Age | Commit message (Collapse) | Author | Files | Lines |
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Adds section about mergable buffers option to testusage doc.
Also adds drive boot type info into gotchas section of
testusage doc.
JIRA: VSPERF-459
Change-Id: I159273502663dd29f4847b0737535009a42e430d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Ixia generator related documenation was reviewed
and updated. Links to the chapters specific to
supported traffic generators were created.
JIRA: VSPERF-454
Change-Id: I3a19b054002ac8be3ed3115bc21986b3ca4ea187
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
In case of Dummy traffic generator, the test results
can be pre-configured. Configuration and examples
were described in trafficgen related chapter.
JIRA: VSPERF-458
Change-Id: I6179e98f3999e5b2df2ad4080582302bf4177cda
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Update NEWS with details about vsperf changes implemented
during Danube release.
JIRA: VSPERF-440
Change-Id: I3ebb010ef2a86806084c856257a6195b425b98a6
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Requires DPDK 16.11 or greater to support vdev flags.
Initial support for TestPMD to support guests.
Allows vsperf to execute TestPMD as a switch for pvp
test scenarios.
Can be increased in functionality later to support
multiple guest configs.
JIRA: VSPERF-406
Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Links to the default test parameters were fixed.
JIRA: VSPERF-442
Change-Id: I775d5598799050fe44a5f0fc23a28716e24c2c76
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Adds installer scripts for RHEL 7.3 OS.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream OVS from building due to kernel incompatibilities.
Provides instructions on setting up RHEL 7.3 for usage with binary
OVS packages when testing with OVS Vanilla.
Tested under RHEL 7.3
JIRA: VSPerf-322
Change-Id: If294d465f28f60a1c514a7b661ce4696ac3b5b73
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Usage of ethernet type for IPv4 was harmonized, to use
0x0800 at all places. Together with this fix a bug during
VNF cleanup was removed - VNF started by TestSteps are
tested for validity before the call of their stop() method.
It avoid vsperf crash in case, that VNF was not properly
started.
JIRA: VSPERF-436
Change-Id: Ic1a36919f5c9d707aa0aad64b5d96a1214c56cb3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Update of the rest of old traffic type names.
JIRA: VSPERF-420
Change-Id: Icf4bab7afad09f9b48ee25b9ff020c83cf2e02bd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Installation scripts were updated to support Ubuntu 16.04 LTS
and Ubuntu 16.10. Ubuntu 16.10 uses kernel 4.8, which is supported
since DPDK 16.11. It is up to the vsperf user to use DPDK and OVS
versions compatible with active Linux kernel.
JIRA: VSPERF-408
Change-Id: Ifb71de72cf6d4f9d6e2319cb5c1d7d5dcbe5314f
Signed-off-by: Goldammer, MartinX <martinx.goldammer@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Following changes are added following first review
1. Descriptions in integration/01_testcases.conf
2. Comment in conf/01_testcases.conf
3. Checking all cases of traffic types in traffic_controller_rfc2544.py
4. Removing whitespaces
5. Missing changes (throughput->rfc2544_throughput)
6. Syntax error in core/traffic_controller_rfc2544.py
Currently the traffic-type values that are provided as part of the
test case definition needs some fix to support additional traffic
- apart from rfc2544. The Current and the proposed changed is summarized
in the below table:
|--------------------------------------------------------------------|
| Parameter | Existing traffic_type value | Changed to |
----------------------------------------------------------------------
| Throughput | rfc2544 OR throughput | rfc2544_throughput |
----------------------------------------------------------------------
| Back2Back | back2back | rfc2544_back2back |
----------------------------------------------------------------------
| Continuous | continuous | rfc2544_continuous |
----------------------------------------------------------------------
JIRA: VSPERF-420
Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
|
|
Need to make VSPERF's MoonGen codebase in parity with master emmerich
MoonGen branch.
JIRA: VSPERF-400
Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Vswitchperf specific class in yardstick was updated to reflect
new functionality of --test-params. These changes have impact
on vsperf documentation and yardstick samples.
As part of this fix following changes were made:
* trafficgen mode can be executed with default configuration
* yardstick specific TC samples were updated
* dummy traffic generator was enhanced to support back2back
* dummy traffic generator was enhanced to accept traffic
results from configuration
JIRA: VSPERF-422
JIRA: VSPERF-205
Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Previously Rhel install script would build python 3 in place using
downloaded bits. It was suggested to change this to use scl method
instead. This patch modifies the build in place to use scl method
as per Centos scripts.
JIRA: VSPERF-258
Change-Id: I5b6d7b8fd7f96a315d04e1ccdfd381908e0d1ad0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
In the past, only a few configuration parameters could be
modified via --test-params CLI argument and it was not easy
to find out their complete list.
This patch adds support for generic modification of any
configuration parameter via CLI argument --test-params
or by "Parameters" section of testcase definition.
Thus it is possible to customize a vsperf configuration
environment per testcase or for each vsperf execution.
Old CLI parameters duration, pkt_sizes, rfc2544_tests
and rfc2889_trials were renamed to TRAFFICGEN_DURATION,
TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and
TRAFFICGEN_RFC2889_TRIALS to be consistent with
other configuration parameters.
JIRA: VSPERF-375
Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
In the past, step driven testcases were supported
only by integration testcases. This patch adds generic
support of TestSteps for both integration and performance
testcases. Step driven test were improved to support
modification of existing deployment. As part of
the patch a refactoring of traffic controllers
were performed. Traffic controllers were modified
to support trafficgen-off and trafficgen-pause
modes in all possible ways of trafficgen invocation.
JIRA: VSPERF-362
Change-Id: Ic8b7a9b0e7165f0a15a52279ed0f0952da9fedb8
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Adds uio_pci_generic and vfio_no_iommu options for guest
driver binding. In case of SR-IOV tests with guests attached
and uio_pci_generic is selected the option will be modified
to use igb_uio instead as uio_pci_generic is not supported.
JIRA: VSPERF-397
Change-Id: I56003addacc8bf0d024cce35d41b00dd0baa8cbc
signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
JIRA: VSPERF-414
Change-Id: I1924c8a0c949695b4ec0699a206b9e39ee2ef724
Signed-off-by: Otto Sabart <osabart@redhat.com>
|
|
|
|
Testpmd has a lot of parameters and vsperf was able
to modify only a few of them through dedicated GUEST's
specific configuration options. Old configuration
options were replaced by one generic GUEST_TESTPMD_PARAMS,
which allows to modify any of existing testpmd parameters.
Detection of testpmd execution was changed to be independent
on TXQ flags setting.
Documentation was modified to reflect GUEST_TESTPMD change.
Also doc formatting was fixed at several places.
JIRA: VSPERF-380
Change-Id: Ie0bf290320f3b22ef6be6b55ed553235bbcb4aff
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
All files, which do not comply to Apache 2.0 license,
are moved into dedicated 3rd_party directory. This will
simplify license checks performed on vsperf code.
It is not required to move l2fwd module from its
current location.
JIRA: VSPERF-413
Change-Id: I6b4bd6bb5542e6db9a7ef91ee3f5f2907f93e9b8
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
JIRA: VSPERF-392
Change-Id: I44866b7d3298617003b87b015eb08bf32c4014f7
Signed-off-by: Otto Sabart <osabart@redhat.com>
|
|
|
|
JIRA: VSPERF-410
x Ramki on OVS features - the scope of benchmarking does not include
the ever-growing list of OVS features, only the general and
switch-agnostic features will be assessed.
x Justify the length of SOAK tests (with variability allowed),
mention that the goal is stability characterization, not
the typical short term benchmarks of performance.
x Fix the LTD Reference to point to Brahmaputra version
(which is frozen in the release docs)
Change-Id: I2f795cd42e7ec2e06e5cd35bbf0c1f336a5e43ca
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
This patch implements the following new CLI parameters that
can be used in the --test-params list.
1. guest_nic_queues, which overrides all GUEST_NIC_QUEUES values
2. guest_testpmd_txq, which overrides all GUEST_TESTPMD_TXQ
3. guest_testpmd_rxq, which overrides all GUEST_TESTPMD_RXQ
4. guest_testpmd_nb_cores, which overrides all GUEST_TESTPMD_NB_CORES
values
5. guest_testpmd_cpu_mask, which overrides all GUEST_TESTPMD_CPU_MASK
values
6. vswitch_dpdk_multi_queues, which overrides VSWITCH_DPDK_MULTI_QUEUES
7. guest_smp, which overrides all GUEST_SMP values
8. guest_core_binding, which overrides all GUEST_CORE_BINDING values
When they are present in the CLI the corresponding settings from the
configuration files will be overridden.
As an example a usage can be:
./vsperf --test-params "guest_nic_queues=2;guest_testpmd_txq=1;\
guest_testpmd_rxq=1;guest_testpmd_nb_cores=1"...
v2: rebase + rework to add other CLI params as suggested and update doc.
v3: changes in 'testusage.rst' doc.
JIRA: VSPERF-371
Change-Id: I140d6e068c1653d21aaa0df27532a48c4a12c151
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Open vSwitch with DPDK can optimize memory usage
in case of NUMA architecture to avoid unnecessary
memory access across NUMA slots. In a nutshell,
PMD threads serving virtual NICs are co-located at
the same NUMA slot as QEMU instance, which is using
these NICs.
This patch adds new (functional) integration testcase,
which verifies OVS vHost User numa awareness feature.
Step driven test objects were updated to allow a call
of OS utilies and evaluation of conditions. Also the
documentation was updated with the list of supported
test objects and their methods.
JIRA: VSPERF-377
Change-Id: I184e71e066d27b5b9fc9e6a9f7e240e2d1b5a0fa
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
|
|
The changes/additions, apart from spirent testcenter-specific, also
includes
to some files in conf (01_testcase and 03_traffic) and core (result-
constants, traffic_controller and component_factory) folders.
Currently, only RFC2889 Forwarding testcase is supported.
Incorporated following review suggestions:
1. Log level fixes
2. Removing unused function in results_constants.py
3. Added documentation to docs/configguide/trafficgen.rst. Userguide
will be updated once other RFC2889 tests are implemented.
4. string matching in component_factory.
5. Remove Trailing Whitespaces
JIRA: VSPERF-286
Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Currently VSPERF supports OVS, DPDK and QEMU built
from the source code only. In some cases it is required
to support installation of these tools from binary packages
available for given linux distribution. Thus VSPERF
configuration and code was modified to suport both source
and binary versions of tools. This can be configured perf
tool, so various combinations of source and binary version
are supported.
Together with new configuration also a handling of kernel
modules was modified to automatically detect and load module
dependencies.
JIRA: VSPERF-340
JIRA: VSPERF-339
Change-Id: I855cb438cbd8998bdc499613ea5e7de2526299d7
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Otto Sabart <osabart@redhat.com>
|
|
|
|
Documentation was updated as follows:
* section decorators were fixed in LTD
* links to testcase and deployment
descriptions were fixed
* duplicate labels removed from LTP<D
* fixed typos in formatting and text
* links to scalability and stress tests
fixed after their renaming
JIRA: VSPERF-349
Change-Id: I86c2b723231431388b69d3d696805de2a4e12435
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
|
|
Hyperlinks to the yardstick documentation were updated
to refer to files generated from the master branch.
JIRA: VSPERF-349
Change-Id: I248795b6a951377885492515fa9b96a694c9da5d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Remove files with IETF copyrights (Internet Draft .txt files).
I assume these files have to be removed in C-stable branch...
JIRA: VSPERF-387
Change-Id: I76709ab055f845cec0bec8d07b14c29dec349f54
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Support for deployment scenarios with any number of VMs
in both serial and parallel configuration. Detailed
content of the patch:
* VswitchControllerPXP class for multi VM support
* pvvpxx and pvpvxx deployments for xx VMs in
serial respective parallel configuration
* special GUEST_ options expansion to requested
number of VMs;
* support of GUEST_ options specific macros
#VMINDEX, #MAC(), #IP() and #EVAL()
* all GUEST specific options are turned to lists
to be VM specific
* support for VM with 1 NIC
* support for VM with multiple NIC pairs; traffic
is routed in serial or parallel between NIC paris
based on deployment scenario
* support for PVVP and PVPV scenarios using VMs
with different numbers of NICs
JIRA: VSPERF-361
Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Documentation was updated to reflect recent changes
of vloop-vnf image.
JIRA: VSPERF-374
Change-Id: I65a34a7618593a7b77c38eb2fa4c87619b937346
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|