summaryrefslogtreecommitdiffstats
path: root/docs
AgeCommit message (Collapse)AuthorFilesLines
2016-01-25docs: fix links in the quickstart guide.Maryam Tahhan1-3/+15
Fix installation and Traffic gen guide links in http://artifacts.opnfv.org/vswitchperf/docs/userguides/quickstart.html to http://artifacts.opnfv.org/vswitchperf/docs/userguides/installation.html and http://artifacts.opnfv.org/vswitchperf/docs/userguides/trafficgen.html. Also added where vloop_vnf can be downloaded from. JIRA: VSPERF-186 Change-Id: I585367b1c717fdbb0b56b7f0312fe9c70f51594f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik1-5/+52
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21docs: installation guide updateMartin Klozik1-12/+33
Installation guide should be OS agnostic. Change-Id: Idba63925a27fd204c6542ca886381a56c0415dab JIRA: VSPERF-150 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-21Add testpmd as vswitch classRobert Wojciechowicz2-6/+65
The purpose of using testpmd instead of OVS is to get the baseline of the DUT when performing hardware offloading operations. There are supported different checksum calculation and txq flags settings. Change-Id: I93c9b45dcb31eaa1f610b7e061f3dd5936b0e6ec JIRA: VSPERF-193 Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-13test_spec: LTD: RFC.WorstN-BestN testMiroslav Miklus1-0/+91
- Test ID: LTD.Throughput.RFC2544.WorstN-BestN JIRA: VSPERF-123 Change-Id: Ief04d8c415a77f4a9b77ba0d2a52653376b37ff1 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-13test_spec: LTD: UpdatesMiroslav Miklus1-13/+20
- document updates JIRA: VSPERF-123 Change-Id: Ic156bb43dbb04e8895ac3e194c0f485517af93ef Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04docs: fix all/ index.rst links.Maryam Tahhan1-4/+4
JIRA: VSPERF-160 Change-Id: I5722fd8340e009cb1885981e6e40468df4d9216c Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-04docs: update release docs after reviewingMaryam Tahhan1-17/+5
Review and update release documentation for Release B. JIRA: VSPERF-160 Change-Id: I43c85639ed010f950dc3c85eecfe2ff47b65214d Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-23docs: update design docs after reviewingMaryam Tahhan1-13/+13
Review and update design documentation for Release B. JIRA: VSPERF-160 Change-Id: I2c2167b5ac9161e30aacd277060da22a559dd0c2 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
ravatar'>Maryam Tahhan22-404/+754 Move the traffic gen instructions to a separate user guide and add information on usage of the Dummy traffic generator. Update docs to fix PDF build failure and do general clean-up. Removed the numbering from the LTD and added the numbered directive to automate numbering for sections and headers. Add comment anchors that reflect the section numbers. Change-Id: I984ca38456a891c439697ebc1da041bc1d828a15 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-12-16Back2Back: update default paramsMaryam Tahhan1-4/+6 Update the default duration of a back to back test to be 2 seconds which is the minimum recommended by RFC2544, and update the Trials to be 50, which is also the default value specified by the RFC. This patch also fixes the tcl script to allow for the minimum framesize to be sent from the traffic gen. JIRA: Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> 2015-12-11test_spec: LTD: new topologyMiroslav Miklus1-1/+47 - Physical port → VNF → vSwitch → VNF → physical port updated topology with pNIC-VF this provides us ability to fill up the box with multiple VNFs JIRA: VSPERF-123 Change-Id: Iea991b2cd2973c07ecbc300bb6d413a182cae992 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> 2015-12-11updates to use new doc toolchainRyota MIBU2-27/+0 Change-Id: I5009a996b2e581638f159ed37a1c56ac53c0c71f Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com> 2015-12-08Results: Integrate with opnfv_test_dashboardRadek Zetik1-0/+6 All the test projects generate results in different format. The goal of a testing dashboard is to provide a consistent view of the different tests from the different projects. We need to enable the data collection for VSPERF, in other words VSPERF pushes data using a REST API. The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name. Example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" JIRA: VSPERF-112 Change-Id: I37255414eebcc2ff0c12109c508dcd984663a830 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> 2015-12-02vnfs: configurable loopback application support inside VMMartin Klozik1-0/+28 For PVP and PVVP deployments, traffic inside virtual machines must be forwarded between its interfaces. There are several forwarding options supported by VSPERF, including DPDK testpmd, Huawei l2fwd kernel module and linux bridge. Another option is, that VM image has built in forwarding functionality and vsperf doesn't configure it itself. User can select VM loopback application by configuration option GUEST_LOOPBACK (per VM) or by SCALAR cli option guest_loopback (global settings). Selected guest loopback application(s) will be written into test results CSV file and test report MD file. Default wildcarded guest login prompt was added. Guest startup guarding timer can be configured. Path to OVS kernel module has been fixed. Change-Id: If738da1ea09112f9cf2267afcbc99a6797f3a03a JIRA: VSPERF-130 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-11-26docs: update installation guide and gsg.Maryam Tahhan2-11/+73 Update installation guide and gsg to include latest updates to vsperf build and installation. JIRA: VSPERF-127 Change-Id: I773ea240eb90e191f4f53ed977651056817413f1 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> 2015-11-26doc: update template and conf filesRyota MIBU6-103/+26 JIRA: RELENG-16 Change-Id: I0aaac15c1d1a1031cbc113db594a342c60b7eb1d Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com> 2015-11-04docs: reorganize docs for the sphinx buildRamprasad Velavarthipati14-19/+129 Reorganize docs into the appropriate folders for the new sphinx build. JIRA: VSPERF-80 Change-Id: I9dcd74e092ce52546a0986b92a1ebb2b5b7419bf Signed-off-by: Ramprasad Velavarthipati <ram.v@freescale.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Trinath Somanchi <trinath.somanchi@gmail.com> 2015-11-03bugfix of Vanilla OVS testing scenariosMartin Klozik1-1/+1 Automatic selection of OVS and DPDK directories must be performed before initialization of modules is called. Otherwise modules will use wrong values with unpredictable results. Default directory values have been changed to point to sources build by make. Clean&sweep of directory usage was performed. Configuration file for pylint has been renamed to follow pylint naming convention. Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb JIRA: VSPERF-121 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> 2015-10-29First phase of Spirent Traffic Gen integrationspirentbrian1-3/+56 Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4 2015-10-29docs: fixup documentation errors and locationsMaryam Tahhan2-13/+13 Fixup the location of all rst documentation and any errors in the ltd. JIRA:VSPERF-60 Change-Id: I1472d540b1b4eca4ab038d079bfb0ef2f0c5ebcd Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> 2015-10-23systems directory scripts for Centos7Martin Klozik1-46/+9 Installation scripts for Centos7 have been updated with new packages. Script will install also python3 packages and create python virtual environment. As a last step DPDK, OVS and QEMU will be compiled. So after script execution VSPERF should be ready for use. It is recommended to execute installation script from user account with password less sudo access. Otherwise python environment must be copied over from root home directory. After VSPERF generic Makefile will be created by VSPERF-114, it can be enhanced to call build script too. Change-Id: I6ff5d2660af29cf8be134a4cae3b1d7b559892fa JIRA: VSPERF-93 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Abdul Halim <abdul.halim@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> 2015-10-21Add Pylint to VSPERF commit gateMartin Klozik1-0/+12 Initial pylint config file has been created to follow current code structure and design. A few issues have been fixed, so currently 56 of 67 files have rating 10/10. There are still issues to be fixed, mainly TODOs/FIXMEs and missing impelentation of abstract class members. Change-Id: Icf5b12c2150258f8ac657f8d50b47a697d1660a0 JIRA: VSPERF-91 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> 2015-10-16test_spec: Need deployment scenario in RFC2889 Forwarding Rate testAl Morton1-0/+8 The RFC 2889 Forwarding Rate test requires a Deployment Scenario Section - was missing. JIRA: VSPERF-102 Change-Id: Iaf661a6bbb9ad52f23147f9444f23d96a82ceb2d Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-16test_spec: LTD: Add Caution for Scaleability Address Time-out.Al Morton1-1/+11 LTD.Scalability.RFC2544.0PacketLoss needs to add the caution that all flows must be learned before running Throughput testing, and no flows can be allowed to time-out during the test. JIRA: VSPERF-108 Change-Id: I95ae20a978b7af660b358450e67ce60939b0b7c1 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-16test_spec: IETF Draft: Update to reflect dev since July and IETF-93 commentsAl Morton3-26/+2279 Among the Updates needed are: - Several New tests created since July, add to Matrix section. - Re-named tests: fix in Matrix section. - Link to Summaries on Wiki. - Link to Test Setup Figures on Wiki. - Add some general points on New Test Equipment Challenges/Metrics. - Mention future test specs, and IFA003 as one source. JIRA: VSPERF-120 Change-Id: I981b0b6301a208d20220f67784b4591aa3f51338 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-16test_spec: LTD: Some "Throughput" Tests belong in another categoryAl Morton1-97/+107 In the LTD, some of the tests with "Throughput" in the title are not actually testing throughput in the data path. Since the test names are used by TOIT/VSPERF to group similar tests for batch execution, it's important that the names accurately represent the test methods and metrics measured. JIRA: VSPERF-98 Change-Id: I620ddc0779232f2dd325379005faba8692fea18c Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-16test_spec: LTD: Missing Pre-requisites in some of the "new" tests.Al Morton1-2/+6 A few of the tests should call out a prerequisite. LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability and LTD.Scalability.RFC2544.0PacketLoss are examples. JIRA: VSPERF-107 Change-Id: I1ca653ac765f9494b48759764103dfc9d42a42f1 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-15test_spec: LTD:Throughput.RFC2544.Profile Metric ClarificationsAl Morton1-4/+4 LTD.Throughput.RFC2544.Profile refers to the metric "maximum forwarding rate" but implies that this is the zero% loss rate, which would be the Throughput level (MFR is usually higher than Throughput, because MFR allows losses). It may be that MFR and Throughput are just interchanged in the last two paragraphs of the description. JIRA: VSPERF-110 Change-Id: I4f36fd4ce66f2f4ebee4f60a11ad03adfb2b3b7c Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-15test_spec: LTD: Memory BW Test - probable issue caused by md to rst conversionAl Morton1-11/+14 The following text in the Description needs to be formatted as a list in .RST: Furthermore: - the ratio of reads to writes should be recorded. JIRA: VSPERF-109 Change-Id: I3b6c819d1ac07cc466c747d3552cbcc4de5f34bf Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-14test_spec: Expand deployment scenario in RFC2889 Broadcast Rate testAl Morton1-1/+3 In the RFC 2889 Broadcast rate testing, four test ports are required. One of the ports is connected to the test device, so it can send broadcast frames and listen for miss-routed frames. JIRA: VSPERF-103 Change-Id: I5ee3d20c71d7debf6c7b09fc094f72b2d4c10684 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> 2015-10-12Enable PVP and PVVP deployments for Vanilla OVSMartin Klozik2-1/+44 Support for PVP and PVVP scenerios using Vanilla OVS was added. VMs are configured to forward traffic between virtual interfaces by standard linux capabilities. Traffic generator script was updated to accept MAC and IP address configuration to allow VM forwarding configuration. VSPERF-66, VSPERF-70 Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> 2015-10-12docs: Add overview of the structure of vsperf codeBilly O'Mahony7-0/+298 Text & sequence diagrams as both source and png. JIRA: VSPERF-106 Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Change-Id: I33f57fba85710ab4cfc72d0a5d06db6f653545d6 2015-10-08test_spec: Note need for 3 test ports in RFC2889 address/cacheAl Morton1-3/+8 The RFC 2889 Address Learning and Cache Capacity tests require a listening port to check for flooded frames. JIRA: VSPERF-74 Change-Id: I7b4d2461e819d01d642c9c4d95b938dfbe056f2c Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-10-07Enable PVVP deployment for DPDK Vhost User and Vhost CuseMartin Klozik2-6/+8 Generic PVVP deployment support has been added. Two new testcase scenarios for throughput and back2back tests with PVVP deployment were added. Original implementation of PVP has been refactored Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/04_vnf.conf modified: core/__init__.py modified: core/component_factory.py modified: core/loader/loader_servant.py modified: core/vnf_controller.py deleted: core/vnf_controller_p2p.py deleted: core/vnf_controller_pvp.py modified: core/vswitch_controller_p2p.py modified: core/vswitch_controller_pvp.py new file: core/vswitch_controller_pvvp.py modified: docs/to-be-reorganized/NEWS.rst modified: docs/to-be-reorganized/quickstart.rst modified: src/dpdk/dpdk.py modified: src/ovs/ofctl.py modified: testcases/testcase.py modified: tools/tasks.py new file: vnfs/qemu/qemu.py new file: vnfs/qemu/qemu_dpdk.py modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py modified: vnfs/qemu/qemu_dpdk_vhost_user.py modified: vnfs/vnf/vnf.py modified: vswitches/ovs_dpdk_vhost.py Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab JIRA: VSPERF-68, VSPERF-69 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> 2015-10-07test_spec: Add Traffic Profiles (IMIX) maintained by FunctestAl Morton1-1/+2 The Current list of fixed frame sizes need to be augmented with IMIX Traffic Profiles in the test framework. JIRA: VSPERF-100 Change-Id: I97425c09c1d692bae56f2518d479b83a282eb7d1 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-10-06test_spec: Fix WIDE Fig and Note need for full-mesh ports in RFC2889 testsAl Morton1-31/+41 The RFC 2889 tests require Full Mesh on multiple ports. Modify the bunny-ears fig to show this (and address -99 in the process) JIRA: VSPERF-99 JIRA: VSPERF-101 Change-Id: Id67cb5ef6748c83858a90033534f960874614c06 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-09-29Sysmetrics implementation updateMartin Klozik1-0/+6 New sysmetrics implementation is based on pidstat command line tool from sysstat package. Old non-functional implementation was removed. Reporting was refactored to generate report after each TC from values already available in memory. Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/05_collector.conf deleted: core/collector_controller.py modified: core/component_factory.py modified: docs/NEWS.rst modified: packages.txt modified: requirements.txt modified: testcases/testcase.py modified: tools/collectors/collector/collector.py modified: tools/collectors/sysmetrics/__init__.py deleted: tools/collectors/sysmetrics/linuxmetrics.py new file: tools/collectors/sysmetrics/pidstat.py modified: tools/report/report.jinja modified: tools/report/report.py modified: tools/systeminfo.py modified: vsperf JIRA: VSPERF-67 Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> 2015-09-11Move documentation to new sphinx buildAric Gardner9-1/+68 TODO: Reorganize documentation into properly named subfolders TODO: Add logos to documentation (see index.rst for example) Note you can see the results of this change via a link in the gerrit comments below NOTE: The merge job for your project has not been enabled, this code will not go to the artifacts page upon a merge. you can merge it and work on it in your own time, please contact me to enable the merge (the merge job will make this documentation avaliable to the public on artifacts.opnfv.org) JIRA:RELENG-15 Change-Id: I3f3d8c9d7fceae90e0ed824b66bdaf7a8ea66328 Signed-off-by: Aric Gardner <agardner@linuxfoundation.org> 2015-09-09Improvement: Expand background details on PDV in the LTDAl Morton1-0/+18 Expand description of Packet Delay Variation to capture the additional details which will be important to measurement design. Measurmeent devices may be implementing the RFC 5481 PDV metric for the firt time, so som general details will be useful to include in the LTD. Addresses MT's comments. JIRA: VSPERF-73 Change-Id: I60524969f72bb00519e8070ae51e219d857c554e Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-09-01vswitches: Fix error in loading eventfd moduleDino Simeon Madarang1-0/+49 Load eventfd only when vhost-cuse is specified as the guest access method. This commit also includes quickstart update for executing PVP tests. JIRA: VSPERF-59 Change-Id: I41f116ab1c42f704026567a269922c07994b15a5 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> 2015-08-26Support of configurable background load and implementation of ↵Martin Klozik2-3/+18 LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss Every testcase can be configured to run background load on the DUT. Load is generated by chosen command line tool, which must be installed according to the installation.md. Currently 'stress' and 'stress-ng' tools are supported, but support for new tool can be easily added. Load can be configured by testcase configuration option 'load'. Details about supported load generator options can be found in conf/01_testcases.conf. JIRA: VSPERF-23 JIRA: VSPERF-24 Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> 2015-08-25vnfs: Enable PVP using vhost-cuseDino Simeon Madarang1-0/+1 Enable PVP testing using vhost-cuse as guest access method Recent changes: * Move NEWS.md changes to NEWS.rst * Update comment to vhost-cuse * Restore config back to checkout state after make * Merge OPNFV 1092 updates * Add PVP-vhost-cuse to NEWS.md * Add comment/example to GUEST_CORE_BINDING * Move hardcoded values to conf/04_vnfs.conf * Set default VNF to QemuDpdkVhostCuse * Compile eventfd_link if VHOST_USER=n * Use MAC and PCI address from conf * Use vhost method in conf to properly set interface type JIRA: VSPERF-59 Change-Id: Ib1159e216f3e25b9971c0935969680582683916b Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> 2015-08-24docs: Add Gotchas to quickstart guide.Maryam Tahhan1-0/+24 JIRA: VSPERF-60 Change-Id: I63695f8fa8a86cf1e64fd959658e11f3d827a3c4 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> 2015-08-24docs: Migrate Docs to RST format and new dir docs/Maryam Tahhan9-230/+3121 Migrate all existing VSPERF documentation to a new directory called docs/ and convert to ReStructuredText format. It's recommended that any doc changes in the future are tested with: http://rst.ninjs.org/. Change-Id: I18aa574b1259986502bde4ceef1fae7c6a5c1f33 JIRA: VSPERF-60 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com 2015-08-21vsperf: update package dependencies for QEMUMaryam Tahhan1-2/+2 Update packages.txt with the required packages to build QEMU v2.2.1. JIRA: VSPERF-56 Change-Id: Ifdf802de3c195b0dc5c48dcb8f098c31a1561012 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Madarang, Dino SimeonX <dino.simeonx.madarang@intel.com> 2015-08-19Initial reporting implemenationMartin Klozik1-1/+7 Reporting from TOIT was merged and improved. Default template was modified to support any testcase and to show more details about system environment. Affected files: * docs/NEWS.md * testcases/testcase.py * tools/report/__init__.py * tools/report/report.jinja * tools/report/report.py * tools/systeminfo.py * vsperf JIRA: VSPERF-71 Change-Id: I4dc84ca69e5c292eae1f8dede1411c06ae3ef8af Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> 2015-08-18vnfs: Enable PVP using vhost-userDino Simeon Madarang2-0/+15 Enable booting of a VM with DPDK and run testpmd for PVP testing. * Added throughput and back2back tests with pvp deployment scenario in 01_testcases.conf * PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0 * Tested on CentOS7 and Fedora 20 * Fix conflict with change 1078 Recent Changes: * Fix merge conflict (testcase.py and testcases.conf) * Remove QEMU_DIR. User must set QEMU_BIN * Set bidir traffic to True * Add flow for bi-directional traffic * Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d * Merge change 1096 (src: Add QEMU makefile) * Set virtio-net-pci csum=off and other variables to off * Move hardcoded values to conf/* JIRA: VSPERF-56 Change-Id: I4ad184531064855493483d9833a7722c9f7d3576 Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Signed-off-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> 2015-08-13Add new testcase for LTD.Scalability.RFC2544.0PacketLossMartin Klozik1-0/+1 This test adds a multistream config item, taking the required number of flows to setup in the traffic, to the existing testcase and then running the standard 2544 Throughput test. The config is plumbed through from the 01_testcase.conf via ITraffic to the IxNet. 01_testcase.conf contains new parameter MultiStream for 2544 Throughput test. JIRA: VSPERF-19 Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>