Age | Commit message (Collapse) | Author | Files | Lines |
|
The multistream configuration is not passed to the remote host where the traffic generator (MoonGen) runs.
Change-Id: I3e9862553b5b064272f3bfffb788c06ebd3740ca
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Need to make VSPERF's MoonGen codebase in parity with master emmerich
MoonGen branch.
JIRA: VSPERF-400
Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
MoonGen code optimizations and general clean up. No
functionality changes.
JIRA: VSPERF-351
Change-Id: Ida16f16eb218eb6f0a1c90594c38511bfbb2cf97
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Misplaced parenthesis regarding THROUGHPUT_RX_MBPS
JIRA: VSPERF-381
Change-Id: Ie33cf6ca88164f0686a819715b5f9f7409072063
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Instead of hard coding line speed numbers for rate calcuation,
MoonGen should use its class object initialized at start time.
JIRA: VSPERF-368
Change-Id: I68c688f8c244df16d98cfd15efabf491a317256b
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
For MoonGen, the final results parameters: throughput_rx_percent,
throughput_tx_percent were incorrectly calculated when converting
MoonGen to VSPERF format. In particular, this would occur when more
than one data stream (single channel unidirectional traffic) was used in
the test. When calculating these percentages, only aggregate throughput
values equaling unidirectional traffic were used (for example, for 64
byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps)
JIRA: VSPERF-341
Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Results from other traffic generators are reported as
pure numbers, i.e. 2477356.0000. These values are
consumed and processed by other scripts (e.g. CI or
OPNFV results visualization), so we should keep it
consistent among various traffic generators.
JIRA: VSPERF-342
Change-Id: I305421287eb632707038f2c8bc594fcb255ec939
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
MoonGen needs to take into account the VLAN tag 'enable'
control knob defined within the VSPERF traffic profile
and therefore only insert the VLAN tag when its 'True'.
JIRA: VSPERF-329
Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Need to change naming to 'Moongen' for consistent naming
between conf files and class
JIRA: VSPERF-323
Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Adds support for the MoonGen packet generator.
The following traffic types are included:
* RFC 2544 Throughput: Synchronous Interface
* RFC 2544 Back 2 Back: Synchronous Interface
* Continous Flow: Synchronous Interface
JIRA: VSPERF-168
Sample log of execution can be found as an
attachment within JIRA VSPERF-168
Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486
Signed-off-by: bmichalo <bmichalo@redhat.com>
|