Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 32a5263216d79ad34041dca55357278f092bb931.
Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Support of VPP was implemented into VSPERF. Initial implementation
uses step driven testcases to configure P2P, PVP and PVVP network
scenarios. These testcases were prepared for three RFC2544 traffic
types, i.e. throughput, continuous stream and back to back.
VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS.
It is possible to use three types of l2 port connection supported
by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features.
Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE.
JIRA: VSPERF-495
Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.
JIRA: VSPERF-442
Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Ixia generator related documenation was reviewed
and updated. Links to the chapters specific to
supported traffic generators were created.
JIRA: VSPERF-454
Change-Id: I3a19b054002ac8be3ed3115bc21986b3ca4ea187
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
In case of Dummy traffic generator, the test results
can be pre-configured. Configuration and examples
were described in trafficgen related chapter.
JIRA: VSPERF-458
Change-Id: I6179e98f3999e5b2df2ad4080582302bf4177cda
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Following changes are added following first review
1. Descriptions in integration/01_testcases.conf
2. Comment in conf/01_testcases.conf
3. Checking all cases of traffic types in traffic_controller_rfc2544.py
4. Removing whitespaces
5. Missing changes (throughput->rfc2544_throughput)
6. Syntax error in core/traffic_controller_rfc2544.py
Currently the traffic-type values that are provided as part of the
test case definition needs some fix to support additional traffic
- apart from rfc2544. The Current and the proposed changed is summarized
in the below table:
|--------------------------------------------------------------------|
| Parameter | Existing traffic_type value | Changed to |
----------------------------------------------------------------------
| Throughput | rfc2544 OR throughput | rfc2544_throughput |
----------------------------------------------------------------------
| Back2Back | back2back | rfc2544_back2back |
----------------------------------------------------------------------
| Continuous | continuous | rfc2544_continuous |
----------------------------------------------------------------------
JIRA: VSPERF-420
Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Need to make VSPERF's MoonGen codebase in parity with master emmerich
MoonGen branch.
JIRA: VSPERF-400
Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
In the past, only a few configuration parameters could be
modified via --test-params CLI argument and it was not easy
to find out their complete list.
This patch adds support for generic modification of any
configuration parameter via CLI argument --test-params
or by "Parameters" section of testcase definition.
Thus it is possible to customize a vsperf configuration
environment per testcase or for each vsperf execution.
Old CLI parameters duration, pkt_sizes, rfc2544_tests
and rfc2889_trials were renamed to TRAFFICGEN_DURATION,
TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and
TRAFFICGEN_RFC2889_TRIALS to be consistent with
other configuration parameters.
JIRA: VSPERF-375
Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
JIRA: VSPERF-414
Change-Id: I1924c8a0c949695b4ec0699a206b9e39ee2ef724
Signed-off-by: Otto Sabart <osabart@redhat.com>
|
|
The changes/additions, apart from spirent testcenter-specific, also
includes
to some files in conf (01_testcase and 03_traffic) and core (result-
constants, traffic_controller and component_factory) folders.
Currently, only RFC2889 Forwarding testcase is supported.
Incorporated following review suggestions:
1. Log level fixes
2. Removing unused function in results_constants.py
3. Added documentation to docs/configguide/trafficgen.rst. Userguide
will be updated once other RFC2889 tests are implemented.
4. string matching in component_factory.
5. Remove Trailing Whitespaces
JIRA: VSPERF-286
Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Fixes minor grammar and link issues.
JIRA: VSPERF-349
Change-Id: Id8708aee5b099287b5c99e79ca6da9ab8778897f
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Updating MoonGen configuration guide
JIRA: VSPERF-370
Change-Id: I577491a6ece249a6162e1a3595a8682b826e5734
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Adds options to Xena for testing options when running RFC 2544
throughput testing.
JIRA: VSPERF-369
Change-Id: I3145bd1a4d697d7b06cafda4f9d77cce859d1839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
Adds support for the MoonGen packet generator.
The following traffic types are included:
* RFC 2544 Throughput: Synchronous Interface
* RFC 2544 Back 2 Back: Synchronous Interface
* Continous Flow: Synchronous Interface
JIRA: VSPERF-168
Sample log of execution can be found as an
attachment within JIRA VSPERF-168
Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Fix baseconfig to work with new Xena2544.exe versions. Reporting
option for latency/jitter collection has changed.
Added note to trafficgen document reflecting recommended version
to use for Xena2544.exe.
JIRA: VSPERF-311
Change-Id: I1974ea3c9f9e4c0935fc8adead6ddd5a92a16a04
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds port ip set options as part of conf files. Allows for IPv4
address assignment. Adds ipv6 options for later implementation
when available in framework.
* Adds Xena to documentation area where available traffic gens
are listed.
JIRA: VSPERF-273
Change-Id: Ia4129222ea95f1d399d5cc0c589c9a99d7b1b81a
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Allows for execution of back 2 back tests by enabling back to back
test scenario in json file when executing Xena2544.exe. Return
results are the number of frames. Results for test execution can
be found in the coresponding JIRA ticket.
- Disabled throughput by default in json file.
- Modified test params in baseconfig file for b2b test
- Modified create_result method to use data in resulting xml file
over using inspect strategy to detect test type
- Added line to Xena installation guide for issue that was found
locally after installation
JIRA: VSPERF-264
Change-Id: I0ecd6e1ce750613c53fe308aea3f5a55cca69c20
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Repair of documentation and configuration files where test-params
is incorrectly listed as test-param.
JIRA: VSPERF-266
Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add files for Xena Networks 2544 throughput
implementation. This allows for Xena to execute
tput tests from VSPerf. For information on how
this works please see the JIRA ticket.
Modify traffic gen guide on install instructions
for Xena. Add in scapy to requirements file. Modify
conf file for Xena chassis connection information.
* Added license info to __init__.py / baseconfig.x2544
* Set initial rate to 10% line rate for tput testing
* Modified default mac address xena_json->set_header_layer2
from aa:aa:aa:aa:aa:aa to cc:cc:cc:cc:cc:cc
* Removed obsolete multistream params
* Added traffic params to 03_traffic.conf
* Comments to explain try/catch for latency values
* Removed unused import
* Rebased to fix merge conflict
* Added Xena to available traffic gen list in conf files
JIRA: VSPERF-261
Change-Id: I3c4b4a332fd532e10b6096e9ed97a4a39d410839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Stcrestclient package based script is added. Support for RFC22544
backtoback, latency, frameloss are also added, along with the throughput.
Comments Addressed:
1. Parameter name consistency. Ex: use duration (refer dummy.py).
2. Moved 'only the necessary contents of README to
configguide/trafficgen.rst.
3. Removed README file
4. Commit message format (pkt_gen: and linewrap)
5. Merged 4 scripts (throughput/backtoback/latency/frameloss)
that were rest-based into one single script.
Name: testcenter-rfc2544-test.py
6. Changed year to 2016
7. Moved imports to the top (testcenter-rfc2544-rest.py)
8. Changed prints to Log (testcenter-rfc2544-rest.py)
9. Reporting the frame loss percentage.
10. Calls to frameloss and latency are not added as the 'caller'
class TrafficControllerRFC2544 is only calling backtoback and
throughput.
11. Changed Exception, e to Exception as e for python 3
compatibility
12. Remaining prints to debug and logger.error for errors.
13. Moved Session creation under try block.
14. Removed deadcode
15. Fixed missing docstring
16. Generic to specific Exception.
17. if-if to if-elif
18. Debug level logging only under verbose flag.
19. Fixed Arguments mismatch.
20. Ordering of the imports
Note: The testcenter-rfc2544-rest.py is spawned as a separate process,
and need not be wrapped in a class.
JIRA: VSPERF-237
Change-Id: I05d2b24fca1da4ba67bc4d79206c5d755ebf8f20
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
Both documentation and traffic generator API are updated
to match current code logic. Additional default values
are added into TRAFFIC_DEFAULTS dictionary. Constructor
of TestCase class uses default values from TRAFFIC_DEFAULTS
instead of magic numbers.
Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6
JIRA: VSPERF-253
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add Creative Commons Creative Commons license to missed documentation
in vsperf. One of these files is not on the stable Brahmaputra branch.
JIRA: VSPERF-239
Change-Id: If1420c3b84ba5ba9e1b4c1f9d75347f1b6e6117f
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Migrate the installation guide for vsperf to a configguide directory,
update the links to the installation guide. Re-add top level index.rst
and remove the all directory. Update release documentation with vsperf
Rel B support.
Change-Id: Ib643b9d3581d8109b85c377027c8cc6be4b797fc
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|