aboutsummaryrefslogtreecommitdiffstats
path: root/tools/pkt_gen/moongen/moongen.py
AgeCommit message (Collapse)AuthorFilesLines
2017-04-13Fix for multi-stream configurationMarco Varlese1-0/+3
The multistream configuration is not passed to the remote host where the traffic generator (MoonGen) runs. Change-Id: I3e9862553b5b064272f3bfffb788c06ebd3740ca Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-16/+2
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-30pkt_gen: MoonGen updated to keep parity with masterbmichalo1-2/+2
Need to make VSPERF's MoonGen codebase in parity with master emmerich MoonGen branch. JIRA: VSPERF-400 Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-09-07pkt_gen: MoonGen code clean upbmichalo1-64/+54
MoonGen code optimizations and general clean up. No functionality changes. JIRA: VSPERF-351 Change-Id: Ida16f16eb218eb6f0a1c90594c38511bfbb2cf97 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-26pkt_gen: MoonGen Incorrect RX_MBPS Calculationbmichalo1-1/+1
Misplaced parenthesis regarding THROUGHPUT_RX_MBPS JIRA: VSPERF-381 Change-Id: Ie33cf6ca88164f0686a819715b5f9f7409072063 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-09Merge "pkt_gen: MoonGen should use class object for line rate calc"Maryam Tahhan1-1/+1
2016-08-09pkt_gen: MoonGen should use class object for line rate calcbmichalo1-1/+1
Instead of hard coding line speed numbers for rate calcuation, MoonGen should use its class object initialized at start time. JIRA: VSPERF-368 Change-Id: I68c688f8c244df16d98cfd15efabf491a317256b Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-09Merge "bugfix: Harmonize test/trial RFC2544 terminology"Maryam Tahhan1-25/+25
2016-08-08pkt_gen: MoonGen incorrectly calculates rx/tx % statisticsbmichalo1-7/+16
For MoonGen, the final results parameters: throughput_rx_percent, throughput_tx_percent were incorrectly calculated when converting MoonGen to VSPERF format. In particular, this would occur when more than one data stream (single channel unidirectional traffic) was used in the test. When calculating these percentages, only aggregate throughput values equaling unidirectional traffic were used (for example, for 64 byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps) JIRA: VSPERF-341 Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-04bugfix: Harmonize test/trial RFC2544 terminologyMartin Klozik1-25/+25
VSPERF framework was updated to follow RFC2544 definition of 'test' and 'trial' terms. Test parameter 'rfc2544_trials' was replaced by new parameter 'rfc2544_tests'. Both code and documentation were updated to reflect these changes. JIRA: VSPERF-300 Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-08-03pkt_gen: MoonGen start rates not correctbmichalo1-6/+21
The VSPERF traffic profile for starting rate is in a percentage of line rate. MoonGen programs its starting rate as Mpps. Therefore the traffic profile for VSPERF needs to be converted to a MoonGen format. There was a hardcoding of 14.88 that was used for the starting frame rate for all frame sizes. This needs to be corrected to take into account all frame sizes. JIRA: VSPERF-350 Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-08-01pkt_gen: Remove commas from MoonGen resultsbmichalo1-18/+18
Results from other traffic generators are reported as pure numbers, i.e. 2477356.0000. These values are consumed and processed by other scripts (e.g. CI or OPNFV results visualization), so we should keep it consistent among various traffic generators. JIRA: VSPERF-342 Change-Id: I305421287eb632707038f2c8bc594fcb255ec939 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-27pkt_gen: MoonGen incorrectly inserting VLAN tagbmichalo1-2/+3
MoonGen needs to take into account the VLAN tag 'enable' control knob defined within the VSPERF traffic profile and therefore only insert the VLAN tag when its 'True'. JIRA: VSPERF-329 Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-20pkt_gen: Moongen class name not consistent with name in conf filesbmichalo1-24/+24
Need to change naming to 'Moongen' for consistent naming between conf files and class JIRA: VSPERF-323 Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-06-30pkt_gen: Adding MoonGen traffic generatorbmichalo1-0/+753
Adds support for the MoonGen packet generator. The following traffic types are included: * RFC 2544 Throughput: Synchronous Interface * RFC 2544 Back 2 Back: Synchronous Interface * Continous Flow: Synchronous Interface JIRA: VSPERF-168 Sample log of execution can be found as an attachment within JIRA VSPERF-168 Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486 Signed-off-by: bmichalo <bmichalo@redhat.com>