aboutsummaryrefslogtreecommitdiffstats
path: root/conf
AgeCommit message (Collapse)AuthorFilesLines
2016-08-16Integration Test: Multi-VM with parallel PVP connections.Antonio Fischetti3-19/+259
Implementation of 3 testcases with multi-VMs in parallel. Flows are explicitly set on UDP destination ports so that each packet is sent to a specific VM. Topology is: Phy1-VM1-Phy2, Phy1-VM2-Phy2,.. This patch requires change #16855 "ovs/ofctl: Fix validation method for complex flows." JIRA: VSPERF-326 Change-Id: I59d23354bc9c6db470a59faba13bdcd6f2beb19d Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-08-16integration: Support for VxLAN TC without using overlay traffic gen.Sugesh Chandran2-0/+23
The test case for verifying the vxlan tunneling feature without using any ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and generate tunnel traffic in the deployment. The packet flow in the test case is as follows TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT ENCAP-PKT - Encapsulate the ingress packet to a tunnel type. MOD-PKT - Modify the tunnel header to match the following decap interface. DECAP-PKT - Decapsulate the newly generated tunneled packet. Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54 Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
2016-08-10Merge "Xena_2544_tput_options: Add options for rfc 2544 testing"Maryam Tahhan2-0/+18
2016-08-09Xena_2544_tput_options: Add options for rfc 2544 testingChristian Trautman2-0/+18
Adds options to Xena for testing options when running RFC 2544 throughput testing. JIRA: VSPERF-369 Change-Id: I3145bd1a4d697d7b06cafda4f9d77cce859d1839 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-08-09hugepages: change default num pages + deallocateMaryam Tahhan1-2/+2
Change the default number of allocated pages to the min 10GB. Deallocate hugepages if we allocated them on the fly. Change-Id: If9946cec423dd095c1ca1ab3bee3698e2f025047 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-08-08Merge "dpdk: Testpmd forwarding mode changes in v16.07"Maryam Tahhan2-2/+8
2016-08-05dpdk: Testpmd forwarding mode changes in v16.07Martin Klozik2-2/+8
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07. Retry option is supported by multiple forwarding modes now. Former "mac_retry" mode can be replaced by "mac retry" construct. JIRA: VSPERF-333 Change-Id: I1563427985966264f07d10b1a8351784fe999d74 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-08-05Merge "Hugepages: on the fly allocation."Maryam Tahhan1-0/+5
2016-08-04Hugepages: on the fly allocation.Mars Toktonaliev1-0/+5
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION amount of RAM for hugepages. JIRA: VSPERF-290 Change-Id: I092b3831254579eeebbe45e85884828f9d749895 Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
2016-08-03pkt_gen: MoonGen start rates not correctbmichalo2-0/+7
The VSPERF traffic profile for starting rate is in a percentage of line rate. MoonGen programs its starting rate as Mpps. Therefore the traffic profile for VSPERF needs to be converted to a MoonGen format. There was a hardcoding of 14.88 that was used for the starting frame rate for all frame sizes. This needs to be corrected to take into account all frame sizes. JIRA: VSPERF-350 Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-20pkt_gen: Moongen class name not consistent with name in conf filesbmichalo2-2/+2
Need to change naming to 'Moongen' for consistent naming between conf files and class JIRA: VSPERF-323 Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-18conf/integration: Fix typo on Integration testcase example.Antonio Fischetti1-1/+1
This patch fixes a typo in the integration testcase example, otherwise settings like {"guest_loopback" : "linux_bridge"} are ignored. JIRA: ONP-6635 Change-Id: Iab61d36e70f96f4a6c1f98a506753dc7fa090140 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-07-01Merge "multi-queue: Add basic multi-queue functionality"Christian Trautman2-0/+19
2016-06-30pkt_gen: Adding MoonGen traffic generatorbmichalo2-1/+25
Adds support for the MoonGen packet generator. The following traffic types are included: * RFC 2544 Throughput: Synchronous Interface * RFC 2544 Back 2 Back: Synchronous Interface * Continous Flow: Synchronous Interface JIRA: VSPERF-168 Sample log of execution can be found as an attachment within JIRA VSPERF-168 Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-06-29multi-queue: Add basic multi-queue functionalityChristian Trautman2-0/+19
Adds support for multi-queue using the following config. * VNF = QemuDpdkVhostUser * VSWITCH = OvsDpdkVhost * Guest Loopback as testpmd Adds CPU mask, nbcore, rxq, and txq options for testpmd. Adds option for guest nic multi-queue. Adds option for dpdkvhostuser and dpdk multi-queue enable JIRA: VSPERF-309 Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-06dpdk: Support new way of DPDK configuration in ovs-vswitchdMartin Klozik1-0/+14
Configuration of DPDK options in ovs-vswitchd has changed. Previously used option --dpdk was deprecated and all DPDK related options have to be configured through ovsdb via ovs-vsctl calls. VSPERF was modified to detect and use correct version of DPDK configuration. New configuration options should be put into VSWITCHD_DPDK_CONFIG dictionary. VSPERF classes specific to OVS were refactored. Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb JIRA: VSPERF-291 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-04Merge "bidirectional value: Fix inconsistency for bidir param"Maryam Tahhan2-23/+25
2016-05-04bidirectional value: Fix inconsistency for bidir paramChristian Trautman2-23/+25
Fixes bi-directional param and enforces string type in testcase configuration. Modifies all instance where bi directional value is used to string. * Changes documentation to specify value type as needed * Changes traffic defaults to use string for bidir value * Fixes testcases configuration files to use bidir as str * Change testcase conf documentation to note enforcement of string type * Sets bidir to title format to keep consitency in traffic profile when passed to traffic generators * Fix pvp/pvvp check for bidir value * Raise exception if testcase configuration is not set as str for bidir value * Change Xena bi-dir check to string compare instead of typecasting to boolean to compare. JIRA: VSPERF-282 Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-04bugfix: Graceful shutdown of VM - improvementMartin Klozik1-1/+1
Cleanup phase of PVVP scenario sometimes causes server reboot. Following updates were made to prevent reboots: * better generic process termination procedure * ovsdb is terminated after vswitchd termination * vswitchd is terminated directly instead of parent sudo process * already running VNFs are terminated in case of failure during VNF start() Change-Id: Ic09d60d7bfdea01c84a2685ede3d0316f0d09be7 JIRA: VSPERF-271 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-05-03Merge "integration: Support of PVP and PVVP integration TCs"Maryam Tahhan2-58/+280
2016-04-27integration: Support of PVP and PVVP integration TCsMartin Klozik2-58/+280
Integration TC support has been enhanced to support PVP and PVVP scenarios. Definition of integration testcases have been modified to use a sort of macros for repetitive parts. Additional improvements were introduced: * instances of testcases are created only for testcases selected for execution * new TC definition options allow to define test specific vswitch, VNF, traffic generator and test options * tests filter applied on pattern specified by --tests allows to define negative filter only; In that case list of all tests is used as base for negative filter. * traffic values defined within teststep passed to send_traffic is merged with default values; This is essential for execution of TCs with linux_bridge or SRIOV support. It also simplifies integration TC definition * typos removed Change-Id: Icb734a7afd7e5154f27a8ff25615a39e01f58c27 JIRA: VSPERF-213 JIRA: VSPERF-216 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-04-25xena_port_ip: Add port ip assignment for Xena traffic generatorChristian Trautman2-0/+16
Adds port ip set options as part of conf files. Allows for IPv4 address assignment. Adds ipv6 options for later implementation when available in framework. * Adds Xena to documentation area where available traffic gens are listed. JIRA: VSPERF-273 Change-Id: Ia4129222ea95f1d399d5cc0c589c9a99d7b1b81a Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-14sriov: Support of SRIOV and Qemu PCI passthroughMartin Klozik2-9/+9
Generic support of SRIOV has been added. Virtual interfaces can be used in multiplei scenarios instead of physical NICs. Virtual functions can be directly accessed from VM by PCI passthrough method. Another option is to use VFs with vSwtich to evaluate impact on performance. Additonal modifications: * Automatic detection of NIC details has been added to simplify configuration. * Obsoleted configuration options have been removed. * Logging usage within vsperf script was fixed. * Vsperf main was refactored and final cleanup function added. * Configurable forwarding mode of TestPMD executed inside VM. JIRA: VSPERF-198 Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-04-12docs: rename scalability testMaryam Tahhan1-1/+1
Rename LTD.Scalability.RFC2544.0PacketLoss to LTD.Scalability.Flows.RFC2544.0PacketLoss to indicate what is being scaled. Change-Id: I398cbccf319fc09b621e7a68d7f81e4ff8d0b050 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-04-11docs: Fix param name test-param to test-paramsChristian Trautman1-1/+1
Repair of documentation and configuration files where test-params is incorrectly listed as test-param. JIRA: VSPERF-266 Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-08xena: Throughput method implementation for Xena NetworksChristian Trautman2-0/+19
Add files for Xena Networks 2544 throughput implementation. This allows for Xena to execute tput tests from VSPerf. For information on how this works please see the JIRA ticket. Modify traffic gen guide on install instructions for Xena. Add in scapy to requirements file. Modify conf file for Xena chassis connection information. * Added license info to __init__.py / baseconfig.x2544 * Set initial rate to 10% line rate for tput testing * Modified default mac address xena_json->set_header_layer2 from aa:aa:aa:aa:aa:aa to cc:cc:cc:cc:cc:cc * Removed obsolete multistream params * Added traffic params to 03_traffic.conf * Comments to explain try/catch for latency values * Removed unused import * Rebased to fix merge conflict * Added Xena to available traffic gen list in conf files JIRA: VSPERF-261 Change-Id: I3c4b4a332fd532e10b6096e9ed97a4a39d410839 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-07Configuration: Fix of default param in custom conf fileChristian Trautman1-1/+1
Fixing default param for packet sizes to be of correct parameter name. JIRA: VSPERF-260 Change-Id: Ie09cae6fa47d85f1a15e7da40325a48d3acd1518 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-03-21integration: Support of integration testcasesMartin Klozik1-0/+168
Generic support for integration testcases with first set of tests for vswitch testing. New test option "TestSteps" has been introduced to define test step by step directly in configuration file. In case that this concept will be accepted, there are plenty of possibilities for future improvements. For example: * use it also for performance tests without explicit call of validation methods * introduce step macros for repetitive scenarios, so new tests can be easily written * further generalization, which would go beyond usage of controllers and will operate directly with vswitch, vnf and trafficgen objects Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2 JIRA: VSPERF-212 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-16tunneling: Vanilla OVS decapsulation testsDino Simeon Madarang2-33/+34
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests Recent changes: * Line wrap * Fix GENEVE IP settings * Add GRE and GENEVE steps to integration.rst * Add DUT_NIC1_MAC and DUT_NIC2_MAC * Remove unnecessary call to vswitch.set_tunnel_arp * Move optional VXLAN/GRE/GENEVE decap settings to a different section * Add tunnel type to report files md and rst * Fix typo error: l4 to L4 in conf/integration/03_traffic.conf Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-11bugfix: Cleanup of traffic gen api and default traffic valuesMartin Klozik1-2/+3
Both documentation and traffic generator API are updated to match current code logic. Additional default values are added into TRAFFIC_DEFAULTS dictionary. Constructor of TestCase class uses default values from TRAFFIC_DEFAULTS instead of magic numbers. Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6 JIRA: VSPERF-253 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2016-03-08dpdk: enable vfio_pci supportMaryam Tahhan1-1/+7
Enable vfio_pci support for DPDK in the case where the end user doesn't want to use igb_uio. Changes: * Use generic functions to strip the path and .ko extension from the module to be inserted/removed. * Removed debug line in Modules_Manager. * Removed commented code. * Fixed all pylint issues. JIRA: VSPERF-249 Change-Id: I69c9077735879bcbf7ce5c970c1ec53c219e9f90 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2016-02-03pkt_gen: Add support for generating GENEVE framesDino Simeon Madarang1-0/+30
Add option to generate GENEVE frames for decapsulation tests. IxNet 7.3X does not have a native support of GENEVE protocol. The template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported into IxNET for this testcase to work. Recent changes: * Updated dependency * Updated userguide * Move inner frame variables & srcport/dstport to L4 Change-Id: I90f5fb256b51ae44bc1bc7983c599c9dbbffea08 JIRA: VSPERF-192 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Mark D. Gray <mark.d.gray@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03pkt_gen: Add IxNet support for GRE framesDino Simeon Madarang1-0/+23
Add option to generate GRE frames for testing GRE decapsulation tests. Recent changes: * Fix merge conflict * Updated userguides * Complete set of fields and working decap * Move GRE ixnet calls to if statement to reuse inner frame settings Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528 JIRA: VSPERF-191 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang4-0/+77
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang3-0/+93
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-25results: update test dashboard urlMaryam Tahhan1-1/+1
Update test dashboard url to http://testresults.opnfv.org/testapi. JIRA: VSPERF-112 Change-Id: I2402aaff846229c78fa1f4d3d9e409d931886b4f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Morgan Richomme <morgan.richomme@orange.com
2016-01-25bugfix: set default framerate/iload to 100%Martin Klozik1-3/+4
Continuous testcases should be executed with 100% of frame rate by default. Thus iLoad parameter of all continuous testcases was updated to the value of 100. Change-Id: Ia1c5a49c274d96a25ab7d9b8378ae7be6dc0b10c JIRA: VSPERF-189 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik1-1/+5
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21Add testpmd as vswitch classRobert Wojciechowicz1-0/+36
The purpose of using testpmd instead of OVS is to get the baseline of the DUT when performing hardware offloading operations. There are supported different checksum calculation and txq flags settings. Change-Id: I93c9b45dcb31eaa1f610b7e061f3dd5936b0e6ec JIRA: VSPERF-193 Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik1-0/+12
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-05conf: modify core mask formatCiara Loftus1-2/+3
The pmd-cpu-core mask flag does not accept a hexmask with a leading '0x'. Remove these characters from the VSWITCH_PMD_CPU_MASK variable. JIRA: VSPERF-139 Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-04bugfix: Vanilla OVS kernel module broken dependenciesMartin Klozik1-1/+1
Vsperf doesn't install OVS kernel module into standard directory, to keep host OS untouched. Thus kernel module must be inserted by insmod and module dependencies solved manually. List of kernel modules was updated to load all dependencies for recent OVS version. Change-Id: Id147615ca95cfbde26d1dc8d6c9801f7bb3b5d36 JIRA: VSPERF-161 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-23vnf: support of vloop_vnf VMMartin Klozik1-8/+8
Additional modifications are required to support vloop_vnf as a master VM image for PVP and PVVP deployments. Firewall is disabled directly by call of iptables to avoid dependency on distribution specific firewall handling. Default configuration values in 04_vnf.conf were set according to vloop_vnf to make its usage easy. Values are generic enough to work well also with other images. Parameters VANILLA_NICx_NAME and vanilla_nicx_name were renamed to GUEST_NICx_NAME and guest_nicx_name respectively, because they are used for all vswitch versions. Functionality of CLI options was fixed. Default values of GUEST_NICx_NAME were changed to work with vloop_vnf image. Bug with modification of TRAFFIC_DEFAULTS values has been fixed. Deep copy is used and l2 and l3 dictionaries are correctly updated to avoid issues. Qemu disc emulation has been set to SCSI again to avoid error messages related to non-functional DMA in syslog. Appropriate kernel modules were added into vloop_vnf to support scsi disk emulation during boot. Change-Id: I5901f454861f99d21cca03030d6d5468ab71a8af JIRA: VSPERF-133 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-14Results: Integrate with opnfv_test_dashboardRadek Zetik1-0/+2
The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name: example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" Additionally, there are two parameters with default values: OPNFV_URL = "http://213.77.62.197" Defines address of opnfv releng database server PACKAGE_LIST = "src/package-list.mk" OVS and DPDK tags are read from this file and values are used for creation of 'version' filed. The patch requires 'requests' module. The requirements.txt is updated. JIRA: VSPERF-112 Change-Id: I49f6f5058b1bce8a257669efa8229ff31879481d Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-14bugfix: Fix failure caused by unset localeMartin Klozik1-5/+14
In case, that VSPERF detects missing locale settings, it will set language and encodding settings to default values specified by configuration parameter DEFAULT_LOCALE. Localized external commands with output parsed by VSPERF are executed with modified locale to ensure correct VSPERF function. Locale settings for such commands is specified by configuration parameter DEFAULT_CMD_LOCALE. Change-Id: If5c15115b778ce90046e390f10438b780f82695b JIRA: VSPERF-132 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-09testcase: scalability testcase enhancementsMartin Klozik1-0/+12
Streams used by scalability testcases can be simulated at different network layers by modification of destination MAC address (L2), destination IP address (L3) or destination UDP port (L4). It is possible to define number and type of the streams by testcase definition by options "MultiStream" and "Stream Type" or by CLI parameters "multistream" and "stream_type". CLI options override testcase definition. Number of streams, their types, used transport protocol and indication of pre-installed flows are written to both result CSV file and MD file with test report. Default transport protocol was changed to UDP because IxNetwork configuration script doesn't support TCP yet. Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1 JIRA: VSPERF-81 JIRA: VSPERF-82 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-08Results: Integrate with opnfv_test_dashboardRadek Zetik1-0/+2
All the test projects generate results in different format. The goal of a testing dashboard is to provide a consistent view of the different tests from the different projects. We need to enable the data collection for VSPERF, in other words VSPERF pushes data using a REST API. The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name. Example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" JIRA: VSPERF-112 Change-Id: I37255414eebcc2ff0c12109c508dcd984663a830 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-02vnfs: configurable loopback application support inside VMMartin Klozik2-4/+19
For PVP and PVVP deployments, traffic inside virtual machines must be forwarded between its interfaces. There are several forwarding options supported by VSPERF, including DPDK testpmd, Huawei l2fwd kernel module and linux bridge. Another option is, that VM image has built in forwarding functionality and vsperf doesn't configure it itself. User can select VM loopback application by configuration option GUEST_LOOPBACK (per VM) or by SCALAR cli option guest_loopback (global settings). Selected guest loopback application(s) will be written into test results CSV file and test report MD file. Default wildcarded guest login prompt was added. Guest startup guarding timer can be configured. Path to OVS kernel module has been fixed. Change-Id: If738da1ea09112f9cf2267afcbc99a6797f3a03a JIRA: VSPERF-130 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-11pkt_gen: update testcenter implementationMaryam Tahhan2-55/+112
Update testcenter implementation to move settings to generic settings file and change windows line endings. JIRA: VSPERF-126 Change-Id: I156005f261bc0df6c3d8009db72ba2d5991c6166 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com>
2015-11-10conf: change default RTE_TARGETMaryam Tahhan1-1/+1
Change RTE_TARGET to build native instead of ivshmem. Change-Id: I3707d1f4bf545c4a2a35e85816f26dbd214a72de Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com>