Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove TODO sections from the Release B report.
Change-Id: I4520c23ad9cbb980c9f1c1ee14cc7e91060933a4
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Migrate the installation guide for vsperf to a configguide directory,
update the links to the installation guide. Re-add top level index.rst
and remove the all directory. Update release documentation with vsperf
Rel B support.
Change-Id: Ib643b9d3581d8109b85c377027c8cc6be4b797fc
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Routing Table Figure has an odd description
for the table#1 description.
Connectivity to the DUT is assumed, could provide
example directions. Suggest a new section.
JIRA: VSPERF-178
JIRA: VSPERF-179
Change-Id: I38e48034a9029d4a8969affdddef5b281dc8eba3
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
(cherry picked from commit 11ea896d3dee85a79316c57838adef8807784359)
|
|
Since 'make' builds all three OVS variants,
WITH_LINUX and VHOST_USER are not used anymore on cli.
The fix removes them from quickstart.rst
JIRA: VSPERF-177
Change-Id: I7efe49f638f1234da0d84c5eb62624f543134efc
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
>
(cherry picked from commit e840131eef8e493a1b0a4bd4ed2885c958b481f9)
|
|
JIRA: VSPERF-60
Change-Id: I2c04faa13a2182e3e28619d23ec68ac52c7a7be9
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
(cherry picked from commit b6b3b362d6c5a46d7f4eddd7c38062c0e6b78a0a)
|
|
Fix installation and Traffic gen guide links in
http://artifacts.opnfv.org/vswitchperf/docs/userguides/quickstart.html
to
http://artifacts.opnfv.org/vswitchperf/docs/userguides/installation.html
and
http://artifacts.opnfv.org/vswitchperf/docs/userguides/trafficgen.html.
Also added where vloop_vnf can be downloaded from.
JIRA: VSPERF-186
Change-Id: I585367b1c717fdbb0b56b7f0312fe9c70f51594f
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
(cherry picked from commit a844a969d48f2294e639350f5eca82bf8ef81623)
|
|
Installation guide should be OS agnostic.
Change-Id: Idba63925a27fd204c6542ca886381a56c0415dab
JIRA: VSPERF-150
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
(cherry picked from commit 2a2baf3f5f348539b50194a456b49b4ccb32b775)
|
|
JIRA: VSPERF-160
Change-Id: I5722fd8340e009cb1885981e6e40468df4d9216c
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Review and update release documentation for Release B.
JIRA: VSPERF-160
Change-Id: I43c85639ed010f950dc3c85eecfe2ff47b65214d
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Review and update design documentation for Release B.
JIRA: VSPERF-160
Change-Id: I2c2167b5ac9161e30aacd277060da22a559dd0c2
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Review and update userguides for Release B.
JIRA: VSPERF-160
Change-Id: I54c4dd37fa5951cab9d0e17bb2f3a4d273741cb0
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Move the traffic gen instructions to a separate user guide and add
information on usage of the Dummy traffic generator. Update docs
to fix PDF build failure and do general clean-up. Removed the numbering
from the LTD and added the numbered directive to automate numbering for
sections and headers. Add comment anchors that reflect the section
numbers.
Change-Id: I984ca38456a891c439697ebc1da041bc1d828a15
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Update the default duration of a back to back test to be 2 seconds which
is the minimum recommended by RFC2544, and update the Trials to be 50,
which is also the default value specified by the RFC. This patch also
fixes the tcl script to allow for the minimum framesize to be sent from
the traffic gen.
JIRA:
Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
|
|
- Physical port → VNF → vSwitch → VNF → physical port
updated topology with pNIC-VF
this provides us ability to fill up the box with multiple VNFs
JIRA: VSPERF-123
Change-Id: Iea991b2cd2973c07ecbc300bb6d413a182cae992
Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
|
|
Change-Id: I5009a996b2e581638f159ed37a1c56ac53c0c71f
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
All the test projects generate results in different format.
The goal of a testing dashboard is to provide a consistent
view of the different tests from the different projects.
We need to enable the data collection for VSPERF, in other words
VSPERF pushes data using a REST API.
The feature is enabled by --opnfvpod parameter on vsperf command line.
The value of the parameter sets POD name.
Example:
--opnfvpod <pod_name> or --opnfvpod=<pod_name>
You need to specify installer name. It can be set in conf-file
default value:
OPNFV_INSTALLER = "Fuel"
JIRA: VSPERF-112
Change-Id: I37255414eebcc2ff0c12109c508dcd984663a830
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
For PVP and PVVP deployments, traffic inside virtual machines must be
forwarded between its interfaces. There are several forwarding options
supported by VSPERF, including DPDK testpmd, Huawei l2fwd kernel module
and linux bridge. Another option is, that VM image has built in forwarding
functionality and vsperf doesn't configure it itself.
User can select VM loopback application by configuration option
GUEST_LOOPBACK (per VM) or by SCALAR cli option guest_loopback (global
settings).
Selected guest loopback application(s) will be written into test results
CSV file and test report MD file.
Default wildcarded guest login prompt was added. Guest startup guarding
timer can be configured. Path to OVS kernel module has been fixed.
Change-Id: If738da1ea09112f9cf2267afcbc99a6797f3a03a
JIRA: VSPERF-130
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Update installation guide and gsg to include latest updates to vsperf
build and installation.
JIRA: VSPERF-127
Change-Id: I773ea240eb90e191f4f53ed977651056817413f1
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
JIRA: RELENG-16
Change-Id: I0aaac15c1d1a1031cbc113db594a342c60b7eb1d
Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
|
|
Reorganize docs into the appropriate folders for the new sphinx build.
JIRA: VSPERF-80
Change-Id: I9dcd74e092ce52546a0986b92a1ebb2b5b7419bf
Signed-off-by: Ramprasad Velavarthipati <ram.v@freescale.com>
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Trinath Somanchi <trinath.somanchi@gmail.com>
|
|
Automatic selection of OVS and DPDK directories must be performed
before initialization of modules is called. Otherwise modules will
use wrong values with unpredictable results.
Default directory values have been changed to point to sources build
by make.
Clean&sweep of directory usage was performed.
Configuration file for pylint has been renamed to follow pylint
naming convention.
Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb
JIRA: VSPERF-121
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4
|
|
Fixup the location of all rst documentation and any errors in the ltd.
JIRA:VSPERF-60
Change-Id: I1472d540b1b4eca4ab038d079bfb0ef2f0c5ebcd
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Installation scripts for Centos7 have been updated with new packages.
Script will install also python3 packages and create python virtual
environment. As a last step DPDK, OVS and QEMU will be compiled. So
after script execution VSPERF should be ready for use.
It is recommended to execute installation script from user account
with password less sudo access. Otherwise python environment
must be copied over from root home directory.
After VSPERF generic Makefile will be created by VSPERF-114, it can
be enhanced to call build script too.
Change-Id: I6ff5d2660af29cf8be134a4cae3b1d7b559892fa
JIRA: VSPERF-93
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Abdul Halim <abdul.halim@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Initial pylint config file has been created to follow current
code structure and design. A few issues have been fixed, so currently
56 of 67 files have rating 10/10. There are still issues to be fixed,
mainly TODOs/FIXMEs and missing impelentation of abstract class members.
Change-Id: Icf5b12c2150258f8ac657f8d50b47a697d1660a0
JIRA: VSPERF-91
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
The RFC 2889 Forwarding Rate test requires a Deployment Scenario
Section - was missing.
JIRA: VSPERF-102
Change-Id: Iaf661a6bbb9ad52f23147f9444f23d96a82ceb2d
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
LTD.Scalability.RFC2544.0PacketLoss needs to add the caution that
all flows must be learned before running Throughput testing,
and no flows can be allowed to time-out during the test.
JIRA: VSPERF-108
Change-Id: I95ae20a978b7af660b358450e67ce60939b0b7c1
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
Among the Updates needed are:
- Several New tests created since July, add to Matrix section.
- Re-named tests: fix in Matrix section.
- Link to Summaries on Wiki.
- Link to Test Setup Figures on Wiki.
- Add some general points on New Test Equipment Challenges/Metrics.
- Mention future test specs, and IFA003 as one source.
JIRA: VSPERF-120
Change-Id: I981b0b6301a208d20220f67784b4591aa3f51338
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
In the LTD, some of the tests with "Throughput" in the title are not actually
testing throughput in the data path.
Since the test names are used by TOIT/VSPERF to group similar tests for batch
execution, it's important that the names accurately represent the test methods
and metrics measured.
JIRA: VSPERF-98
Change-Id: I620ddc0779232f2dd325379005faba8692fea18c
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
A few of the tests should call out a prerequisite.
LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability
and
LTD.Scalability.RFC2544.0PacketLoss
are examples.
JIRA: VSPERF-107
Change-Id: I1ca653ac765f9494b48759764103dfc9d42a42f1
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
LTD.Throughput.RFC2544.Profile refers to the metric "maximum forwarding rate"
but implies that this is the zero% loss rate, which would be the Throughput
level (MFR is usually higher than Throughput, because MFR allows losses).
It may be that MFR and Throughput are just interchanged in the last two
paragraphs of the description.
JIRA: VSPERF-110
Change-Id: I4f36fd4ce66f2f4ebee4f60a11ad03adfb2b3b7c
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
The following text in the Description needs to be formatted as a list in .RST:
Furthermore: - the ratio of reads to writes should be recorded.
JIRA: VSPERF-109
Change-Id: I3b6c819d1ac07cc466c747d3552cbcc4de5f34bf
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
In the RFC 2889 Broadcast rate testing, four test ports are required.
One of the ports is connected to the test device, so it can send
broadcast frames and listen for miss-routed frames.
JIRA: VSPERF-103
Change-Id: I5ee3d20c71d7debf6c7b09fc094f72b2d4c10684
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
|
|
Support for PVP and PVVP scenerios using Vanilla OVS was added.
VMs are configured to forward traffic between virtual interfaces
by standard linux capabilities. Traffic generator script was updated
to accept MAC and IP address configuration to allow VM forwarding
configuration.
VSPERF-66, VSPERF-70
Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Text & sequence diagrams as both source and png.
JIRA: VSPERF-106
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Change-Id: I33f57fba85710ab4cfc72d0a5d06db6f653545d6
|
|
The RFC 2889 Address Learning and Cache Capacity tests require
a listening port to check for flooded frames.
JIRA: VSPERF-74
Change-Id: I7b4d2461e819d01d642c9c4d95b938dfbe056f2c
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Generic PVVP deployment support has been added. Two
new testcase scenarios for throughput and back2back
tests with PVVP deployment were added. Original
implementation of PVP has been refactored
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/04_vnf.conf
modified: core/__init__.py
modified: core/component_factory.py
modified: core/loader/loader_servant.py
modified: core/vnf_controller.py
deleted: core/vnf_controller_p2p.py
deleted: core/vnf_controller_pvp.py
modified: core/vswitch_controller_p2p.py
modified: core/vswitch_controller_pvp.py
new file: core/vswitch_controller_pvvp.py
modified: docs/to-be-reorganized/NEWS.rst
modified: docs/to-be-reorganized/quickstart.rst
modified: src/dpdk/dpdk.py
modified: src/ovs/ofctl.py
modified: testcases/testcase.py
modified: tools/tasks.py
new file: vnfs/qemu/qemu.py
new file: vnfs/qemu/qemu_dpdk.py
modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py
modified: vnfs/qemu/qemu_dpdk_vhost_user.py
modified: vnfs/vnf/vnf.py
modified: vswitches/ovs_dpdk_vhost.py
Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab
JIRA: VSPERF-68, VSPERF-69
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
The Current list of fixed frame sizes need to be augmented with
IMIX Traffic Profiles in the test framework.
JIRA: VSPERF-100
Change-Id: I97425c09c1d692bae56f2518d479b83a282eb7d1
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
The RFC 2889 tests require Full Mesh on multiple ports.
Modify the bunny-ears fig to show this (and address -99 in the process)
JIRA: VSPERF-99
JIRA: VSPERF-101
Change-Id: Id67cb5ef6748c83858a90033534f960874614c06
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
New sysmetrics implementation is based on pidstat command line tool
from sysstat package. Old non-functional implementation was removed.
Reporting was refactored to generate report after each TC from values
already available in memory.
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/05_collector.conf
deleted: core/collector_controller.py
modified: core/component_factory.py
modified: docs/NEWS.rst
modified: packages.txt
modified: requirements.txt
modified: testcases/testcase.py
modified: tools/collectors/collector/collector.py
modified: tools/collectors/sysmetrics/__init__.py
deleted: tools/collectors/sysmetrics/linuxmetrics.py
new file: tools/collectors/sysmetrics/pidstat.py
modified: tools/report/report.jinja
modified: tools/report/report.py
modified: tools/systeminfo.py
modified: vsperf
JIRA: VSPERF-67
Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
TODO: Reorganize documentation into properly named subfolders
TODO: Add logos to documentation (see index.rst for example)
Note you can see the results of this change via a link in the gerrit
comments below
NOTE: The merge job for your project has not been enabled, this code
will not go to the artifacts page upon a merge. you can merge it and
work on it in your own time, please contact me to enable the merge
(the merge job will make this documentation avaliable to the public on
artifacts.opnfv.org)
JIRA:RELENG-15
Change-Id: I3f3d8c9d7fceae90e0ed824b66bdaf7a8ea66328
Signed-off-by: Aric Gardner <agardner@linuxfoundation.org>
|
|
Expand description of Packet Delay Variation to capture
the additional details which will be important to measurement
design. Measurmeent devices may be implementing the RFC 5481
PDV metric for the firt time, so som general details will
be useful to include in the LTD. Addresses MT's comments.
JIRA: VSPERF-73
Change-Id: I60524969f72bb00519e8070ae51e219d857c554e
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Load eventfd only when vhost-cuse is specified as
the guest access method.
This commit also includes quickstart update for executing PVP tests.
JIRA: VSPERF-59
Change-Id: I41f116ab1c42f704026567a269922c07994b15a5
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
|
|
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss
Every testcase can be configured to run background load
on the DUT. Load is generated by chosen command line tool,
which must be installed according to the installation.md.
Currently 'stress' and 'stress-ng' tools are supported,
but support for new tool can be easily added.
Load can be configured by testcase configuration option 'load'.
Details about supported load generator options can be found
in conf/01_testcases.conf.
JIRA: VSPERF-23
JIRA: VSPERF-24
Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Enable PVP testing using vhost-cuse as guest access method
Recent changes:
* Move NEWS.md changes to NEWS.rst
* Update comment to vhost-cuse
* Restore config back to checkout state after make
* Merge OPNFV 1092 updates
* Add PVP-vhost-cuse to NEWS.md
* Add comment/example to GUEST_CORE_BINDING
* Move hardcoded values to conf/04_vnfs.conf
* Set default VNF to QemuDpdkVhostCuse
* Compile eventfd_link if VHOST_USER=n
* Use MAC and PCI address from conf
* Use vhost method in conf to properly set interface type
JIRA: VSPERF-59
Change-Id: Ib1159e216f3e25b9971c0935969680582683916b
Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
JIRA: VSPERF-60
Change-Id: I63695f8fa8a86cf1e64fd959658e11f3d827a3c4
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Migrate all existing VSPERF documentation to a new directory called
docs/ and convert to ReStructuredText format. It's recommended that any
doc changes in the future are tested with: http://rst.ninjs.org/.
Change-Id: I18aa574b1259986502bde4ceef1fae7c6a5c1f33
JIRA: VSPERF-60
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com
|
|
Update packages.txt with the required packages to build QEMU v2.2.1.
JIRA: VSPERF-56
Change-Id: Ifdf802de3c195b0dc5c48dcb8f098c31a1561012
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Madarang, Dino SimeonX <dino.simeonx.madarang@intel.com>
|
|
Reporting from TOIT was merged and improved. Default template was modified
to support any testcase and to show more details about system environment.
Affected files:
* docs/NEWS.md
* testcases/testcase.py
* tools/report/__init__.py
* tools/report/report.jinja
* tools/report/report.py
* tools/systeminfo.py
* vsperf
JIRA: VSPERF-71
Change-Id: I4dc84ca69e5c292eae1f8dede1411c06ae3ef8af
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
|
|
Enable booting of a VM with DPDK and run testpmd for
PVP testing.
* Added throughput and back2back tests with pvp deployment scenario in
01_testcases.conf
* PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0
* Tested on CentOS7 and Fedora 20
* Fix conflict with change 1078
Recent Changes:
* Fix merge conflict (testcase.py and testcases.conf)
* Remove QEMU_DIR. User must set QEMU_BIN
* Set bidir traffic to True
* Add flow for bi-directional traffic
* Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d
* Merge change 1096 (src: Add QEMU makefile)
* Set virtio-net-pci csum=off and other variables to off
* Move hardcoded values to conf/*
JIRA: VSPERF-56
Change-Id: I4ad184531064855493483d9833a7722c9f7d3576
Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com>
Signed-off-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|