summaryrefslogtreecommitdiffstats
path: root/conf/integration
AgeCommit message (Collapse)AuthorFilesLines
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-24/+56
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-12-07conf:Traffic-type naming convention and consistencySridhar K. N. Rao1-39/+39
Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik2-7/+15
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-10-20ci: Enhance verify and merge jobsMartin Klozik1-0/+30
Verify and merge jobs will execute real vsperf TCs, which won't require neither physical NICs nor traffic generator. Script ./build-vsperf.sh will take care about creation, update and activation of python virtual environment. It will also install required system packages at nodes running merge and verify jobs. Additional improvements: * set of simple sanity checks was added * two new integration TCs were added; However test with VNF is not used now, because it requires a VM image. * detailed logs are shown in case of failure JIRA: VSPERF-391 Change-Id: I33e75e762fdc62656de92dc34f0ad7a484623603 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
2016-10-11Merge "integration: Test vHost User numa awareness"Martin Klozik1-0/+73
2016-10-05integration: Test vHost User numa awarenessMartin Klozik1-0/+73
Open vSwitch with DPDK can optimize memory usage in case of NUMA architecture to avoid unnecessary memory access across NUMA slots. In a nutshell, PMD threads serving virtual NICs are co-located at the same NUMA slot as QEMU instance, which is using these NICs. This patch adds new (functional) integration testcase, which verifies OVS vHost User numa awareness feature. Step driven test objects were updated to allow a call of OS utilies and evaluation of conditions. Also the documentation was updated with the list of supported test objects and their methods. JIRA: VSPERF-377 Change-Id: I184e71e066d27b5b9fc9e6a9f7e240e2d1b5a0fa Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-09-07Integration Test: 4 serial VMs testcases.Antonio Fischetti1-0/+139
Implementation of RFC2544 throughput/back2back and continuous testcases with 4 serial VMs. Topology is: Phy1-VM0-VM1-VM2-VM3-Phy2. This patch requires Patch VSPERF-326 "Integration test implementation: Multi-PVP with explicit Flows". v2: rebased to master to fix conflicts. JIRA: VSPERF-364 Change-Id: Ib731bf6dc4634d6347b1c521bb82326db90a6c63 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-08-16Integration Test: Multi-VM with parallel PVP connections.Antonio Fischetti1-3/+221
Implementation of 3 testcases with multi-VMs in parallel. Flows are explicitly set on UDP destination ports so that each packet is sent to a specific VM. Topology is: Phy1-VM1-Phy2, Phy1-VM2-Phy2,.. This patch requires change #16855 "ovs/ofctl: Fix validation method for complex flows." JIRA: VSPERF-326 Change-Id: I59d23354bc9c6db470a59faba13bdcd6f2beb19d Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-08-16integration: Support for VxLAN TC without using overlay traffic gen.Sugesh Chandran2-0/+23
The test case for verifying the vxlan tunneling feature without using any ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and generate tunnel traffic in the deployment. The packet flow in the test case is as follows TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT ENCAP-PKT - Encapsulate the ingress packet to a tunnel type. MOD-PKT - Modify the tunnel header to match the following decap interface. DECAP-PKT - Decapsulate the newly generated tunneled packet. Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54 Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
2016-07-18conf/integration: Fix typo on Integration testcase example.Antonio Fischetti1-1/+1
This patch fixes a typo in the integration testcase example, otherwise settings like {"guest_loopback" : "linux_bridge"} are ignored. JIRA: ONP-6635 Change-Id: Iab61d36e70f96f4a6c1f98a506753dc7fa090140 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-05-04bidirectional value: Fix inconsistency for bidir paramChristian Trautman1-20/+20
Fixes bi-directional param and enforces string type in testcase configuration. Modifies all instance where bi directional value is used to string. * Changes documentation to specify value type as needed * Changes traffic defaults to use string for bidir value * Fixes testcases configuration files to use bidir as str * Change testcase conf documentation to note enforcement of string type * Sets bidir to title format to keep consitency in traffic profile when passed to traffic generators * Fix pvp/pvvp check for bidir value * Raise exception if testcase configuration is not set as str for bidir value * Change Xena bi-dir check to string compare instead of typecasting to boolean to compare. JIRA: VSPERF-282 Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-27integration: Support of PVP and PVVP integration TCsMartin Klozik1-58/+262
Integration TC support has been enhanced to support PVP and PVVP scenarios. Definition of integration testcases have been modified to use a sort of macros for repetitive parts. Additional improvements were introduced: * instances of testcases are created only for testcases selected for execution * new TC definition options allow to define test specific vswitch, VNF, traffic generator and test options * tests filter applied on pattern specified by --tests allows to define negative filter only; In that case list of all tests is used as base for negative filter. * traffic values defined within teststep passed to send_traffic is merged with default values; This is essential for execution of TCs with linux_bridge or SRIOV support. It also simplifies integration TC definition * typos removed Change-Id: Icb734a7afd7e5154f27a8ff25615a39e01f58c27 JIRA: VSPERF-213 JIRA: VSPERF-216 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-21integration: Support of integration testcasesMartin Klozik1-0/+168
Generic support for integration testcases with first set of tests for vswitch testing. New test option "TestSteps" has been introduced to define test step by step directly in configuration file. In case that this concept will be accepted, there are plenty of possibilities for future improvements. For example: * use it also for performance tests without explicit call of validation methods * introduce step macros for repetitive scenarios, so new tests can be easily written * further generalization, which would go beyond usage of controllers and will operate directly with vswitch, vnf and trafficgen objects Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2 JIRA: VSPERF-212 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-16tunneling: Vanilla OVS decapsulation testsDino Simeon Madarang2-33/+34
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests Recent changes: * Line wrap * Fix GENEVE IP settings * Add GRE and GENEVE steps to integration.rst * Add DUT_NIC1_MAC and DUT_NIC2_MAC * Remove unnecessary call to vswitch.set_tunnel_arp * Move optional VXLAN/GRE/GENEVE decap settings to a different section * Add tunnel type to report files md and rst * Fix typo error: l4 to L4 in conf/integration/03_traffic.conf Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03pkt_gen: Add support for generating GENEVE framesDino Simeon Madarang1-0/+30
Add option to generate GENEVE frames for decapsulation tests. IxNet 7.3X does not have a native support of GENEVE protocol. The template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported into IxNET for this testcase to work. Recent changes: * Updated dependency * Updated userguide * Move inner frame variables & srcport/dstport to L4 Change-Id: I90f5fb256b51ae44bc1bc7983c599c9dbbffea08 JIRA: VSPERF-192 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Mark D. Gray <mark.d.gray@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03pkt_gen: Add IxNet support for GRE framesDino Simeon Madarang1-0/+23
Add option to generate GRE frames for testing GRE decapsulation tests. Recent changes: * Fix merge conflict * Updated userguides * Complete set of fields and working decap * Move GRE ixnet calls to if statement to reuse inner frame settings Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528 JIRA: VSPERF-191 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang3-0/+75
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang3-0/+93
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>