Age | Commit message (Collapse) | Author | Files | Lines |
|
The patch expands the vsperf --test-params argument with list
functionality, which enables running multiple tests with different
parameters. If more tests are run then parameters provided, the
last parameters will be reused. Example:
./vsperf --test-params "['','TRAFFICGEN_PKTSIZE = (64,)']"
phy2phy_cont phy2phy_cont
CUMULATIVE_PARAMS if true, instead of using the default settings,
each test will take the parameters of the previous test before
applying it's own.
The patch also adds the vsperf --matrix argument which analyzes and
compares the results of all the tests run, printing it as a table,
as well as saving it into a file in the results directory.
MATRIX_METRIC metric used by Performance Matrix to compare tests.
JIRA: VSPERF-554
Change-Id: I71530ddf110890612236a7e57039f249609c835b
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Patch introduces a set of testcases with T-Rex running inside VM.
JIRA: VSPERF-560
Change-Id: I5b0a0220a2d72428ae1210ee9590d39abdfb9c1d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: RadoslawX Glombiowski <radoslawx.glombiowski@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Created new chapter on Traffic Capture and added short descriptions and explanation for each of the three methods currently supported by VSPERF. Subchapters include Traffic Capture in the VM, Traffic for testing NICs with Hardware acceleration and Traffic Capture on the Trraffic Generator.
JIRA: VSPERF-556
Change-Id: I280c54aa73961e0bbb61b40e8fe476bd3e92ff7d
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Traffic can be captured also at DUT side. Two options are supported by
vsperf:
1) Traffic is captured inside VM after it has been processed
by vSwitch. This can be used for verification of vSwitch frame
modification functionality, including HW offloading at ingress side.
2) Another NIC under the test (NIC2) is added into standard VSPERF DUT
setup. Traffic is then forwarded from TGen through NIC and vSwitch
to NIC2 and then over patch cable back to NIC2, the vSwitch, NIC and
to the traffic generator. This setup supports also verification of HW
offloading at egress side of NIC2 and thus it can be used for validation
of smart NICS.
Both options above are traffic generator agnostic if compared to direct
support of traffic capture by traffic generator. This patch introduces
example testcases for both options.
Detailed documentation will be pushed as a standalone patch.
JIRA: VSPERF-556
Change-Id: I23e12e45768ae4dbe9442f74d8391c3d5b2c7895
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch adds support of access to VMs deployed automatically
by deployment scenario (e.g. pvp, pvvp4, etc.). It also modifies
filter for checking output of executed commands to correctly
handle different end of line encodings (i.e. \n vs. \n\r).
JIRA: VSPERF-539
Change-Id: Ifc796d992b90e316bad5853aaefce79e439e294d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
A set of regression tests for verification of OVS/DPDK
features was introduced. Following features are tested:
* DPDK NIC Support
* DPDK Hotplug Support
* RX Checksum Support
* Flow Control Support
* Multiqueue Support
* Vhost User
* Virtual Devices Support
* NUMA Support
* Jumbo Frame Support
* Rate Limiting
* Quality of Service
JIRA: VSPERF-539
Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch introduces several improvements and small bugfixes
of teststeps. These changes were identified during implementation
of OVS/DPDK regression tests.
Patch content:
* teststeps: step aliases were implemented
* teststeps: improved filtering by regex for any step, which returns string
or list of stings; filter will process all lines
* teststeps: support for log object
* teststeps: support for trafficgen get_results call
* teststeps: configurable suppression of step validation
* trafficgen: remove old results before traffic is executed
* trafficgen: support for flow control on/off (IxNet)
* trafficgen: support for configurable learning frames (IxNet)
* trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION
and _LOSSRATE
* vnf: flush pexpect output of previous commands
* vnf: use execute_and_wait() to ensure correct cmds order
* vnf: dpdk vHost User interface name set according to its type,
e.g. dpdkvhostuserclient
* vswitch: support for OVS restart
* decap: simplify configuration of tunneling decapsulation tests
* settings: values of all configuration options are restored after TC execution
* modified formatting of test description used by --list
* testcase name and description is logged before its execution
* small bugfixes
JIRA: VSPERF-539
Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Fix issues with grammar and accuracy.
JIRA: VSPERF-536
Change-Id: Ia703d306bb7a14b11e09ab4077b8adfa5fb5e6af
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
List of vsperf "inbox" testcases was added into documentation.
This patch also fixes:
* a few SPHINX warnings and errors
* empty userguide index
JIRA: VSPERF-519
Change-Id: I417ed40130f0c7de4f76551f3f1cac0cb1e6da89
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
A set of tests was introduced with focus on L3, L4 and VxLAN performance
of OVS and VPP. New testcases were created for phy2phy network scenario.
In case of PVP and PVVP, only OVS testcases are available.
Notes:
* two sets of OVS P2P testcases were created, one creates unique flow
for each IP address involved in the test (performance sensitive);
Second set inserts just one flow with large network mask (tests with
_mask suffix).
* three different types of VPP P2P L3 testcases were created to
demonstrate performance impact of multi ARP entries or IP routes.
* VPP multi ARP record based testcases use a set of "workarounds"
to load a large number of ARP entries. It is not possible to use
"set ip arp count" syntax, as it doesn't work well for large count
values (e.g. 60K)
* OVS VxLAN testcases utilize existing OP2P deployment scenario and thus
it can be used also with GRE and GENEVE tunnel types. Tunnel type
to be used is defined by test configuration option "Tunnel Type".
JIRA: VSPERF-518
Change-Id: I65adad976f12d8625d918a1996eb42693c511ee1
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
|
|
Support of vhost-user client mode has been added for both
OVS and VPP. VSPERF configures vhost-user server mode
in vswitches by default for backward compatibility.
Support of vhost-user server mode is deprecated
in OVS and it can be removed in future releases. Once it will
happen, we have to change vsperf default behavior to
usage of vhost-user client ports at vswitch side.
This patch also fixes processing of boolean configuration
parameters passed via --test-params option. In the past
it was not possible to set boolean value to False through
--test-params option.
JIRA: VSPERF-517
Change-Id: I65e341f820edd6c720043a4acc74c5140b05db18
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
A set of improvements was introduced to enhance step driven
testcases capabilities.
Details:
* delay among test steps is configurable by TEST_STEP_DELAY
parameter
* step driven tool function exec was renamed to exec_shell
* new step driven tool function exec_python was introduced to execute
a python code
* new step driven object sleep was introduced to pause test execution
for defined number of seconds.
* fixed bug in settings.validate_getValue() to correctly validate
access of parameters modified by TEST_PARAMS
* new #PARAM() macro was introduced to allow references among
configuration parameters
* multistream support has been added into ixnetrfc2544v2.tcl,
which is used for tunneling protocols test (op2p deployment)
* fixed bug in op2p deployment to list interfaces and flows
from both bridges involved in the test
* test report updated to state exact rfcxxxx type of traffic
type, e.g. rfc2544_continuous
* test report of step driven testcases was updated to contain
measured values from traffic generator in CSV report
* method for ovs flow comparison was modified to normalize
IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8)
JIRA: VSPERF-512
Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
|
|
JIRA: VSPERF-510
This patch is used to implement the mechanism to pass extra qemu
cpu options required to achieve better results/performance. Also
used to implement a mechanism to pin the vCPU threads to another
pCPU core which helps in reducing the noise from housekeeping
thread and packet loss.
Change-Id: Ic40fd47d7c4f5556f7e240c6ca671a0535d06ece
Signed-off-by: Gundarapu Kalyan Reddy <reddyx.gundarapu@intel.com>
|
|
VSPERF makefiles were updated to automatically download and compile
VPP. VPP will not be installed into the OS, but it will be executed
from VSPERF's src subdirectory. Thus underlying OS is not affected
by VPP build required by VSPERF. It also allows quick switch among
different versions of various tools used by VSPERF.
As part of this patch, VERIFY and MERGE CI jobs were updated to
build VPP and test it with basic set of integration tests.
JIRA: VSPERF-493
Change-Id: I958b9031c4fefc87c4c63a471d2ba1a0db1eaaa4
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
Add jumbo frame support for all packet forwarding applications
inside guest for pxp testing. Enable jumbo frame support for
OvsVanilla, OvsDpdkVhostUser, and Packet forwarding.
Add minor fix for missing method issue when running packet
forwarding tests. The get_version method was missing in
the packet_forwaring core module.
JIRA: VSPERF-501
Change-Id: Ia99975f47c64259ed2566bde3c85b2779c309e80
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: Iad5c130936a815c41265b29053d2978808ff14bb
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I0ac84324be97de91c8d4730cd3cb73e994cf28a7
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I8d948bad350ec90618edac5fc451167c06e8baa5
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This reverts commit 32a5263216d79ad34041dca55357278f092bb931.
Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|