summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2016-08-09Merge "pkt_gen: MoonGen should use class object for line rate calc"Maryam Tahhan1-1/+1
2016-08-09pkt_gen: MoonGen should use class object for line rate calcbmichalo1-1/+1
Instead of hard coding line speed numbers for rate calcuation, MoonGen should use its class object initialized at start time. JIRA: VSPERF-368 Change-Id: I68c688f8c244df16d98cfd15efabf491a317256b Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-09Merge "bugfix: Harmonize test/trial RFC2544 terminology"Maryam Tahhan10-70/+79
2016-08-09hugepage_detect: Change hugepage detection to check for free hugepagesChristian Trautman1-20/+55
Change hugepage detection to check if hugepages are configured. Also verifies enough free hugepages are available based on test configuration. Will result in an exception if not enough hugepages are found. This performs the check based on the guest memory configs as well as the dpdk socket configs. Adds some new methods to check for free hugepages based on all hugepages or for socket free hugepages. Adds new logging indicitaing needed and free hugepages as well as info level event if hugepages are not configured at recommended 1GB size. JIRA: VSPerf-255 Change-Id: I80d5605308861070c412568d8d40339f01b9718b Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-08-09Merge "namespace_bug: Initial creation of namespace fails"Maryam Tahhan1-2/+2
2016-08-08pkt_gen: MoonGen incorrectly calculates rx/tx % statisticsbmichalo1-7/+16
For MoonGen, the final results parameters: throughput_rx_percent, throughput_tx_percent were incorrectly calculated when converting MoonGen to VSPERF format. In particular, this would occur when more than one data stream (single channel unidirectional traffic) was used in the test. When calculating these percentages, only aggregate throughput values equaling unidirectional traffic were used (for example, for 64 byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps) JIRA: VSPERF-341 Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-08Merge "Xena: Modify aggregate_stats one port no stats when bi-direction"Maryam Tahhan1-2/+14
2016-08-06namespace_bug: Initial creation of namespace failsChristian Trautman1-2/+2
Initial creation of namespace fails because var/run/netns does not exist. JIRA: VSPERF-366 Change-Id: I02e5aef52e1675f303405b69c7461ca6482903af Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-08-05Merge "Hugepages: on the fly allocation."Maryam Tahhan1-1/+44
2016-08-05Merge "pkt_gen: MoonGen start rates not correct"Maryam Tahhan1-6/+21
2016-08-04bugfix: Harmonize test/trial RFC2544 terminologyMartin Klozik10-70/+79
VSPERF framework was updated to follow RFC2544 definition of 'test' and 'trial' terms. Test parameter 'rfc2544_trials' was replaced by new parameter 'rfc2544_tests'. Both code and documentation were updated to reflect these changes. JIRA: VSPERF-300 Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-08-04Hugepages: on the fly allocation.Mars Toktonaliev1-1/+44
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION amount of RAM for hugepages. JIRA: VSPERF-290 Change-Id: I092b3831254579eeebbe45e85884828f9d749895 Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
2016-08-03Xena: Modify aggregate_stats one port no stats when bi-directionliting1-2/+14
Xena exception when no stats collected on receive on one port during bi-directional traffic. Modify aggregate_stats in the XenaDriver.py, add judge whether the two port both has stats, if one port has no stats, the result use the port's value which has stats. JIRA: VSPERF-327 Change-Id: I18c349d609a2834907f0383dbfbebd5cd281f541 Signed-off-by: liting <tli@redhat.com>
2016-08-03pkt_gen: MoonGen start rates not correctbmichalo1-6/+21
The VSPERF traffic profile for starting rate is in a percentage of line rate. MoonGen programs its starting rate as Mpps. Therefore the traffic profile for VSPERF needs to be converted to a MoonGen format. There was a hardcoding of 14.88 that was used for the starting frame rate for all frame sizes. This needs to be corrected to take into account all frame sizes. JIRA: VSPERF-350 Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-03Merge "docs: Enhancement of IxNetwork configuration guide"Maryam Tahhan1-3/+1
2016-08-02Merge "pkt_gen: Remove commas from MoonGen results"Martin Klozik1-18/+18
2016-08-02Merge "xena_deadlock: Fix xena2544.exe deadlock"Maryam Tahhan1-41/+62
2016-08-01pkt_gen: Remove commas from MoonGen resultsbmichalo1-18/+18
Results from other traffic generators are reported as pure numbers, i.e. 2477356.0000. These values are consumed and processed by other scripts (e.g. CI or OPNFV results visualization), so we should keep it consistent among various traffic generators. JIRA: VSPERF-342 Change-Id: I305421287eb632707038f2c8bc594fcb255ec939 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-01Merge "pkt_gen: MoonGen incorrectly inserting VLAN tag"Martin Klozik1-2/+3
2016-07-27docs: Enhancement of IxNetwork configuration guideMartin Klozik1-3/+1
Configuration guide has been updated with description of IxNetwork specific configuration options. New section was added with description of test results sharing between IxNetwork and VSPERF. Additional changes: * wrong formatting inside installation.rst was fixed * description of IxNetwork configuration was updated inside ixnet.py JIRA: VSPERF-302 Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-07-27pkt_gen: MoonGen incorrectly inserting VLAN tagbmichalo1-2/+3
MoonGen needs to take into account the VLAN tag 'enable' control knob defined within the VSPERF traffic profile and therefore only insert the VLAN tag when its 'True'. JIRA: VSPERF-329 Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-26dpdk: Support of DPDK16.07-rc5 and newerMartin Klozik2-10/+33
DPDK 16.07-rc5 has renamed script tools/dpdk_nic_bind.py to tools/dpdk-devbind.py. VSPERF was updated to use wildcard in the script name, which is backward compatible. Function get_version() from tools/systeminfo was updated to correctly parse version information for DPDK v16. Version name includes a minor version as defined inside rte_version.h. It means, that for tag v16.07-rc5 VSPERF will show v16.07.0-rc5 in the report. JIRA: VSPERF-333 Change-Id: I61a4ab2d90304fffdfc4d22a5cbf0cb7295402b3 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-07-21xena_deadlock: Fix xena2544.exe deadlockChristian Trautman1-41/+62
Fix Xena2544.exe execution with mono where sometimes the Xena process says complete, but the mono process doesn't exit. Changes call of Xena2544.exe from communicate thread lock to a wait try/catch block and checks the log periodically to see if a deadlock has occured and if so, the mono pid is terminated to prevent deadlock. * Fix one small issue with typecasting to int, changed to float JIRA: VSPERF-319 Change-Id: Ie7a86a2b9ff9cdfacba5a912ad17df6cc0581702 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-20pkt_gen: Moongen class name not consistent with name in conf filesbmichalo1-24/+24
Need to change naming to 'Moongen' for consistent naming between conf files and class JIRA: VSPERF-323 Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-08Merge "Spirent-TestCenter: Code Cleanup."sridharkn1-276/+136
2016-07-08Merge "Namespace_veth: Add funtionality for network namespace, veth ports"Christian Trautman2-0/+296
2016-07-07Namespace_veth: Add funtionality for network namespace, veth portsChristian Trautman2-0/+296
Adds functionality for network namespaces and veth/peer ports to connect the namespaces. The namespaces are tracked outside of default Linux namespaces to prevent possible disruption of work outside of VSPerf where a user may create a namespace and the cleanup code deletes it. The cleanup code only removes namespaces and veth ports created inside the testcase. JIRA: VSPERF-310 Change-Id: If8881cafb119f38f052403a1de497e9660187d2e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-05Spirent-TestCenter: Code Cleanup.sridharkn1-276/+136
Removal of redunant code in testcenter.py. No logic Changes. Cosmetic changes - removing redundant code of 150+ lines. JIRA: VSPERF-308 Change-Id: I4766890cdc9f3d23103b2d2090285361ac4a5197 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-07-01Merge "Spirent Support for Continuous Traffic"Christian Trautman2-2/+129
2016-07-01Merge "pkt_gen: Adding MoonGen traffic generator"Christian Trautman2-0/+766
2016-06-30Xena: Modify the throughput result typecasts int issuetli1-4/+4
Modify the _create_throughput_result method typecasts int to typecasts to float JIRA: VSPERF-312 Change-Id: I45722251f3ca200373aa7b6958e62ea511c304f8 Signed-off-by: tli <tli@redhat.com>
2016-06-30Merge "xena_bug: Resolve baseconfig reporting option to work with new versions"Christian Trautman1-1/+1
2016-06-30pkt_gen: Adding MoonGen traffic generatorbmichalo2-0/+766
Adds support for the MoonGen packet generator. The following traffic types are included: * RFC 2544 Throughput: Synchronous Interface * RFC 2544 Back 2 Back: Synchronous Interface * Continous Flow: Synchronous Interface JIRA: VSPERF-168 Sample log of execution can be found as an attachment within JIRA VSPERF-168 Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-06-29Merge "xena_burst: Add Xena Burst traffic"Christian Trautman1-15/+11
2016-06-29xena_bug: Resolve baseconfig reporting option to work with new versionsChristian Trautman1-1/+1
Fix baseconfig to work with new Xena2544.exe versions. Reporting option for latency/jitter collection has changed. Added note to trafficgen document reflecting recommended version to use for Xena2544.exe. JIRA: VSPERF-311 Change-Id: I1974ea3c9f9e4c0935fc8adead6ddd5a92a16a04 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-06-28Xena: Modify xena_json for back2back optionstli2-14/+50
Add method set_test_options_back2back in code to modify duration, iterations, and flowrate for back2back options in the json file. JIRA: VSPERF-305 Change-Id: I1337318e7519fbd7b5a71bb26a1c62fcd8c2b66c Signed-off-by: tli <tli@redhat.com>
2016-06-26xena_burst: Add Xena Burst trafficChristian Trautman1-15/+11
Add Xena burst traffic functionality. JIRA: VSPERF-263 Change-Id: I6336e5fcb33c0f66ee87f0f14f1b795937e3d00d Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-06-22Merge "xena_bug: Fix throughput stats with bi-directional traffic"Maryam Tahhan1-3/+5
2016-06-08Spirent Support for Continuous TrafficSridhar Rao2-2/+129
Adding changes for supporting continuous traffic for Spirent Testcenter The changes are as follows: 1. From send_cont_traffic invoke function in testcenter-rfc2544-rest.py 2. In testcenter-rfc2544-rest.py check for the traffic_custom 3. If the traffic_custom is 'cont' do additional configuration on traffic. JIRA: VSPERF-146 Change-Id: Ic963f9f0c2bd013f6e676c9d18b151ae67ff77af Signed-off-by: Sridhar Rao <sridhar.rao@spirent.com>
2016-06-07xena_cont: Add Xena continuous traffic functionalityChristian Trautman2-34/+1425
* Adds XenaDriver.py module to allow direct communication to Xena chassis through socket API and collect stats. * Adds implementation into xena.py for continuous traffic flow. JIRA: VSPERF-262 Change-Id: I6f975bc205e3c954215eb16466f11298e3fcdfaf Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-27xena_bug: Fix throughput stats with bi-directional trafficChristian Trautman1-3/+5
Fix xena throughput stats for bi directional traffic by taking the receive numbers from both ports instead of a single port. JIRA: VSPERF-303 Change-Id: I3898afe00f8c80f54e5b4c210831e1fc6cef3c20 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-23Merge "xena_multistream_fix: Fix multistream json config"Maryam Tahhan1-1/+1
2016-05-12run_task_fix: Fix run_task to provide all output from commandChristian Trautman1-7/+14
Fix run_task to correctly provide all output from command sent. Commands that produced longer output would not return all text. JIRA: VSPERF-296 Change-Id: I7e501690ffdb7c01f90d524ffbabe65500f62304 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-12xena_multistream_fix: Fix multistream json configChristian Trautman1-1/+1
Fix xena_json module to correctly assign hwmodifier for multistream. Append was incorrect application and list needs to be assigned directly. JIRA: VSPERF-293 Change-Id: I88d1930b88711af7c920b507a4db6c29cca83d8d Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-04pkt_gen: Reporting FPS and MBPS from Spirent Testcentersridharkn1-8/+28
Support for reporting FPS and MBPS (TX and RX) is added. JIRA: VSPERF-285 Change-Id: Ic4b6ca02368b1808f0f985e90099cdb0b41c2afa Signed-off-by: sridharkn <sridhar.rao@spirent.com>
2016-05-04Merge "bugfix: Fix creation of vsperfenv in Ubuntu"Maryam Tahhan1-1/+2
2016-05-04Merge "bidirectional value: Fix inconsistency for bidir param"Maryam Tahhan2-2/+2
2016-05-04bidirectional value: Fix inconsistency for bidir paramChristian Trautman2-2/+2
Fixes bi-directional param and enforces string type in testcase configuration. Modifies all instance where bi directional value is used to string. * Changes documentation to specify value type as needed * Changes traffic defaults to use string for bidir value * Fixes testcases configuration files to use bidir as str * Change testcase conf documentation to note enforcement of string type * Sets bidir to title format to keep consitency in traffic profile when passed to traffic generators * Fix pvp/pvvp check for bidir value * Raise exception if testcase configuration is not set as str for bidir value * Change Xena bi-dir check to string compare instead of typecasting to boolean to compare. JIRA: VSPERF-282 Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-04bugfix: Fix creation of vsperfenv in UbuntuMartin Klozik1-1/+2
Wrong version of virtualenv was executed in Ubuntu specific script. So python modules could not be installed and vsperf was not working. Hugepages mount point is newly created inside sudo environment to avoid issues with permissions. Change-Id: I4f5afc22bceb2eebbf018c42f42b7074a93e2293 JIRA: VSPERF-292 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-05-04bugfix: Graceful shutdown of VM - improvementMartin Klozik2-8/+63
Cleanup phase of PVVP scenario sometimes causes server reboot. Following updates were made to prevent reboots: * better generic process termination procedure * ovsdb is terminated after vswitchd termination * vswitchd is terminated directly instead of parent sudo process * already running VNFs are terminated in case of failure during VNF start() Change-Id: Ic09d60d7bfdea01c84a2685ede3d0316f0d09be7 JIRA: VSPERF-271 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>