Age | Commit message (Collapse) | Author | Files | Lines |
|
Support for burst traffic type was added into T-Rex. This
traffic type is useful for tests, where a limited number
of frames should be sent through DUT.
JIRA: VSPERF-562
Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Richard Elias <richardx.elias@intel.com>
(cherry picked from commit e9ff0fdf355d26d0c171c6c1137c4beb12561233)
|
|
Updated master Python scripts to conform to the newer pylint
1.8.2 standard.
JIRA: VSPERF-563
Change-Id: I19305a008a2e22c2f4841aa83fed85fbdc2d549c
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
This patch fixes a bug caused due to wrong parameter ordering.
stc_common_settings should come after rfc2544_common_settings.
It also gets rid of 'Import' error for module 'conf'
JIRA: VSPERF-491
Change-Id: I356294b4efdf9ebd0cea4492d3ed1cb8e04ec9b1
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
All python files must reach pylint score 10/10. This will be
regularly verified by Jenkins jobs to keep constant code quality.
VSPERF specific pylintrc file was updated according to the vsperf
coding standards. Distro version included in reports will be
slightly different, due to migration to new python package distro.
Previously used platform.distro() will be deprecated since python 3.7.
JIRA: VSPERF-487
Change-Id: I934120208b9624787a3567ccaa49e14d77d7a5bf
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
If the downloading of results-database file fails, the CSV file and
corresponding results are not generated - eventhough the test was
successful.
This small patch handles such cases.
Updated the logging to be more explicit.
JIRA: VSPERF-435
Change-Id: I14bf519fbca2ea362777e29920bc1759494965e0
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
JIRA: VSPERF-392
Change-Id: I44866b7d3298617003b87b015eb08bf32c4014f7
Signed-off-by: Otto Sabart <osabart@redhat.com>
|
|
The changes/additions, apart from spirent testcenter-specific, also
includes
to some files in conf (01_testcase and 03_traffic) and core (result-
constants, traffic_controller and component_factory) folders.
Currently, only RFC2889 Forwarding testcase is supported.
Incorporated following review suggestions:
1. Log level fixes
2. Removing unused function in results_constants.py
3. Added documentation to docs/configguide/trafficgen.rst. Userguide
will be updated once other RFC2889 tests are implemented.
4. string matching in component_factory.
5. Remove Trailing Whitespaces
JIRA: VSPERF-286
Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Added changes to make use of the tests parameter.
The change is minor.
Prior to this the value was taken from configuration file.
With this change, the tests value is used as passed.
JIRA: VSPERF-367
Change-Id: I9d1553d3b53dd19a79428ddaaacadb55fc27324f
Signed-off-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Removal of redunant code in testcenter.py.
No logic Changes.
Cosmetic changes - removing redundant code of 150+ lines.
JIRA: VSPERF-308
Change-Id: I4766890cdc9f3d23103b2d2090285361ac4a5197
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Adding changes for supporting continuous traffic for Spirent Testcenter
The changes are as follows:
1. From send_cont_traffic invoke function in testcenter-rfc2544-rest.py
2. In testcenter-rfc2544-rest.py check for the traffic_custom
3. If the traffic_custom is 'cont' do additional configuration on
traffic.
JIRA: VSPERF-146
Change-Id: Ic963f9f0c2bd013f6e676c9d18b151ae67ff77af
Signed-off-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Support for reporting FPS and MBPS (TX and RX) is added.
JIRA: VSPERF-285
Change-Id: Ic4b6ca02368b1808f0f985e90099cdb0b41c2afa
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
The import of stcrestclient in moved down to avoid execution errors.
Change-Id: Ib9b64f62400c20a031f0ffcd3410582741cf1644
JIRA: VSPERF-237
|
|
Stcrestclient package based script is added. Support for RFC22544
backtoback, latency, frameloss are also added, along with the throughput.
Comments Addressed:
1. Parameter name consistency. Ex: use duration (refer dummy.py).
2. Moved 'only the necessary contents of README to
configguide/trafficgen.rst.
3. Removed README file
4. Commit message format (pkt_gen: and linewrap)
5. Merged 4 scripts (throughput/backtoback/latency/frameloss)
that were rest-based into one single script.
Name: testcenter-rfc2544-test.py
6. Changed year to 2016
7. Moved imports to the top (testcenter-rfc2544-rest.py)
8. Changed prints to Log (testcenter-rfc2544-rest.py)
9. Reporting the frame loss percentage.
10. Calls to frameloss and latency are not added as the 'caller'
class TrafficControllerRFC2544 is only calling backtoback and
throughput.
11. Changed Exception, e to Exception as e for python 3
compatibility
12. Remaining prints to debug and logger.error for errors.
13. Moved Session creation under try block.
14. Removed deadcode
15. Fixed missing docstring
16. Generic to specific Exception.
17. if-if to if-elif
18. Debug level logging only under verbose flag.
19. Fixed Arguments mismatch.
20. Ordering of the imports
Note: The testcenter-rfc2544-rest.py is spawned as a separate process,
and need not be wrapped in a class.
JIRA: VSPERF-237
Change-Id: I05d2b24fca1da4ba67bc4d79206c5d755ebf8f20
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
VSPERF will explicitly expand any '~' to the absolute path to the user's
home directory before call of subsystem.Popen method. Only calls,
which process configuration values are modified.
Change-Id: Ibd9399ae84bf4698c86bf8eff97ca6ce785fb3fb
JIRA: VSPERF-45
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Change throughput_tx_* references to tx_rate_* so the results won't be
confusing as part of the opnfv test dashboard when they become
publicly available.
Change-Id: Ie8cfae99a75497f15eb09d097c72c8a35df3b5f9
JIRA: VSPERF-135
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Allow a configurable duration for all send functions.
JIRA: VSPERF-125
Change-Id: I7c6f5d136a7d7100e3990f7fdc00121b07081a80
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
|
|
Update testcenter implementation to move settings to
generic settings file and change windows line endings.
JIRA: VSPERF-126
Change-Id: I156005f261bc0df6c3d8009db72ba2d5991c6166
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4
|