Age | Commit message (Collapse) | Author | Files | Lines |
|
Hyperlinks to the yardstick documentation were updated
to refer to files generated from the master branch.
JIRA: VSPERF-349
Change-Id: I248795b6a951377885492515fa9b96a694c9da5d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
The test case for verifying the vxlan tunneling feature without using any
ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and
generate tunnel traffic in the deployment. The packet flow in the test case is
as follows
TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT
ENCAP-PKT - Encapsulate the ingress packet to a tunnel type.
MOD-PKT - Modify the tunnel header to match the following decap interface.
DECAP-PKT - Decapsulate the newly generated tunneled packet.
Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54
Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
|
|
Enables multi-queue option for OVS versions 2.5.0 or less with
dpdk. Instead of enabling MQ on a port by port basis this sets
the global MQ option after starting the ovs switch.
JIRA: VSPERF-372
Change-Id: I245c76779695518d0005122d8214bbf3f141bb96
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fixes minor grammar and link issues.
JIRA: VSPERF-349
Change-Id: Id8708aee5b099287b5c99e79ca6da9ab8778897f
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
This patch adds to Integration docs some simple testcase examples
like a HelloWorld. The purpose is to show how to use some basic
features: rules on L3/L4 fields, MultiStream, Multi-VM setup.
Patch Set 2: removed trailing whitespaces.
Patch Set 3: moved the examples to the middle of the file to avoid
potential conflicts with the VxLan TC patch from Sugesh.
Patch Set 4: fix typo.
Patch Set 5: added descriptions on each example.
Patch Set 6: reworked description for VM Replacement TC.
JIRA: VSPERF-331
Change-Id: I9dea23c26138db874fd67f41d8de8a628db5d91f
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Documentation update based on review comments received after
the merge of original patch.
JIRA: VSPERF-288
Change-Id: I86305fa064cc07e2e0797276a7b89b1d4b23d126
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Yardstick supports execution of vsperf specific testcases.
These testcases are specified by YAML files located
inside yardstick/tests directory. Documentation describing
yardstick usage and execution of vsperf testcases is
part of the userguide.
JIRA: VSPERF-288
Change-Id: I5a575d28d344e0f3e0a1c8434e2f3231fd312d31
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Adds support for multi-queue using the following config.
* VNF = QemuDpdkVhostUser
* VSWITCH = OvsDpdkVhost
* Guest Loopback as testpmd
Adds CPU mask, nbcore, rxq, and txq options for testpmd.
Adds option for guest nic multi-queue.
Adds option for dpdkvhostuser and dpdk multi-queue enable
JIRA: VSPERF-309
Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Update integration document to reflect tests are not
just overlay tests.
* Include instructions for using macros
* Include information on test step validation
JIRA: VSPERF-298
Change-Id: Ic0d5f277b2a8b646f331e967f83421708b374f21
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Configuration of DPDK options in ovs-vswitchd has changed.
Previously used option --dpdk was deprecated and all DPDK
related options have to be configured through ovsdb via ovs-vsctl
calls. VSPERF was modified to detect and use correct version
of DPDK configuration. New configuration options should
be put into VSWITCHD_DPDK_CONFIG dictionary.
VSPERF classes specific to OVS were refactored.
Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb
JIRA: VSPERF-291
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Generic support of SRIOV has been added. Virtual interfaces can be
used in multiplei scenarios instead of physical NICs. Virtual
functions can be directly accessed from VM by PCI passthrough method.
Another option is to use VFs with vSwtich to evaluate impact
on performance.
Additonal modifications:
* Automatic detection of NIC details has been added to simplify
configuration.
* Obsoleted configuration options have been removed.
* Logging usage within vsperf script was fixed.
* Vsperf main was refactored and final cleanup function added.
* Configurable forwarding mode of TestPMD executed inside VM.
JIRA: VSPERF-198
Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Repair of documentation and configuration files where test-params
is incorrectly listed as test-param.
JIRA: VSPERF-266
Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Generic support for integration testcases with first
set of tests for vswitch testing.
New test option "TestSteps" has been introduced
to define test step by step directly in configuration
file.
In case that this concept will be accepted, there
are plenty of possibilities for future improvements.
For example:
* use it also for performance tests without explicit
call of validation methods
* introduce step macros for repetitive scenarios,
so new tests can be easily written
* further generalization, which would go beyond
usage of controllers and will operate directly
with vswitch, vnf and trafficgen objects
Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2
JIRA: VSPERF-212
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests
Recent changes:
* Line wrap
* Fix GENEVE IP settings
* Add GRE and GENEVE steps to integration.rst
* Add DUT_NIC1_MAC and DUT_NIC2_MAC
* Remove unnecessary call to vswitch.set_tunnel_arp
* Move optional VXLAN/GRE/GENEVE decap settings to a different section
* Add tunnel type to report files md and rst
* Fix typo error: l4 to L4 in conf/integration/03_traffic.conf
Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Both documentation and traffic generator API are updated
to match current code logic. Additional default values
are added into TRAFFIC_DEFAULTS dictionary. Constructor
of TestCase class uses default values from TRAFFIC_DEFAULTS
instead of magic numbers.
Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6
JIRA: VSPERF-253
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Enable vfio_pci support for DPDK in the case where the end user
doesn't want to use igb_uio.
Changes:
* Use generic functions to strip the path and .ko extension from the
module to be inserted/removed.
* Removed debug line in Modules_Manager.
* Removed commented code.
* Fixed all pylint issues.
JIRA: VSPERF-249
Change-Id: I69c9077735879bcbf7ce5c970c1ec53c219e9f90
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Is required or it leaves the context of the document segment in the userguide.
Change-Id: Idb476b7926ba0fce11ed3be54eaa6837e34bff66
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
|
|
Add a mode to pause the traffic generator before transmission to bypass
manual setup if required.
Change-Id: Iad62a5e7cb83a311e2814d8a9ee2bc9b2d2ed4de
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
JIRA: VSPERF-222
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Updated the heading and moved to a new filename for composite docs.
Added a link to the vsp userguide at the end of the doc.
Change-Id: I416228be9347275bcd4c90e394678e4eb93198d4
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
|
|
Add Creative Commons Creative Commons license to all documentation in
vsperf.
JIRA: VSPERF-239
Change-Id: I88721205a36078f6e0d4a4c5dd842907729d2b6b
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add option to generate GENEVE frames for decapsulation
tests.
IxNet 7.3X does not have a native support of GENEVE protocol. The
template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported
into IxNET for this testcase to work.
Recent changes:
* Updated dependency
* Updated userguide
* Move inner frame variables & srcport/dstport to L4
Change-Id: I90f5fb256b51ae44bc1bc7983c599c9dbbffea08
JIRA: VSPERF-192
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Mark D. Gray <mark.d.gray@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add option to generate GRE frames for testing GRE decapsulation
tests.
Recent changes:
* Fix merge conflict
* Updated userguides
* Complete set of fields and working decap
* Move GRE ixnet calls to if statement to reuse inner frame settings
Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528
JIRA: VSPERF-191
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Measure OVS DPDK VXLAN decapsulation performance.
The DUT is configured as a VTEP (VXLAN Tunnel Endpoint)
which performs decapsulation of frames and sends traffic to
the 2nd traffic generator port.
This test is unidirectional.
Recent changes:
* Userguide update
* Move src/dstport from L2 to L4 (conf, TCL)
* Fix 'TestCase' object has no attribute '_tunnel_operation' error when
running non overlay tests
* Fix merge conflict
* Move doc to docs/userguide/integration.rst
* Add setting of DUT_NIC1_MAC and setting of other
variables to docs/userguide/integration.rst
Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c
JIRA: VSPERF-190
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com>
Signed-off-by: Timo Puha <timox.puha@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com
|
|
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance.
This patch creates a new deployment scenario, Overlay_P2P.
The DUT is configured as a TEP (Tunnel Endpoint)
which performs encapsulation of frames and sends traffic to
the 2nd traffic generator port. The traffic generator in this
case receives an encapsulated frame. No decapsulation is performed
in this testcase.
Introduce a vsperf param, --run-integration, to filter tests to
integration tests. When running integration tests, variables defined
in the directory conf/integration/*conf as well as the conf/*.conf
are available.
This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer.
Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Migrate the installation guide for vsperf to a configguide directory,
update the links to the installation guide. Re-add top level index.rst
and remove the all directory. Update release documentation with vsperf
Rel B support.
Change-Id: Ib643b9d3581d8109b85c377027c8cc6be4b797fc
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|