summaryrefslogtreecommitdiffstats
path: root/conf/01_testcases.conf
AgeCommit message (Collapse)AuthorFilesLines
2015-09-29Sysmetrics implementation updateMartin Klozik1-11/+0
New sysmetrics implementation is based on pidstat command line tool from sysstat package. Old non-functional implementation was removed. Reporting was refactored to generate report after each TC from values already available in memory. Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/05_collector.conf deleted: core/collector_controller.py modified: core/component_factory.py modified: docs/NEWS.rst modified: packages.txt modified: requirements.txt modified: testcases/testcase.py modified: tools/collectors/collector/collector.py modified: tools/collectors/sysmetrics/__init__.py deleted: tools/collectors/sysmetrics/linuxmetrics.py new file: tools/collectors/sysmetrics/pidstat.py modified: tools/report/report.jinja modified: tools/report/report.py modified: tools/systeminfo.py modified: vsperf JIRA: VSPERF-67 Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-09-24Frame Modification: support remaining frame modification types.Billy O'Mahony1-0/+3
Only works for P2P. Other deployment scenarios will need to implement the same kind of multi-table flow as P2P to enable frame modification. Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com> Change-Id: I2fa35972b90b165c00f0d0a7515fa275d0f17aa4
2015-08-26Support of configurable background load and implementation of ↵Martin Klozik1-3/+63
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss Every testcase can be configured to run background load on the DUT. Load is generated by chosen command line tool, which must be installed according to the installation.md. Currently 'stress' and 'stress-ng' tools are supported, but support for new tool can be easily added. Load can be configured by testcase configuration option 'load'. Details about supported load generator options can be found in conf/01_testcases.conf. JIRA: VSPERF-23 JIRA: VSPERF-24 Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-08-18vnfs: Enable PVP using vhost-userDino Simeon Madarang1-1/+16
Enable booting of a VM with DPDK and run testpmd for PVP testing. * Added throughput and back2back tests with pvp deployment scenario in 01_testcases.conf * PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0 * Tested on CentOS7 and Fedora 20 * Fix conflict with change 1078 Recent Changes: * Fix merge conflict (testcase.py and testcases.conf) * Remove QEMU_DIR. User must set QEMU_BIN * Set bidir traffic to True * Add flow for bi-directional traffic * Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d * Merge change 1096 (src: Add QEMU makefile) * Set virtio-net-pci csum=off and other variables to off * Move hardcoded values to conf/* JIRA: VSPERF-56 Change-Id: I4ad184531064855493483d9833a7722c9f7d3576 Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Signed-off-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2015-08-13Add new testcase for LTD.Scalability.RFC2544.0PacketLossMartin Klozik1-0/+11
This test adds a multistream config item, taking the required number of flows to setup in the traffic, to the existing testcase and then running the standard 2544 Throughput test. The config is plumbed through from the 01_testcase.conf via ITraffic to the IxNet. 01_testcase.conf contains new parameter MultiStream for 2544 Throughput test. JIRA: VSPERF-19 Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-08-04Add a simple performance test that sends a continuous streamRadek Zetik1-0/+9
Implement a simple performance test that sends a continuous stream of traffic to the vSwitch at line rate for 30 seconds and measures the throughput Note: there is issue with calculating of the Tx Fps and Mbps based on the results from the IxNetwork traffic generator. This issue will be fixed in a later patch. JIRA: VSPERF-27 Change-Id: Ic72225888735d33398a602462af159e901fb5957 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-07-27testcase: Add frame modification configBilly O'Mahony1-2/+11
* Added a new standard set of flow table that defaults to routing phy1 to phy2 and vice-versa and allows frame modification and tuple matches to be added independently of routing. * Add a FrameMod testcase attribute - implement this for value 'vlan' * With FrameMod == 'vlan' the reported tx_fps and rx_fps figures do not match even for RFC2544 throughtput 0% packet loss - this is a pre-existing bug and a fix will be done as a separate patch. The rx_fps figure is the reliable figure. JIRA: VSPERF-27 Change-Id: Idd137b7a101305e7aebb6fabdfb6a7a4dcf8661b Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-07-17Add new biDirectional parameter for particular testcaseRadek Zetik1-0/+2
This change introduces new parameter which sets the communication between ports either uni-directional or bi-directional. JIRA: VSPERF-27 Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
2015-07-07Port RFC2544.BackToBackFrames test to vsperfDino Simeon Madarang1-0/+7
Add RFC2544.BackToBackFrames test and fix pylint errors. Remove irrelevant values of back to back test results. JIRA: VSPERF-46 Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Martin Klozik<martinx.klozik@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony1-0/+40
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>