Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I0ac84324be97de91c8d4730cd3cb73e994cf28a7
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: Id0510b96375033540fa80fe22b301fb1d0d20e40
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I2e9b432a74ee22690fdb366de619dc3a5d2ad725
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I8d948bad350ec90618edac5fc451167c06e8baa5
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This reverts commit 32a5263216d79ad34041dca55357278f092bb931.
Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I448fd909a89103b2c11cb16f91b8c646fb5adee8
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Support of VPP was implemented into VSPERF. Initial implementation
uses step driven testcases to configure P2P, PVP and PVVP network
scenarios. These testcases were prepared for three RFC2544 traffic
types, i.e. throughput, continuous stream and back to back.
VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS.
It is possible to use three types of l2 port connection supported
by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features.
Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE.
JIRA: VSPERF-495
Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I55d50656930f386b55924ee23948b2e321d2745b
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
doc structure
Remove reference to NEWS.rst in index file ... release notes will be referenced in Release section
Change-Id: I8f32c7cd23b0b2cd33703950a71cbb626c0c35fc
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch enables openSUSE Leap 42.2 systems to build and run VSPERF.
Change-Id: I182cec8a11ee5f0d70670f1ae18dd35fcc257616
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I122bdec1a7fa9a9e3da51acb31b30a231eff7890
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
All files were updated with license header. In case
of binary files is license stored in LICENSE file stored
in the same directory. Packages.txt was removed, because
file has not been used.List of packages differs according
OS distribution, all of neccesary packages are include in
instalation scripts
JIRA: VSPERF-489
Change-Id: I6ecae21b8db2a0f22fa5a66f9525352080f1fcc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.
JIRA: VSPERF-442
Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
VSPERF with DPDK 16.04 and 16.07 did not work on Fedora 20-22.
Installtion scripts for F20-F22 were deleted. VSPERF supports
F24 and F25.
JIRA: VSPERF-475
Change-Id: I3ce62b8883844cbcaab5b75fb9374068f9fced16
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Adds installer script for Fedora 25. Kernel version on Fedora 25
requires DPDK 16.11 and newer. VSPERF user must use DPDK and OVS
versions, which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: Icb86ea7655e95df57a8052e4a8523348a0c75dc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Adds installer script for Fedora 24. Kernel version on Fedora 24
requires DPDK 16.11 and newer. VSPERF user must ensure, that used DPDK
and OVS version which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: I08846d6e51faa578ea9305173174bfc49b77018a
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Documentation was updated as follows:
* description of vsperf downloading was added
* VNF section was updated
* additions to installation and virtualnev related parts
* file permissions of all documentaton files
was unified on 644
* README.md was updated with links to doc files
and online docs
* 3rd_party/readme was renamed and updated to follow
markdown syntax
JIRA: VSPERF-441
Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
|
|
|
|
New section specific to upgrade was added into documentation.
Description of configuration changes beetween Colorado and
Danube releases is discussed in detail.
JIRA: VSPERF-269
Change-Id: Ibbd1bb447e5d85c6b269ad26e10ff5d646a2bfbe
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds installer script for CentOS 7.3. Modifications are
based on installation script for RHEL7.3.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream vanilla OVS from building due to kernel
incompatibilities.
JIRA: VSPERF-452
Change-Id: Iaf05de0cf2ad7f5636d9474f351d3c7d193123cf
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Adds section about mergable buffers option to testusage doc.
Also adds drive boot type info into gotchas section of
testusage doc.
JIRA: VSPERF-459
Change-Id: I159273502663dd29f4847b0737535009a42e430d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Ixia generator related documenation was reviewed
and updated. Links to the chapters specific to
supported traffic generators were created.
JIRA: VSPERF-454
Change-Id: I3a19b054002ac8be3ed3115bc21986b3ca4ea187
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
In case of Dummy traffic generator, the test results
can be pre-configured. Configuration and examples
were described in trafficgen related chapter.
JIRA: VSPERF-458
Change-Id: I6179e98f3999e5b2df2ad4080582302bf4177cda
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Update NEWS with details about vsperf changes implemented
during Danube release.
JIRA: VSPERF-440
Change-Id: I3ebb010ef2a86806084c856257a6195b425b98a6
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Requires DPDK 16.11 or greater to support vdev flags.
Initial support for TestPMD to support guests.
Allows vsperf to execute TestPMD as a switch for pvp
test scenarios.
Can be increased in functionality later to support
multiple guest configs.
JIRA: VSPERF-406
Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Links to the default test parameters were fixed.
JIRA: VSPERF-442
Change-Id: I775d5598799050fe44a5f0fc23a28716e24c2c76
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Adds installer scripts for RHEL 7.3 OS.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream OVS from building due to kernel incompatibilities.
Provides instructions on setting up RHEL 7.3 for usage with binary
OVS packages when testing with OVS Vanilla.
Tested under RHEL 7.3
JIRA: VSPerf-322
Change-Id: If294d465f28f60a1c514a7b661ce4696ac3b5b73
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Usage of ethernet type for IPv4 was harmonized, to use
0x0800 at all places. Together with this fix a bug during
VNF cleanup was removed - VNF started by TestSteps are
tested for validity before the call of their stop() method.
It avoid vsperf crash in case, that VNF was not properly
started.
JIRA: VSPERF-436
Change-Id: Ic1a36919f5c9d707aa0aad64b5d96a1214c56cb3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Update of the rest of old traffic type names.
JIRA: VSPERF-420
Change-Id: Icf4bab7afad09f9b48ee25b9ff020c83cf2e02bd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Installation scripts were updated to support Ubuntu 16.04 LTS
and Ubuntu 16.10. Ubuntu 16.10 uses kernel 4.8, which is supported
since DPDK 16.11. It is up to the vsperf user to use DPDK and OVS
versions compatible with active Linux kernel.
JIRA: VSPERF-408
Change-Id: Ifb71de72cf6d4f9d6e2319cb5c1d7d5dcbe5314f
Signed-off-by: Goldammer, MartinX <martinx.goldammer@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Following changes are added following first review
1. Descriptions in integration/01_testcases.conf
2. Comment in conf/01_testcases.conf
3. Checking all cases of traffic types in traffic_controller_rfc2544.py
4. Removing whitespaces
5. Missing changes (throughput->rfc2544_throughput)
6. Syntax error in core/traffic_controller_rfc2544.py
Currently the traffic-type values that are provided as part of the
test case definition needs some fix to support additional traffic
- apart from rfc2544. The Current and the proposed changed is summarized
in the below table:
|--------------------------------------------------------------------|
| Parameter | Existing traffic_type value | Changed to |
----------------------------------------------------------------------
| Throughput | rfc2544 OR throughput | rfc2544_throughput |
----------------------------------------------------------------------
| Back2Back | back2back | rfc2544_back2back |
----------------------------------------------------------------------
| Continuous | continuous | rfc2544_continuous |
----------------------------------------------------------------------
JIRA: VSPERF-420
Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
|
|
Need to make VSPERF's MoonGen codebase in parity with master emmerich
MoonGen branch.
JIRA: VSPERF-400
Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Vswitchperf specific class in yardstick was updated to reflect
new functionality of --test-params. These changes have impact
on vsperf documentation and yardstick samples.
As part of this fix following changes were made:
* trafficgen mode can be executed with default configuration
* yardstick specific TC samples were updated
* dummy traffic generator was enhanced to support back2back
* dummy traffic generator was enhanced to accept traffic
results from configuration
JIRA: VSPERF-422
JIRA: VSPERF-205
Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Previously Rhel install script would build python 3 in place using
downloaded bits. It was suggested to change this to use scl method
instead. This patch modifies the build in place to use scl method
as per Centos scripts.
JIRA: VSPERF-258
Change-Id: I5b6d7b8fd7f96a315d04e1ccdfd381908e0d1ad0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
In the past, only a few configuration parameters could be
modified via --test-params CLI argument and it was not easy
to find out their complete list.
This patch adds support for generic modification of any
configuration parameter via CLI argument --test-params
or by "Parameters" section of testcase definition.
Thus it is possible to customize a vsperf configuration
environment per testcase or for each vsperf execution.
Old CLI parameters duration, pkt_sizes, rfc2544_tests
and rfc2889_trials were renamed to TRAFFICGEN_DURATION,
TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and
TRAFFICGEN_RFC2889_TRIALS to be consistent with
other configuration parameters.
JIRA: VSPERF-375
Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
In the past, step driven testcases were supported
only by integration testcases. This patch adds generic
support of TestSteps for both integration and performance
testcases. Step driven test were improved to support
modification of existing deployment. As part of
the patch a refactoring of traffic controllers
were performed. Traffic controllers were modified
to support trafficgen-off and trafficgen-pause
modes in all possible ways of trafficgen invocation.
JIRA: VSPERF-362
Change-Id: Ic8b7a9b0e7165f0a15a52279ed0f0952da9fedb8
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|