aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-03-16Merge "pylint: Add pylint into requirements.txt"Martin Klozik13-24/+5
2018-03-16Merge "trex: Tests with T-Rex in VM"Martin Klozik12-4/+230
2018-03-12pylint: Add pylint into requirements.txtMartin Klozik13-24/+5
Pylint installation was part of vsperf installation scripts, which is not following vsperf generic approach to add all required python packages into requirements.txt. It also means, that the same version of pylint is used for verification of all patches at given server. This is causing issues in case, that different versions of pylint are required to verify vsperf code, e.g. older version might be required to verify patches of previous OPNFV release. Pylint with exact version number was added into requirements.txt, so correct version of pylint is used for verification of vspef code. JIRA: VSPERF-563 Change-Id: I48c9cacd87f016e6047ed965728d3b8d63e6461f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-03-12trex: Tests with T-Rex in VMMartin Klozik12-4/+230
Patch introduces a set of testcases with T-Rex running inside VM. JIRA: VSPERF-560 Change-Id: I5b0a0220a2d72428ae1210ee9590d39abdfb9c1d Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: RadoslawX Glombiowski <radoslawx.glombiowski@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-03-07ci: Fix typo in MERGE job definitionMartin Klozik1-1/+1
Fix of the typo in the name of pylint check function. Change-Id: Ie67c95715bd3fda76b2ae47ac8bb48807ffc58c5 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-02-28Xena_Doc_mono_install_update: Update mono install pointerChristian Trautman1-1/+1
Mono Version 5.10 breaks mono execution of Xena2544.exe. Fix Xena install notes to point to a working version of Mono(5.8) when setting up to use Xena2544.exe. JIRA:VSPERF-561 Change-Id: I3bbfaaeef55fc465cba943eb8b1a31abe2faba1f Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2018-02-26Merge "Trex_speed_improvement: Add logic for dealing with high speed cards"Martin Klozik4-4/+81
2018-02-23Trex_speed_improvement: Add logic for dealing with high speed cardsChristian Trautman4-4/+81
Adds configuration options and logic to detect maximum supported speed of T-Rex server side cards. 1. Adds logic to pull maximum supported speed from port info 2. Adds forcable option to have user specify maximum speed 3. If logic cannot detect speed from port_info because it is not available or the forcable option is not set it will assume 10G speeds. 4. Tested on Intel XXV25G and Mellanox ConnectX-5 cards 5. Added packet structure logging to show packet info for better debugging capabilities 6. Adds core mask to take advantage of multiple cores if server is started with more than default number of cores 7. Adds packets lost logging to RFC2544 Throughput testing JIRA: VSPERF-559 Change-Id: I7fcfda7ccc408c30830950ee3668e01b8624c20a Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2018-02-22Merge "LTD: Expand requirements of Soak/Long Duration Tests"Martin Klozik1-18/+90
2018-02-13Merge "loadgen: Support for Stressor-VMs as a Loadgen"Martin Klozik4-3/+152
2018-02-06python34_update: Updated build scripts for Centos and RHEL to python34Christian Trautman7-46/+42
Recent patch update to collectd requires new packages that must have python34 as a minimum version available. This updates the build scripts for Centos and RHEL to use scl enabled python34. 1. Adds needed packages to build correctly for Centos and RHEL 2. Changes repo location to pull scl enabled python34 3. Modifies enablement of scl to new package string 4. Updates documentation to reflect change JIRA: VSPERF-558 Change-Id: I52257ecfc6abc2112c30137c1de3ced272f21066 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2018-01-31collector: Support for collectd as one of the collectors.Sridhar K. N. Rao5-1/+1079
The changes include: 1. Configuration in 05_collector.conf. User can specify the metrics that are of their interest and also fine tune the same. 2. collectd_bucky.py: This is derived from python_bucky library. Formal approval for reuse is obtained. 3. collectd.py: This is the main file that receives the samples, stores the required ones, plots the values and saves the values in a data-file in results folder. 4. Fixed some pylint errors 5. Added required libraries to requirements.txt. hashlib is supported by default. However, matplotlib and numpy required 6. added __init__.py to overcome import errors. 7. Crypto needs pycrypto module 8. Builtin filter function usage return bad-builtin pylint warning. Rewrite to remove filter function. 9. Added support for reporting the ovs processes statistics. 10. Import order corrected according to pylint 11. Fixed copyright issues, removed python-3 checking, enhance to include VPP and qemu processes. 12. Removed pylint disables. 13. Added documentaion to describe sample information 14. Added @staticmethod to remove disable-no-self-use. 15. Fixed year in Copyright. 16. Updated print_results function to print the process values. 17. Removed example values form INTELRDT_XKEYS in conf file 18. Removed use of len(SEQUENCE) in loop and renamed data to pdata to avoid name clashes 19. Fixed issue with requirements.txt Note: A separate documentation covering all external tools will be provided. JIRA: VSPERF-505 Change-Id: Ieedcbe7b92e8933263d34df12b1e24be8447b524 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2018-01-29LTD: Expand requirements of Soak/Long Duration TestsAl Morton1-18/+90
In Project discussion on Jan 17, 2018 including review of RFC 8204, we identified the following five areas to improve the Soak tests. See the JIRA ticket for details. JIRA: VSPERF-557 Change-Id: I5314c283a383c57d99863fcf7262c4f28e1c12a8 Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-01-29Merge "llc-management: Support for LLC management with RMD"Martin Klozik5-1/+292
2018-01-22bugfix: Define _EXECUTED_PIDS in config fileMartin Klozik2-5/+5
Add definition of internal _EXECUTED_PIDS list into generic configuration file. JIRA: VSPERF-556 Change-Id: I6c237cb563c0a37bf806561d1f841587796399b8 Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2018-01-21llc-management: Support for LLC management with RMDSridhar K. N. Rao5-1/+292
This patch adds support for LLC-Last level cache management using RMD. The changes include: 1. 08_llcmanagement.conf: The configuration file to define cache allocation policy. 2. testcase.py: To trigger llc-allocation and cleanup before and after the test, respectively. 3. llc_management/rmd.py: The main file the performs the llc allocation and cleanup. 4. llc_management/resthttp.py: Generic utility to call rest APIs, with http. 5. Fixed a build error due to change in name mismatch. 6. Fixed pylint errors. Override built-in function error. 7. Added empty __init__.py to avoid import errors 8. Fixed deprecated functions errors 9. Fixed copyright issues, removed python-3 checking. 10. Removed pylint disables. 11. resthttp.py is already part of stcrestclient used in tools/pkt_gen/testcenter/ scripts. Hence, deleted from the source. 12. Year update from the license 13. Fixed some testcases.py collision issue JIRA: VSPERF-544 Change-Id: I7cbd155dd66f5a0cef544751841e71b95c9b6821 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2018-01-21loadgen: Support for Stressor-VMs as a LoadgenSridhar K. N. Rao4-3/+152
This patch adds support for stressor-VMs as a loadgen in VSPERF. The changes include: 1. 07_loadgen.conf: User can specify the stressor-VM specific configuration. It includes, image-name, path, nics, memory, etc. 2. loadgen/stressorvm/stressor_vm.py: This file implement ILoadGenerator interface. It implements all the necessary APIs for starting and stopping the loads. 3. Fixed Pylint Error 4. Removed the network device configuration from qemu-system-x86_64 command as stessor-vm mostly focus on CPU and memory stressing. 5. Moved the creation of loadgen after the VNFs are setup in testcase.py. 6. Fixed copyright issues. 7. Removed python-3 checking. Improved exception handling 8. Set Default loadgen as DummyLoadGen 9. Improved OSError Printing with directory name and error 10. Update the year in license. 2017-2018. JIRA: VSPERF-504 Change-Id: Iad6c0780c184f8e36eddcbcae2a580f41118e8dc Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2018-01-19Merge "documentation: Traffic Capture methods"Martin Klozik2-0/+298
2018-01-19Merge "trex: Improve error handling"Martin Klozik2-3/+12
2018-01-18trex: Improve error handlingMartin Klozik2-3/+12
Print an error message in case, that vsperf is not able to connect to the T-Rex server. User is instructed to check if T-Rex server is up and running. Change-Id: I70c6d27fa8331921d43e25c5eaa3638ded6c015b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Jose Lausuch <jalausuch@suse.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-18ixia: Add support of LISTs in TRAFFICMartin Klozik2-0/+16
The control script for Ixia (i.e. Ixia and IxNet classes) is written in TCL and thus VSPERF must translate TRAFFIC dictionary into TCL notation. The method for data type conversion was updated to correctly process new 'capture' settings, which uses python lists for tx and rx capture ports definition. JIRA: VSPERF-556 Change-Id: I639942b11ea11ce1b443a2a2e99c3da6619ba569 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-01-18documentation: Traffic Capture methodsRichard Elias2-0/+298
Created new chapter on Traffic Capture and added short descriptions and explanation for each of the three methods currently supported by VSPERF. Subchapters include Traffic Capture in the VM, Traffic for testing NICs with Hardware acceleration and Traffic Capture on the Trraffic Generator. JIRA: VSPERF-556 Change-Id: I280c54aa73961e0bbb61b40e8fe476bd3e92ff7d Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-12trex: Add support for traffic captureMartin Klozik6-11/+155
A support of traffic capture was added into T-Rex. It allows to write a functional tests, which will verify proper vSwitch functionality by inspection of packets received by T-Rex. A testcase example was added into integration testcases. JIRA: VSPERF-556 Change-Id: I5ad28479ca2ec29760b68f24510af1a6d74866ae Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-01-11capture: Traffic capture examplesMartin Klozik6-4/+187
Traffic can be captured also at DUT side. Two options are supported by vsperf: 1) Traffic is captured inside VM after it has been processed by vSwitch. This can be used for verification of vSwitch frame modification functionality, including HW offloading at ingress side. 2) Another NIC under the test (NIC2) is added into standard VSPERF DUT setup. Traffic is then forwarded from TGen through NIC and vSwitch to NIC2 and then over patch cable back to NIC2, the vSwitch, NIC and to the traffic generator. This setup supports also verification of HW offloading at egress side of NIC2 and thus it can be used for validation of smart NICS. Both options above are traffic generator agnostic if compared to direct support of traffic capture by traffic generator. This patch introduces example testcases for both options. Detailed documentation will be pushed as a standalone patch. JIRA: VSPERF-556 Change-Id: I23e12e45768ae4dbe9442f74d8391c3d5b2c7895 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-05vswitch: Improve add_phy_port error messagesMartin Klozik4-7/+9
In case that vSwitch can't add required number of physical ports, then error message should be printed. Previous implementation was not consistent. Thus error handling has been united across all vswitches and message explicitly states the cause of the failure. NOTE: A better solution would be a refactoring of all vSwitch classes to follow VPP port handling and to move port related structures and physical port check into parent vswitch class. JIRA: VSPERF-555 Change-Id: Id09a61432ea93e261f563254829348ac61f5dc8a Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Jose Lausuch <jalausuch@suse.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2018-01-04Merge "trafficgen: Postponed call of connect()"Martin Klozik1-1/+6
2018-01-04Merge "documentation: Installation prerequisites"Martin Klozik1-8/+15
2018-01-03documentation: Installation prerequisitesRichard Elias1-8/+15
Added a mention of the default Python3 location used by virtualenv creation script after Python3 enforcement patch(/usr/bin/python3). Also added a paragraph warning of held-back kernel package version and DNF/APT/YUM configuration preventing modification of kernel packages. JIRA: MSP-10754 Change-Id: I1ba630cf85af4d99cc2cbed40163a9137b95c390 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ian Stokes <ian.stokes@intel.com>
2017-12-22Merge "Trex_2544_verification: Add verification functionality to Trex code"Martin Klozik4-40/+118
2017-12-19Trex_2544_verification: Add verification functionality to Trex codeChristian Trautman4-40/+118
- Adds T-Rex verification step as implemented by other trafficgens - Adds check in rfc2544 loop for if no packets are received to fail test immediately - Refactors the trial code to support the verification option - Adds trial_run function - Removed unused line speed configuration setting JIRA: VSPERF-553 Change-Id: Ie324fe8fb6bf79fe0dc337b91af2bf83e901a8ab Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-19trafficgen: Postponed call of connect()Martin Klozik1-1/+6
In order to support execution of SW traffic generator inside VM, we have to postpone the call of connect() method from traffic controller. Currently it is called during initialization phase, when VMs are not active and thus connect() would always fail. This patch moves the call of connect() inside configure() method, which is called later when VMs are up and running. This modification allows to configure VM to VM scenario, where 1st VM is running a loopback application and 2nd one executes one of supported SW traffic generators, i.e. T-Rex or MoonGen. Change-Id: Ifeb659aadaa2e1cd5975564965e1719c1e72a12e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-18Add support for SLES 15Jose Lausuch3-0/+118
Change-Id: I555fea7514475153ae74b6f3d2ab2df1c30bb1aa Signed-off-by: Jose Lausuch <jalausuch@suse.com>
2017-12-14rhel_path_fix: Fix pathing issue introduce by other commitChristian Trautman2-2/+2
Fixes pathing issue with virtual environment creation caused by commit 21b23522861e364daf150cd997c5d60851847ef2 Change-Id: Ia2c0c44da898e40e122571e477301343d047f974 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-14Merge "teststeps: Improvements of step driven TC"Martin Klozik3-6/+33
2017-12-13Add support for openSuse TumbleweedJose Lausuch3-0/+124
This patch aims at adding support for Tumbleweed, which is a rolling release. That means that the VERSION_ID is not fixed and can't be mapped to a directory e.g - VERSION_ID="20171120" - VERSION_ID="20171121" Change-Id: I99c9a4f1042c22b73879e954147c54c87b6a8b21 Signed-off-by: Jose Lausuch <jalausuch@suse.com>
2017-12-13Merge "trex_learning: Add learning packet option to T-Rex testing"Martin Klozik4-2/+35
2017-12-13trex_learning: Add learning packet option to T-Rex testingChristian Trautman4-2/+35
Adds packet learning option which is available on other Traffic generators as a feature. This adds this feature to the Trex implementation inside of VSPerf. JIRA: VSPERF-547 Change-Id: Iaf4d0721b22eb780c25e29295c112d4fcb47b22c Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-12teststeps: Improvements of step driven TCMartin Klozik3-6/+33
This patch adds support of access to VMs deployed automatically by deployment scenario (e.g. pvp, pvvp4, etc.). It also modifies filter for checking output of executed commands to correctly handle different end of line encodings (i.e. \n vs. \n\r). JIRA: VSPERF-539 Change-Id: Ifc796d992b90e316bad5853aaefce79e439e294d Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-07install: Python virtualenv python3 enforcementRichard Elias9-13/+13
It was reported that virtualenv-3.x sometimes uses python2.7 instead of python3. This update of the python virtual environment creation scripts, enforces the use of python3 from /usr/bin/python3. The scripts were tested on fresh installations of each currently supported Linux OS. JIRA:VSPERF-551 Change-Id: If909dd9578a3c42b14c1a3e4f9ed7b07a675fb58 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-12-01tools: Update versions of toolsMartin Klozik2-4/+10
Default versions of DPDK, OVS, VPP and QEMU have been updated. VPP socket file configuration is mandatory for VPP 17.10. Change-Id: I3465161ae9ba9b50dfd90bb19d84f128c72d44ea Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-11-28ovs_vanilla: Fix vswitch shutdown processMartin Klozik1-1/+6
Datapath must be removed before vswitch termination. JIRA: VSPERF-548 Change-Id: I7408ddc1b21e2bc02a44785dca07d9c026bc28c1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-22Merge "trex_stat_packet_counts: Add packet counts to trex reporting"Martin Klozik1-0/+4
2017-11-21Merge "sriov: Determine path to the bind-tool"Martin Klozik1-0/+3
2017-11-21Merge "regression: OVS/DPDK regression tests"Martin Klozik4-0/+9134
2017-11-21sriov: Determine path to the bind-toolMartin Klozik1-0/+3
In case of SRIOV path to the bind-tool must be known before NIC driver is re-initialized. It means before TestCase.__init__() is called. Change-Id: Ib6fdba233e665144510dd492462c0a21aa19ed71 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20trex_stat_packet_counts: Add packet counts to trex reportingChristian Trautman1-0/+4
Adds packet count totals for transmit and receive to reporting at the end of test execution. JIRA: VSPERF-546 Change-Id: I51027fae109d0ea794c0db03f5781ddb2fcbb941 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-11-20install: Fedora installation script updateRichard Elias4-0/+109
An update of the Fedora installation scripts for versions 24,25 and 26. Change-Id: Ib510d78f4040e1029bc68d2fa303a4c0a6357de3 Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20regression: OVS/DPDK regression testsMartin Klozik4-0/+9134
A set of regression tests for verification of OVS/DPDK features was introduced. Following features are tested: * DPDK NIC Support * DPDK Hotplug Support * RX Checksum Support * Flow Control Support * Multiqueue Support * Vhost User * Virtual Devices Support * NUMA Support * Jumbo Frame Support * Rate Limiting * Quality of Service JIRA: VSPERF-539 Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20ci: Skip VPP tests if neededMartin Klozik2-0/+26
If VPP can't be executed properly, then VPP tests will be skipped for VERIFY and MERGE jobs. It sometimes happens, that VPP can't be executed at builders used for VERIFY & MERGE jobs execution. These failures are not caused by patches themselves, but they are blocking standard review & merge process. Thus VPP tests will be suppressed in case that VPP can't be started at all. This change is not related to DAILY job, which is executed at POD dedicated to VSPERF project. It means that VPP tests are always executed by DAILY job. Change-Id: I4752601561b94a82482c403305bc3f24779f538b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-20Merge "paths: Modify algorithm for PATHS verification"Martin Klozik4-16/+33