Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Change hugepage detection to check if hugepages are configured. Also
verifies enough free hugepages are available based on test
configuration. Will result in an exception if not enough hugepages
are found. This performs the check based on the guest memory configs
as well as the dpdk socket configs.
Adds some new methods to check for free hugepages based on all
hugepages or for socket free hugepages.
Adds new logging indicitaing needed and free hugepages as well as info
level event if hugepages are not configured at recommended 1GB size.
JIRA: VSPerf-255
Change-Id: I80d5605308861070c412568d8d40339f01b9718b
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Updated version of vloop-vnf image was added into the changelog inside
installation guide.
JIRA: VSPERF-349
Change-Id: I64a1acdf2191858dc282ea6c3b588048b3bdd742
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION
amount of RAM for hugepages.
JIRA: VSPERF-290
Change-Id: I092b3831254579eeebbe45e85884828f9d749895
Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Release notes were updated with features introduced by Colorado
release.
JIRA: VSPERF-349
Change-Id: I43179028c973cae4be6746e633c27fd3419e951a
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
This patch adds to Integration docs some simple testcase examples
like a HelloWorld. The purpose is to show how to use some basic
features: rules on L3/L4 fields, MultiStream, Multi-VM setup.
Patch Set 2: removed trailing whitespaces.
Patch Set 3: moved the examples to the middle of the file to avoid
potential conflicts with the VxLan TC patch from Sugesh.
Patch Set 4: fix typo.
Patch Set 5: added descriptions on each example.
Patch Set 6: reworked description for VM Replacement TC.
JIRA: VSPERF-331
Change-Id: I9dea23c26138db874fd67f41d8de8a628db5d91f
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Wrong whitespace characters breaks automatic generation of VSPERF
documentation. It is necessary to remove wrong characters before
merge of the draft into VSPERF doc, e.g. by filtering through
tr -d '\014'
JIRA: VSPERF-324
Change-Id: Ie280f5a443c89d4235cae5eb89fdceae74ea4213
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
JIRA: VSPERF-??
Change-Id: I1f07a70bf3c8604df890defd8493f107550bf8f3
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
|
|
Documentation update based on review comments received after
the merge of original patch.
JIRA: VSPERF-288
Change-Id: I86305fa064cc07e2e0797276a7b89b1d4b23d126
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Yardstick supports execution of vsperf specific testcases.
These testcases are specified by YAML files located
inside yardstick/tests directory. Documentation describing
yardstick usage and execution of vsperf testcases is
part of the userguide.
JIRA: VSPERF-288
Change-Id: I5a575d28d344e0f3e0a1c8434e2f3231fd312d31
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
|
|
Adds support for the MoonGen packet generator.
The following traffic types are included:
* RFC 2544 Throughput: Synchronous Interface
* RFC 2544 Back 2 Back: Synchronous Interface
* Continous Flow: Synchronous Interface
JIRA: VSPERF-168
Sample log of execution can be found as an
attachment within JIRA VSPERF-168
Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Adds support for multi-queue using the following config.
* VNF = QemuDpdkVhostUser
* VSWITCH = OvsDpdkVhost
* Guest Loopback as testpmd
Adds CPU mask, nbcore, rxq, and txq options for testpmd.
Adds option for guest nic multi-queue.
Adds option for dpdkvhostuser and dpdk multi-queue enable
JIRA: VSPERF-309
Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix baseconfig to work with new Xena2544.exe versions. Reporting
option for latency/jitter collection has changed.
Added note to trafficgen document reflecting recommended version
to use for Xena2544.exe.
JIRA: VSPERF-311
Change-Id: I1974ea3c9f9e4c0935fc8adead6ddd5a92a16a04
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Make clear that 'max' refers to RFC2544 Throughput not line rate.
Change-Id: I968c1f99920b6ab0a3009622cb16c67daf5e3373
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Update integration document to reflect tests are not
just overlay tests.
* Include instructions for using macros
* Include information on test step validation
JIRA: VSPERF-298
Change-Id: Ic0d5f277b2a8b646f331e967f83421708b374f21
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Configuration options modified by VSPERF were split
between config_base and config_linuxapp files. Makefile
was modified to reflect this change.
Additional changes:
* content of qemu shared dir is copied without preservation
of attributes to avoid compilation issues due misaligned
clocks => could produce broken igb_uio module
* added support of new testpmd "Bye.." message
* DPDK sources are copied from RTE_SDK_USER directory for all
VNF variants - this has been wrongly reverted by inttest patch
Change-Id: Id502a072c1f843258496decbf031e7ba7264d459
JIRA: VSPERF-297
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Michal Weglicki <michalx.weglicki@intel.com>
|
|
|
|
Add instructions for gotcha when activating the python 3 env.
Change-Id: Ia531ca796ad15354974dee13033a8d97a42c7747
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
|
|
Updated the added features list in NEWS.rst. If there's anything I
missed please let me know.
Change-Id: I12dd63cbea293642f14e1ab3eb0d5b715e3a015e
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Upgrade OVS version tested to 2.5. Tested with OVS with DPDK and stock
OVS.
JIRA: VSPERF-254
Change-Id: I78f6cdca0b96c5b13524cec3a662e55f49320f69
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Configuration of DPDK options in ovs-vswitchd has changed.
Previously used option --dpdk was deprecated and all DPDK
related options have to be configured through ovsdb via ovs-vsctl
calls. VSPERF was modified to detect and use correct version
of DPDK configuration. New configuration options should
be put into VSWITCHD_DPDK_CONFIG dictionary.
VSPERF classes specific to OVS were refactored.
Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb
JIRA: VSPERF-291
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
|
|
Adds some documentation to the installation guide on proper
hugepage configuration to run vsperf with dpdk and/or guests.
JIRA: VSPERF-256
Change-Id: I3b85fe7d69b00841844aa82ba8faf936d7e37825
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds port ip set options as part of conf files. Allows for IPv4
address assignment. Adds ipv6 options for later implementation
when available in framework.
* Adds Xena to documentation area where available traffic gens
are listed.
JIRA: VSPERF-273
Change-Id: Ia4129222ea95f1d399d5cc0c589c9a99d7b1b81a
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Allows for execution of back 2 back tests by enabling back to back
test scenario in json file when executing Xena2544.exe. Return
results are the number of frames. Results for test execution can
be found in the coresponding JIRA ticket.
- Disabled throughput by default in json file.
- Modified test params in baseconfig file for b2b test
- Modified create_result method to use data in resulting xml file
over using inspect strategy to detect test type
- Added line to Xena installation guide for issue that was found
locally after installation
JIRA: VSPERF-264
Change-Id: I0ecd6e1ce750613c53fe308aea3f5a55cca69c20
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Generic support of SRIOV has been added. Virtual interfaces can be
used in multiplei scenarios instead of physical NICs. Virtual
functions can be directly accessed from VM by PCI passthrough method.
Another option is to use VFs with vSwtich to evaluate impact
on performance.
Additonal modifications:
* Automatic detection of NIC details has been added to simplify
configuration.
* Obsoleted configuration options have been removed.
* Logging usage within vsperf script was fixed.
* Vsperf main was refactored and final cleanup function added.
* Configurable forwarding mode of TestPMD executed inside VM.
JIRA: VSPERF-198
Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Rename LTD.Scalability.RFC2544.0PacketLoss to
LTD.Scalability.Flows.RFC2544.0PacketLoss to indicate what is being
scaled.
Change-Id: I398cbccf319fc09b621e7a68d7f81e4ff8d0b050
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Repair of documentation and configuration files where test-params
is incorrectly listed as test-param.
JIRA: VSPERF-266
Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add files for Xena Networks 2544 throughput
implementation. This allows for Xena to execute
tput tests from VSPerf. For information on how
this works please see the JIRA ticket.
Modify traffic gen guide on install instructions
for Xena. Add in scapy to requirements file. Modify
conf file for Xena chassis connection information.
* Added license info to __init__.py / baseconfig.x2544
* Set initial rate to 10% line rate for tput testing
* Modified default mac address xena_json->set_header_layer2
from aa:aa:aa:aa:aa:aa to cc:cc:cc:cc:cc:cc
* Removed obsolete multistream params
* Added traffic params to 03_traffic.conf
* Comments to explain try/catch for latency values
* Removed unused import
* Rebased to fix merge conflict
* Added Xena to available traffic gen list in conf files
JIRA: VSPERF-261
Change-Id: I3c4b4a332fd532e10b6096e9ed97a4a39d410839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
A few fixes in documentation to assure clean pdf build.
Change-Id: Ib42818820f18ee96efb98d2016f4d6d9ee3e2b62
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Stcrestclient package based script is added. Support for RFC22544
backtoback, latency, frameloss are also added, along with the throughput.
Comments Addressed:
1. Parameter name consistency. Ex: use duration (refer dummy.py).
2. Moved 'only the necessary contents of README to
configguide/trafficgen.rst.
3. Removed README file
4. Commit message format (pkt_gen: and linewrap)
5. Merged 4 scripts (throughput/backtoback/latency/frameloss)
that were rest-based into one single script.
Name: testcenter-rfc2544-test.py
6. Changed year to 2016
7. Moved imports to the top (testcenter-rfc2544-rest.py)
8. Changed prints to Log (testcenter-rfc2544-rest.py)
9. Reporting the frame loss percentage.
10. Calls to frameloss and latency are not added as the 'caller'
class TrafficControllerRFC2544 is only calling backtoback and
throughput.
11. Changed Exception, e to Exception as e for python 3
compatibility
12. Remaining prints to debug and logger.error for errors.
13. Moved Session creation under try block.
14. Removed deadcode
15. Fixed missing docstring
16. Generic to specific Exception.
17. if-if to if-elif
18. Debug level logging only under verbose flag.
19. Fixed Arguments mismatch.
20. Ordering of the imports
Note: The testcenter-rfc2544-rest.py is spawned as a separate process,
and need not be wrapped in a class.
JIRA: VSPERF-237
Change-Id: I05d2b24fca1da4ba67bc4d79206c5d755ebf8f20
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
Following development on the Etherpad, this is one of the
new test cases for Release C.
modified: docs/requirements/vswitchperf_ltd.rst
not sure if conf/01_testcases.conf also needs update,
or other conf files?
JIRA: VSPERF-241
Change-Id: Ib747c4ed729b5af96ae141493beb8f033e940ba5
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Update test summary list to include:
* LTD.Scalability.VNF.RFC2544.PacketLossProfile
* LTD.Scalability.VNF.RFC2544.PacketLossRatio
* LTD.Stress.RFC2544.0PacketLoss
JIRA: VSPERF-238
Change-Id: I62ff23c00243cadc8c818d09079dcd38a587a922
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Final version submitted as -02
On branch IETF-95draft_1b
Changes to be committed:
new file: docs/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-02.xml
new file: docs/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnf-02.txt
JIRA: VSPERF-246
Change-Id: I69262f3392cc9865be46ddff0f12ba85091d947d
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
This expanded item in the Throughput RFC description
explains a choice we made in Release A.
modified: docs/requirements/vswitchperf_ltd.rst
JIRA: VSPERF-2?? (having trouble with JIRA on 3/26)
Change-Id: Icf5132f55c8b00f99c41439ca644655dfcdf017d
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Several Comments from the IETF-94 meeting, many are captured in the meeting notes.
Section 6 of the meeting notes gives the comments:
https://www.ietf.org/proceedings/94/minutes/minutes-94-bmwg
JIRA: VSPERF-246
Change-Id: Ibe77b67789024ac48cce00147ce94cf2270d8106
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Generic support for integration testcases with first
set of tests for vswitch testing.
New test option "TestSteps" has been introduced
to define test step by step directly in configuration
file.
In case that this concept will be accepted, there
are plenty of possibilities for future improvements.
For example:
* use it also for performance tests without explicit
call of validation methods
* introduce step macros for repetitive scenarios,
so new tests can be easily written
* further generalization, which would go beyond
usage of controllers and will operate directly
with vswitch, vnf and trafficgen objects
Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2
JIRA: VSPERF-212
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests
Recent changes:
* Line wrap
* Fix GENEVE IP settings
* Add GRE and GENEVE steps to integration.rst
* Add DUT_NIC1_MAC and DUT_NIC2_MAC
* Remove unnecessary call to vswitch.set_tunnel_arp
* Move optional VXLAN/GRE/GENEVE decap settings to a different section
* Add tunnel type to report files md and rst
* Fix typo error: l4 to L4 in conf/integration/03_traffic.conf
Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Adding in prepare_python_env.sh and build_base_machine.sh
scripts to appropriate systems folder for installation on
Red Hat 7.2. Modified installation.rst to reflect these
changes.
* Fixed Header to add Red Hat
* Added myself as contributor
JIRA: VSPERF-214
Change-Id: I23a10316e77c3cec67b7f25176e8707de683af09
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|