summaryrefslogtreecommitdiffstats
path: root/tools/pkt_gen/trafficgen/trafficgen.py
AgeCommit message (Collapse)AuthorFilesLines
2018-04-16trex: Add support for burst traffic typeMartin Klozik1-3/+2
Support for burst traffic type was added into T-Rex. This traffic type is useful for tests, where a limited number of frames should be sent through DUT. JIRA: VSPERF-562 Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richardx.elias@intel.com> (cherry picked from commit e9ff0fdf355d26d0c171c6c1137c4beb12561233)
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-6/+8
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-08-04bugfix: Harmonize test/trial RFC2544 terminologyMartin Klozik1-6/+6
VSPERF framework was updated to follow RFC2544 definition of 'test' and 'trial' terms. Test parameter 'rfc2544_trials' was replaced by new parameter 'rfc2544_tests'. Both code and documentation were updated to reflect these changes. JIRA: VSPERF-300 Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-03-11bugfix: Cleanup of traffic gen api and default traffic valuesMartin Klozik1-16/+7
Both documentation and traffic generator API are updated to match current code logic. Additional default values are added into TRAFFIC_DEFAULTS dictionary. Constructor of TestCase class uses default values from TRAFFIC_DEFAULTS instead of magic numbers. Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6 JIRA: VSPERF-253 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2015-12-02pkt_gen: add duration to all send functionsMaryam Tahhan1-10/+9
Allow a configurable duration for all send functions. JIRA: VSPERF-125 Change-Id: I7c6f5d136a7d7100e3990f7fdc00121b07081a80 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2015-10-23Simple performance Test for the PVP and PVVPMartin Klozik1-8/+5
Two sample contionous stream testcaes were introduced for PVP and PVVP scenarios. Required frame rate percentage can be specified either by tetcase configuration option "iLoad" or by command line option "iload". Command line option take precendece to testcase option. By default 100% linerate is used if not specified otherwise. Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b JIRA: VSPERF-95 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-08-13Add new testcase for LTD.Scalability.RFC2544.0PacketLossMartin Klozik1-8/+6
This test adds a multistream config item, taking the required number of flows to setup in the traffic, to the existing testcase and then running the standard 2544 Throughput test. The config is plumbed through from the 01_testcase.conf via ITraffic to the IxNet. 01_testcase.conf contains new parameter MultiStream for 2544 Throughput test. JIRA: VSPERF-19 Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony1-0/+221
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>