 'enable'
control knob defined within the VSPERF traffic profile
and therefore only insert the VLAN tag when its 'True'.
JIRA: VSPERF-329
Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
DPDK 16.07-rc5 has renamed script tools/dpdk_nic_bind.py
to tools/dpdk-devbind.py. VSPERF was updated to use wildcard
in the script name, which is backward compatible.
Function get_version() from tools/systeminfo was updated
to correctly parse version information for DPDK v16. Version
name includes a minor version as defined inside rte_version.h.
It means, that for tag v16.07-rc5 VSPERF will show v16.07.0-rc5
in the report.
JIRA: VSPERF-333
Change-Id: I61a4ab2d90304fffdfc4d22a5cbf0cb7295402b3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Fix Xena2544.exe execution with mono where sometimes the
Xena process says complete, but the mono process doesn't exit.
Changes call of Xena2544.exe from communicate thread lock to a
wait try/catch block and checks the log periodically to see
if a deadlock has occured and if so, the mono pid is terminated
to prevent deadlock.
* Fix one small issue with typecasting to int, changed to float
JIRA: VSPERF-319
Change-Id: Ie7a86a2b9ff9cdfacba5a912ad17df6cc0581702
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Need to change naming to 'Moongen' for consistent naming
between conf files and class
JIRA: VSPERF-323
Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
|
|
Adds functionality for network namespaces and veth/peer ports
to connect the namespaces. The namespaces are tracked outside
of default Linux namespaces to prevent possible disruption of
work outside of VSPerf where a user may create a namespace and
the cleanup code deletes it. The cleanup code only removes
namespaces and veth ports created inside the testcase.
JIRA: VSPERF-310
Change-Id: If8881cafb119f38f052403a1de497e9660187d2e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Removal of redunant code in testcenter.py.
No logic Changes.
Cosmetic changes - removing redundant code of 150+ lines.
JIRA: VSPERF-308
Change-Id: I4766890cdc9f3d23103b2d2090285361ac4a5197
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
|
|
|
|
Modify the _create_throughput_result method typecasts int to
typecasts to float
JIRA: VSPERF-312
Change-Id: I45722251f3ca200373aa7b6958e62ea511c304f8
Signed-off-by: tli <tli@redhat.com>
|
|
|
|
Adds support for the MoonGen packet generator.
The following traffic types are included:
* RFC 2544 Throughput: Synchronous Interface
* RFC 2544 Back 2 Back: Synchronous Interface
* Continous Flow: Synchronous Interface
JIRA: VSPERF-168
Sample log of execution can be found as an
attachment within JIRA VSPERF-168
Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Fix baseconfig to work with new Xena2544.exe versions. Reporting
option for latency/jitter collection has changed.
Added note to trafficgen document reflecting recommended version
to use for Xena2544.exe.
JIRA: VSPERF-311
Change-Id: I1974ea3c9f9e4c0935fc8adead6ddd5a92a16a04
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add method set_test_options_back2back in code to modify duration,
iterations, and flowrate for back2back options in the json file.
JIRA: VSPERF-305
Change-Id: I1337318e7519fbd7b5a71bb26a1c62fcd8c2b66c
Signed-off-by: tli <tli@redhat.com>
|
|
Add Xena burst traffic functionality.
JIRA: VSPERF-263
Change-Id: I6336e5fcb33c0f66ee87f0f14f1b795937e3d00d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Adding changes for supporting continuous traffic for Spirent Testcenter
The changes are as follows:
1. From send_cont_traffic invoke function in testcenter-rfc2544-rest.py
2. In testcenter-rfc2544-rest.py check for the traffic_custom
3. If the traffic_custom is 'cont' do additional configuration on
traffic.
JIRA: VSPERF-146
Change-Id: Ic963f9f0c2bd013f6e676c9d18b151ae67ff77af
Signed-off-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
* Adds XenaDriver.py module to allow direct communication to
Xena chassis through socket API and collect stats.
* Adds implementation into xena.py for continuous traffic
flow.
JIRA: VSPERF-262
Change-Id: I6f975bc205e3c954215eb16466f11298e3fcdfaf
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix xena throughput stats for bi directional traffic by
taking the receive numbers from both ports instead of
a single port.
JIRA: VSPERF-303
Change-Id: I3898afe00f8c80f54e5b4c210831e1fc6cef3c20
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Fix run_task to correctly provide all output from command
sent. Commands that produced longer output would not
return all text.
JIRA: VSPERF-296
Change-Id: I7e501690ffdb7c01f90d524ffbabe65500f62304
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix xena_json module to correctly assign hwmodifier for
multistream. Append was incorrect application and
list needs to be assigned directly.
JIRA: VSPERF-293
Change-Id: I88d1930b88711af7c920b507a4db6c29cca83d8d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Support for reporting FPS and MBPS (TX and RX) is added.
JIRA: VSPERF-285
Change-Id: Ic4b6ca02368b1808f0f985e90099cdb0b41c2afa
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
|
|
|
|
Fixes bi-directional param and enforces string type in
testcase configuration. Modifies all instance where bi
directional value is used to string.
* Changes documentation to specify value type as needed
* Changes traffic defaults to use string for bidir value
* Fixes testcases configuration files to use bidir as str
* Change testcase conf documentation to note enforcement
of string type
* Sets bidir to title format to keep consitency in traffic
profile when passed to traffic generators
* Fix pvp/pvvp check for bidir value
* Raise exception if testcase configuration is not set
as str for bidir value
* Change Xena bi-dir check to string compare instead of
typecasting to boolean to compare.
JIRA: VSPERF-282
Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Wrong version of virtualenv was executed in Ubuntu
specific script. So python modules could not be installed
and vsperf was not working.
Hugepages mount point is newly created inside
sudo environment to avoid issues with permissions.
Change-Id: I4f5afc22bceb2eebbf018c42f42b7074a93e2293
JIRA: VSPERF-292
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|