aboutsummaryrefslogtreecommitdiffstats
path: root/conf
AgeCommit message (Collapse)AuthorFilesLines
2018-01-22bugfix: Define _EXECUTED_PIDS in config fileMartin Klozik1-0/+3
Add definition of internal _EXECUTED_PIDS list into generic configuration file. JIRA: VSPERF-556 Change-Id: I6c237cb563c0a37bf806561d1f841587796399b8 Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2018-01-12trex: Add support for traffic captureMartin Klozik2-0/+69
A support of traffic capture was added into T-Rex. It allows to write a functional tests, which will verify proper vSwitch functionality by inspection of packets received by T-Rex. A testcase example was added into integration testcases. JIRA: VSPERF-556 Change-Id: I5ad28479ca2ec29760b68f24510af1a6d74866ae Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-01-11capture: Traffic capture examplesMartin Klozik2-0/+134
Traffic can be captured also at DUT side. Two options are supported by vsperf: 1) Traffic is captured inside VM after it has been processed by vSwitch. This can be used for verification of vSwitch frame modification functionality, including HW offloading at ingress side. 2) Another NIC under the test (NIC2) is added into standard VSPERF DUT setup. Traffic is then forwarded from TGen through NIC and vSwitch to NIC2 and then over patch cable back to NIC2, the vSwitch, NIC and to the traffic generator. This setup supports also verification of HW offloading at egress side of NIC2 and thus it can be used for validation of smart NICS. Both options above are traffic generator agnostic if compared to direct support of traffic capture by traffic generator. This patch introduces example testcases for both options. Detailed documentation will be pushed as a standalone patch. JIRA: VSPERF-556 Change-Id: I23e12e45768ae4dbe9442f74d8391c3d5b2c7895 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-19Trex_2544_verification: Add verification functionality to Trex codeChristian Trautman2-8/+11
- Adds T-Rex verification step as implemented by other trafficgens - Adds check in rfc2544 loop for if no packets are received to fail test immediately - Refactors the trial code to support the verification option - Adds trial_run function - Removed unused line speed configuration setting JIRA: VSPERF-553 Change-Id: Ie324fe8fb6bf79fe0dc337b91af2bf83e901a8ab Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-13trex_learning: Add learning packet option to T-Rex testingChristian Trautman2-2/+8
Adds packet learning option which is available on other Traffic generators as a feature. This adds this feature to the Trex implementation inside of VSPerf. JIRA: VSPERF-547 Change-Id: Iaf4d0721b22eb780c25e29295c112d4fcb47b22c Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-11-20regression: OVS/DPDK regression testsMartin Klozik1-0/+1689
A set of regression tests for verification of OVS/DPDK features was introduced. Following features are tested: * DPDK NIC Support * DPDK Hotplug Support * RX Checksum Support * Flow Control Support * Multiqueue Support * Vhost User * Virtual Devices Support * NUMA Support * Jumbo Frame Support * Rate Limiting * Quality of Service JIRA: VSPERF-539 Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20ci: Skip VPP tests if neededMartin Klozik1-0/+11
If VPP can't be executed properly, then VPP tests will be skipped for VERIFY and MERGE jobs. It sometimes happens, that VPP can't be executed at builders used for VERIFY & MERGE jobs execution. These failures are not caused by patches themselves, but they are blocking standard review & merge process. Thus VPP tests will be suppressed in case that VPP can't be started at all. This change is not related to DAILY job, which is executed at POD dedicated to VSPERF project. It means that VPP tests are always executed by DAILY job. Change-Id: I4752601561b94a82482c403305bc3f24779f538b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20Merge "paths: Modify algorithm for PATHS verification"Martin Klozik1-1/+1
2017-11-15Merge "teststeps: Improvements and bugfixing of teststeps"Martin Klozik5-10/+31
2017-11-14vpp: Define vppctl socket nameMartin Klozik1-0/+1
Newer versions of VPP require an explicit definition of CLI socket file for proper functionality. Otherwise vppctl is not able to connect to running vpp process and thus vsperf is not able to configure and control vpp. Change-Id: Id0df75fd0894e22b1b4d7fa05e16f49efe20d3ab Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-09paths: Modify algorithm for PATHS verificationMartin Klozik1-1/+1
VSPERF verifies if PATHS to the tools (vSwitch, VNF, etc.) are valid. This check was modified to take into the account tools required by selected testcase. It will help to avoid runtime errors triggered by missing tools, which are not essential for testcase execution. Change-Id: Ifcfea983cad1bdbc8c1f08c7a0281001005410df Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-07Merge "load_gen: Supporting loading of load_gen via loader."Martin Klozik2-3/+27
2017-11-03load_gen: Supporting loading of load_gen via loader.Sridhar K. N. Rao2-3/+27
Currently all tools are loaded via loader utility, except load_gen. Load_gens were loaded directly through component_factory. This patch adds support to load load_gens through loader utility. The changes are as follows: 1. Configuration changes:The common.conf include configuration of directory. testcases.conf includes changes to load configuration, where tool is no more part of the load-configuration. The custom.conf has configuration of LOADGEN to be used - this configuration replaces the earlier 'tool' configuration parameter. 2. loader_utility_changes: In loader.py, loadgen_loader is defined, which is used in new get_loadgen function. 3. component_factory changes: in create_loadgen, similar to other tools, the function just retuns the object of loadgen_class. 4. Renaming of Dummy load_gen: Loader fails to load properly a dummy loadgen due to name-clash with dummy in pkt_gen. To avoid this name clash dummy is renamed to dummyloadgen. 5. testcase changes: create_loadgen is now called with output of loader's get_loadgen_class. 6. Fixed Pylint Errors and extra-space at the end. 7. Included CLI options support for --loadgen and --list-loadgens. Thanks to Martin K. 8. Added the missing loadgen parameter in testcases.conf. 9. Fixed the missing comma error. 10. Added CI change in build-vsperf.sh 11. Fixed configuration reading in stress/stress.py JIRA: VSPERF-533 Change-Id: I3fbb259618825a12fef55320a748a4f02509190b Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-11-03teststeps: Improvements and bugfixing of teststepsMartin Klozik5-10/+31
This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-10-20Merge "trex_multistream: Add multistream support to T-Rex"Martin Klozik2-2/+2
2017-10-20trex_multistream: Add multistream support to T-RexChristian Trautman2-2/+2
Adds incremental source multi-stream functionality to T-Rex traffic generator code in VSPerf. JIRA: VSPERF-532 Change-Id: Ib5ba326699d89350ac1715c9a4276e5fa46a133e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-10-19conf: Fix default VPP configurationMartin Klozik1-1/+2
Number of VPP workers (aka PMD threads) was not specified explicitly in default configuration file. Configuration has been fixed to use the same cores as OVS with DPDK. Change-Id: Icd3e5d6f429435fbc1ff580891f4b182d1c48729 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-09-25trex_prom: Add promiscuous option for trex for SRIOV testsChristian Trautman2-0/+4
Adds option to enable promiscuous mode for Trex traffic generator to allow for SR-IOV tests to work correctly. Trex by default only accepts packets based on destination MAC address matching what is configured on server in /etc/trex-cfg.yaml. This removes that limitation since SR-IOV tests require mac addresses to be modified in the generated packets to correctly route packets to the relevant VFs. JIRA: VSPERF-531 Change-Id: I19b64f364c8a1b656994c82c96f47a68b92486d8 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-09-20trex: RFC2544 Throughput bugfixingMartin Goldammer1-0/+4
Changes introduced by patch: * Ensure that correct results with given lossreate are returned * Add threshold value to specify the accurancy of RFC2544 Throughput measurement. Default value is 0.05. JIRA: VSPERF-530 Change-Id: I8148deba9039c3a0feb6394d6671aa10c5afaf0a Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-31trex: Add support Trex traffic generatorMartin Goldammer2-1/+57
Topology are two physical servers, on first is trex and second is VSPERF. Trex is running in stateless mode this means that on server where is located trex repo is running trex binary file and VSPERF working with server via python API. JIRA: VSPERF-528 Change-Id: Id8819495325ebc13fdce365f4af0e040ce68cd0e Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-23opnfvresultdb: Update data reported to result DBMartin Klozik1-1/+1
Data reported to result DB were updated to comply with recent API version and requirements. JIRA: VSPERF-488 Change-Id: I6ab02ea54d99099e88b0d5ab6e9745ee8297f544 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com> Signed-off-by: Morgan Richomme <morgan.richomme@orange.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-14Merge "tests: L3, L4 and VxLAN tests for OVS & VPP"Martin Klozik3-17/+1026
2017-08-04tests: L3, L4 and VxLAN tests for OVS & VPPMartin Klozik3-17/+1026
A set of tests was introduced with focus on L3, L4 and VxLAN performance of OVS and VPP. New testcases were created for phy2phy network scenario. In case of PVP and PVVP, only OVS testcases are available. Notes: * two sets of OVS P2P testcases were created, one creates unique flow for each IP address involved in the test (performance sensitive); Second set inserts just one flow with large network mask (tests with _mask suffix). * three different types of VPP P2P L3 testcases were created to demonstrate performance impact of multi ARP entries or IP routes. * VPP multi ARP record based testcases use a set of "workarounds" to load a large number of ARP entries. It is not possible to use "set ip arp count" syntax, as it doesn't work well for large count values (e.g. 60K) * OVS VxLAN testcases utilize existing OP2P deployment scenario and thus it can be used also with GRE and GENEVE tunnel types. Tunnel type to be used is defined by test configuration option "Tunnel Type". JIRA: VSPERF-518 Change-Id: I65adad976f12d8625d918a1996eb42693c511ee1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
2017-07-21dpdk: Support dpdk vhost-user client modeMartin Klozik2-1/+8
Support of vhost-user client mode has been added for both OVS and VPP. VSPERF configures vhost-user server mode in vswitches by default for backward compatibility. Support of vhost-user server mode is deprecated in OVS and it can be removed in future releases. Once it will happen, we have to change vsperf default behavior to usage of vhost-user client ports at vswitch side. This patch also fixes processing of boolean configuration parameters passed via --test-params option. In the past it was not possible to set boolean value to False through --test-params option. JIRA: VSPERF-517 Change-Id: I65e341f820edd6c720043a4acc74c5140b05db18 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-06-23ovs: Update OVS to use DPDK 17.02Martin Klozik1-1/+1
Versions of VSPERF tools were updated to use OVS with DPDK 17.02 support by default. Currently used VPP version uses DPDK 17.02 already. VSPERF was updated to support new path to the dpdk devbind tool. JIRA: VSPERF-516 Change-Id: I004d0531553c974d604635d50f601cd4326f2f7d Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-06-02tests: Improvement of step driven testcasesMartin Klozik4-23/+62
A set of improvements was introduced to enhance step driven testcases capabilities. Details: * delay among test steps is configurable by TEST_STEP_DELAY parameter * step driven tool function exec was renamed to exec_shell * new step driven tool function exec_python was introduced to execute a python code * new step driven object sleep was introduced to pause test execution for defined number of seconds. * fixed bug in settings.validate_getValue() to correctly validate access of parameters modified by TEST_PARAMS * new #PARAM() macro was introduced to allow references among configuration parameters * multistream support has been added into ixnetrfc2544v2.tcl, which is used for tunneling protocols test (op2p deployment) * fixed bug in op2p deployment to list interfaces and flows from both bridges involved in the test * test report updated to state exact rfcxxxx type of traffic type, e.g. rfc2544_continuous * test report of step driven testcases was updated to contain measured values from traffic generator in CSV report * method for ovs flow comparison was modified to normalize IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8) JIRA: VSPERF-512 Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
2017-05-31Qemu: Mechanism to pass extra qemu cpu features and pin vCPU threadskalyanreddy1-0/+9
JIRA: VSPERF-510 This patch is used to implement the mechanism to pass extra qemu cpu options required to achieve better results/performance. Also used to implement a mechanism to pin the vCPU threads to another pCPU core which helps in reducing the noise from housekeeping thread and packet loss. Change-Id: Ic40fd47d7c4f5556f7e240c6ca671a0535d06ece Signed-off-by: Gundarapu Kalyan Reddy <reddyx.gundarapu@intel.com>
2017-05-03build: Automated VPP buildMartin Klozik2-4/+28
VSPERF makefiles were updated to automatically download and compile VPP. VPP will not be installed into the OS, but it will be executed from VSPERF's src subdirectory. Thus underlying OS is not affected by VPP build required by VSPERF. It also allows quick switch among different versions of various tools used by VSPERF. As part of this patch, VERIFY and MERGE CI jobs were updated to build VPP and test it with basic set of integration tests. JIRA: VSPERF-493 Change-Id: I958b9031c4fefc87c4c63a471d2ba1a0db1eaaa4 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-04-20Merge "ixia: Support of 1 NIC connection to trafficgen"Martin Klozik1-0/+42
2017-04-19Merge "xena_verify: Add final verification option to Xena"Martin Klozik2-0/+16
2017-04-19ixia: Support of 1 NIC connection to trafficgenMartin Klozik1-0/+42
For some testcases it is useful to have only one connection between traffic generator and DUT. Thus IxNet class was extended to support such connection. Feature is enabled if both IXIA ports are set to the same value. New integration testcase ixnet_pvp_tput_1nic was created to demonstrate this feature. Unused code was removed from 3rd_party/ixia/ixnetrfc2544.tcl to simplify introduction of new features and to speed up IXIA configuration. JIRA: VSPERF-503 Change-Id: I92ab24fa58eeb1ccb7f00ac7f3530ffca7b99241 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-04-18xena_verify: Add final verification option to XenaChristian Trautman2-0/+16
Adds final verification option to Xena traffic generator inside VSPerf. Works by running the Xena2544.exe again after the initial run is complete with modified values inside the json file. If the final verify fails it will revert the settings and continue the in a pattern based on if the smart search is enabled. JIRA: VSPERF-506 Change-Id: Ic272628c489b88989f67549bd020af7354dc9b91 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-03-30jumbo_frame: Add jumbo frame supportChristian Trautman1-0/+3
Add jumbo frame support for all packet forwarding applications inside guest for pxp testing. Enable jumbo frame support for OvsVanilla, OvsDpdkVhostUser, and Packet forwarding. Add minor fix for missing method issue when running packet forwarding tests. The get_version method was missing in the packet_forwaring core module. JIRA: VSPERF-501 Change-Id: Ia99975f47c64259ed2566bde3c85b2779c309e80 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-03-24ixia: Make L3 and L4 headers optionalMartin Klozik1-0/+10
During testing it is sometimes useful to generate pure L2 traffic without L3 or L4 related headers. IxNetwork TCL script was updated to support this option. Generic TRAFFIC array was enhanced by on/off switch for L3 and L4 headers. Thus it can be implemented by other traffic generators in the future, if this feature will prove itself useful. JIRA: VSPERF-500 Change-Id: I723c703e5d6ef609fd5b7db366871278a4730203 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-24multistream: Support huge number of streamsMartin Klozik2-4/+5
Restriction of 64K streams was limited only to L4 stream type. In case of L3 and L2 stream type, it is possible to define unlimited number of streams to be simulated by traffic generator. JIRA: VSPERF-498 Change-Id: I4ce3253299473127d135c01543999a8593b9556f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-15vpp: Initial support of VPP vSwitchMartin Klozik4-5/+239
Support of VPP was implemented into VSPERF. Initial implementation uses step driven testcases to configure P2P, PVP and PVVP network scenarios. These testcases were prepared for three RFC2544 traffic types, i.e. throughput, continuous stream and back to back. VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS. It is possible to use three types of l2 port connection supported by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features. Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE. JIRA: VSPERF-495 Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-01-27pkt_gen: STC - RFC 2889 Address Learning and Caching SupportSridhar K. N. Rao1-1/+21
This patch adds RFC-2889 address-learning-rate test and address-caching-capacity tests. The patch includes following changes 1. 01_testcases.conf: testcase definitions are added for new tests 2. results_constants.py: 3 new results constants are added, removed unsupported constants 3. testcenter-rfc2889-rest.py: Added support to these two new tests. Removed un-necessary synchronization of db-file. 5 new configuration parameters are added - which are explained in (4). 4. trafficgen.rst: Configuration description for rfc2889 tests are added. Stale information is removed. 5. testcenter.py: Support for two new tests are added. Separate functions for results analysis and parameter settings are added. 6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py, based on the traffic_type, are added. Removed trailing whitespaces from trafficgen.rst JIRA: VSPERF-395 Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2017-01-24Merge "rte_target_fix: Resolves blank rte_target issue in conf file"Martin Klozik1-1/+1
2017-01-24rte_target_fix: Resolves blank rte_target issue in conf fileChristian Trautman1-1/+1
Modifies RTE_TARGET in conf/10_custom.conf which overwrites default value in 02_vswitch.conf file. JIRA: VSPERF-359 Change-Id: I83561d94543a6543764cd76eb4376ccdc091a4cd Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-24docs: Installation doc updatedMartin Klozik1-4/+5
Documentation was updated as follows: * description of vsperf downloading was added * VNF section was updated * additions to installation and virtualnev related parts * file permissions of all documentaton files was unified on 644 * README.md was updated with links to doc files and online docs * 3rd_party/readme was renamed and updated to follow markdown syntax JIRA: VSPERF-441 Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
2017-01-23xena_cont_learning: Adds learning preemption to continuous trafficChristian Trautman2-0/+10
Adds a configurable learning preemptive option when running xena continuous traffic tests. This resolves a missing packet or two when running OVS tests at flow rates that should not drop packets. JIRA: VSPERF-473 Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-16traffic: Configurable traffic detailsMartin Klozik4-130/+326
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2017-01-13testpmd_pvp: Adds pkt_fwd to allow pvp topology testingChristian Trautman1-0/+1
Requires DPDK 16.11 or greater to support vdev flags. Initial support for TestPMD to support guests. Allows vsperf to execute TestPMD as a switch for pvp test scenarios. Can be increased in functionality later to support multiple guest configs. JIRA: VSPERF-406 Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-06rhel73_install: Provide installer script for RHEL 7.3Christian Trautman1-0/+14
Adds installer scripts for RHEL 7.3 OS. Modified dpdk makefile to allow upstream dpdk to build. Prevents upstream OVS from building due to kernel incompatibilities. Provides instructions on setting up RHEL 7.3 for usage with binary OVS packages when testing with OVS Vanilla. Tested under RHEL 7.3 JIRA: VSPerf-322 Change-Id: If294d465f28f60a1c514a7b661ce4696ac3b5b73 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-12-07Merge "conf:Traffic-type naming convention and consistency"Martin Klozik2-55/+55
2016-12-07conf:Traffic-type naming convention and consistencySridhar K. N. Rao2-55/+55
Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-11-30yardstick: CLI params support for yardstick TCsMartin Klozik1-0/+23
Vswitchperf specific class in yardstick was updated to reflect new functionality of --test-params. These changes have impact on vsperf documentation and yardstick samples. As part of this fix following changes were made: * trafficgen mode can be executed with default configuration * yardstick specific TC samples were updated * dummy traffic generator was enhanced to support back2back * dummy traffic generator was enhanced to accept traffic results from configuration JIRA: VSPERF-422 JIRA: VSPERF-205 Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-21ci: Decrease hugepages size for VERIFY&MERGE jobsMartin Klozik1-2/+6
VSPERF by default requires allocation of hugepages with total size of 10GB. However for MERGE and VERIFY jobs less memory is required and default size of 10GB can cause issues. Thus amount of memory was limited and other minor enhancements were introduced: * sysstat system package is installed at nodes running VERIFY and MERGE jobs * WHITELIST_NICS was set to empty list by default to avoid automatic bind of NICs to DPDK. Old default value could cut off network connection to DUT. * imports were fixed at both integration.py and testcase.py JIRA: VSPERF-391 Change-Id: Ic07d68f4591ae697c1b8edeae6c0cffe47c065ce Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-11-11Merge "cli: Modify configuration via CLI"Martin Klozik7-28/+108
2016-11-09cli: Modify configuration via CLIMartin Klozik7-28/+108
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>