aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-02-05fuel-plugin: Remove use of plugin-defined roleBilly O'Mahony2-23/+8
The use of a fuel plugin-defined role not working since rebase to Fuel8 so work around this by removing dependecy on this feature for imminent Rel/B. Change-Id: Icd1ee1c8f05a1c26e8da7f80d2d7206374099a93 Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Michal Skalski <mskalski@mirantis.com> Reviewed-by: Jonas Bjurel <jonas.bjurel@ericsson.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Mark D. Gray <mark.d.gray@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03pkt_gen: Add support for generating GENEVE framesDino Simeon Madarang4-2/+233
Add option to generate GENEVE frames for decapsulation tests. IxNet 7.3X does not have a native support of GENEVE protocol. The template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported into IxNET for this testcase to work. Recent changes: * Updated dependency * Updated userguide * Move inner frame variables & srcport/dstport to L4 Change-Id: I90f5fb256b51ae44bc1bc7983c599c9dbbffea08 JIRA: VSPERF-192 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Mark D. Gray <mark.d.gray@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03pkt_gen: Add IxNet support for GRE framesDino Simeon Madarang5-124/+451
Add option to generate GRE frames for testing GRE decapsulation tests. Recent changes: * Fix merge conflict * Updated userguides * Complete set of fields and working decap * Move GRE ixnet calls to if statement to reuse inner frame settings Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528 JIRA: VSPERF-191 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang17-34/+3532
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang15-21/+528
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-28docs: Add a note on pidstat and unknown results.Maryam Tahhan1-2/+8
Add a Note on why %CPU and %USER > 100%, as well as a note regarding the "unkown" results. Change-Id: I7e173c91a549932301645c9344648c9b73da4a70 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-01-28docs: Final report conclusions and recommendationsMaryam Tahhan3-7/+12
Remove TODO sections from the Release B report. Change-Id: I4520c23ad9cbb980c9f1c1ee14cc7e91060933a4 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-01-28bugfix: do not report DPDK version for vanilla OVS vswitchMartin Klozik3-1/+7
DPDK version check has been removed in case that OVS does not use DPDK. Change-Id: I78560a72e4fde3d7113165d88eb81d80f6399af8 JIRA: VSPERF-209 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-28docs: traffic generator integration guideMartin Klozik2-0/+201
Simple guide with description of integration of new traffic generator into the VSPERF. Change-Id: Iab84d1356dbf3ef3405817606c094ffe31355b9f JIRA: VSPERF-174 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2016-01-26src: dpdk and ovs version update.Maryam Tahhan1-2/+2
Update vsperf to use DPDK 2.2 and the OVS patch that enables DPDK 2.2 support. Change-Id: Ibe9702b2934bc87fbcd91b941ae31a7295a65f4f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Ian Stokes <ian.stokes@intel.com> Reviewed-by: Antonio Fischetti<antonio.fischetti@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-25results: update test dashboard urlMaryam Tahhan1-1/+1
Update test dashboard url to http://testresults.opnfv.org/testapi. JIRA: VSPERF-112 Change-Id: I2402aaff846229c78fa1f4d3d9e409d931886b4f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Morgan Richomme <morgan.richomme@orange.com
2016-01-25docs: updates and final fixesMaryam Tahhan8-49/+115
Migrate the installation guide for vsperf to a configguide directory, update the links to the installation guide. Re-add top level index.rst and remove the all directory. Update release documentation with vsperf Rel B support. Change-Id: Ib643b9d3581d8109b85c377027c8cc6be4b797fc Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-25VSPERF docs: Patches for Design DocumentRadek Zetik1-2/+11
Routing Table Figure has an odd description for the table#1 description. Connectivity to the DUT is assumed, could provide example directions. Suggest a new section. JIRA: VSPERF-178 JIRA: VSPERF-179 Change-Id: I38e48034a9029d4a8969affdddef5b281dc8eba3 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2016-01-25report: create test report for all executed TCsMartin Klozik5-113/+133
Every testcase generates report with its results into separate file. It is required to merge all partial reports into final overall report for whole set of TCs executed by VSPERF. Hugepages are mounted also for TestPMD packet forwarder. Change-Id: Iaa1ab4e08d1637106da804e06b7f30100d609cd6 JIRA: VSPERF-181 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-25VSPERF docs: Review userguide docs for BrahmaputraRadek Zetik1-36/+15
Since 'make' builds all three OVS variants, WITH_LINUX and VHOST_USER are not used anymore on cli. The fix removes them from quickstart.rst JIRA: VSPERF-177 Change-Id: I7efe49f638f1234da0d84c5eb62624f543134efc Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> >
2016-01-25docs: update links in LTD and doc versioningMaryam Tahhan1-6/+12
JIRA: VSPERF-60 Change-Id: I2c04faa13a2182e3e28619d23ec68ac52c7a7be9 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2016-01-25docs: fix links in the quickstart guide.Maryam Tahhan1-3/+15
Fix installation and Traffic gen guide links in http://artifacts.opnfv.org/vswitchperf/docs/userguides/quickstart.html to http://artifacts.opnfv.org/vswitchperf/docs/userguides/installation.html and http://artifacts.opnfv.org/vswitchperf/docs/userguides/trafficgen.html. Also added where vloop_vnf can be downloaded from. JIRA: VSPERF-186 Change-Id: I585367b1c717fdbb0b56b7f0312fe9c70f51594f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
2016-01-25bugfix: set default framerate/iload to 100%Martin Klozik1-3/+4
Continuous testcases should be executed with 100% of frame rate by default. Thus iLoad parameter of all continuous testcases was updated to the value of 100. Change-Id: Ia1c5a49c274d96a25ab7d9b8378ae7be6dc0b10c JIRA: VSPERF-189 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-22report: add rst template for results reportingMartin Klozik4-21/+224
Add a template that can be used for reporting vsperf release B results. This patch also fixes the line length issues in the markdown template. Change-Id: Id03f5c7eb84536697deca73d3fb397629b647a85 JIRA: VSPERF-181 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik6-134/+226
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21docs: installation guide updateMartin Klozik1-12/+33
Installation guide should be OS agnostic. Change-Id: Idba63925a27fd204c6542ca886381a56c0415dab JIRA: VSPERF-150 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-21bugfix: mount hugepages for PVP and PVVP scenariosMartin Klozik3-78/+127
Hugepages are used by both DPDK and Qemu. However they were mounted only in case, that OVS with DPDK support was detected. Thus code has been modified to mount hugepages in case that either DPDK usage or QEMU usage is detected. Change-Id: I662a6f0918b7b8d4fc38c2ce3d0d82bba0b8b2b0 JIRA: VSPERF-170 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21bugfix: remove QEMU warning during mount of shared directoryMartin Klozik1-1/+1
Qemu 2.3.0 requires image type to be explicitly set to 'raw' for shared directories with FAT. Required option "type=raw" is compatible with older QEMU versions, so it can be passed to QEMU by default. Change-Id: Icca5e4249cc2c05c0b9609d7bd34368b4b86f492 JIRA: VSPERF-187 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21Add testpmd as vswitch classRobert Wojciechowicz13-100/+631
The purpose of using testpmd instead of OVS is to get the baseline of the DUT when performing hardware offloading operations. There are supported different checksum calculation and txq flags settings. Change-Id: I93c9b45dcb31eaa1f610b7e061f3dd5936b0e6ec JIRA: VSPERF-193 Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik8-14/+102
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-20fuel-plugin: Initial version targeting Fuel8Billy O'Mahony11-0/+136
Change-Id: I21b24527da480c713899bffdaec8381752354e53 Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com>
2016-01-19reporting: add vswitch, vnf and trafficgen version into the reportMartin Klozik5-39/+162
Final test report MD file should contain information about version of vswitch, vnf, VM loopback forwarding application and traffic generator used during the test. In case that component is cloned from GIT repository, then hash of its recent commit should be part of the report too. Change-Id: I4eb398bc95bc5030d0852d08bcf9febbf17640d4 JIRA: VSPERF-172 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2016-01-19ci: show TC results inside Jenkins job console outputMartin Klozik1-0/+12
It is required to show detailed result figures together with OK/FAILED status. CI script has been modified to show formatted results from test report MD files. Change-Id: I9e3724c5aac517dc493f0cf57fc8292434c0bfe8 JIRA: VSPERF-184 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-13test_spec: LTD: RFC.WorstN-BestN testMiroslav Miklus1-0/+91
- Test ID: LTD.Throughput.RFC2544.WorstN-BestN JIRA: VSPERF-123 Change-Id: Ief04d8c415a77f4a9b77ba0d2a52653376b37ff1 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-13test_spec: LTD: UpdatesMiroslav Miklus1-13/+20
- document updates JIRA: VSPERF-123 Change-Id: Ic156bb43dbb04e8895ac3e194c0f485517af93ef Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-12vswitches: Remove datapath after stopping OVSDino Simeon Madarang3-1/+76
Remove the datapath that OVS creates, ovs-system, (can be viewed by ip link) after running OVS vanilla tests. Change-Id: I087c7b3f5afa546258227939ffcb38f0192f0d98 JIRA: VSPERF-175 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-11CI: terminate hanging vsperf before its executionMartin Klozik1-0/+27
In case that vsperf terminates unexpectedly, then vsperf itself or any of executed applications might remain active. It is essential to terminate any hanging instance of vsperf, ovs, qemu, etc. before re-execution of vsperf itself. Otherwise vsperf will fail again. Change-Id: Idd65288a5171d19fcbfb907a156347eb4b645a88 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2016-01-08update docs build dir names in .gitignoreRyota MIBU1-1/+2
Change-Id: Ie153c504b390dc68911a8f1d9a82c7a2e1901ec4 Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
2016-01-07src: fix ovs and qemu versionMaryam Tahhan1-2/+2
Qemu 2.2 doesn't compile on Fedora 22 and ovs was set to track the head of master. We need to fix this for OPNFV builds. Change-Id: I05823f96b9347ac322831a0dd3f3d63dcf726beb Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-01-06CI: bugfix of build-vsperf.sh scriptMartin Klozik1-1/+1
Vanilla version of OVS was enforced also for set of test, which should be executed with DPDK version of OVS. Value of --vswitch parameter was fixed. Change-Id: I3c486454ff5093436ddc64847e29e55e23764a92 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-05conf: modify core mask formatCiara Loftus1-2/+3
The pmd-cpu-core mask flag does not accept a hexmask with a leading '0x'. Remove these characters from the VSWITCH_PMD_CPU_MASK variable. JIRA: VSPERF-139 Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-05system: add build support for Fedora 20Mark Kavanagh2-0/+95
The most recent version of virtualenv available through installer tools on Fedora 20 is 3.3; existing build scripts for Fedora 21 and 22 reference version 3.4. Add relevant scripts to enable installation and build on F20. Change-Id: I87324fe55df0af687b616fd2e3f6419046a23e46 Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04docs: fix all/ index.rst links.Maryam Tahhan1-4/+4
JIRA: VSPERF-160 Change-Id: I5722fd8340e009cb1885981e6e40468df4d9216c Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-04docs: update release docs after reviewingMaryam Tahhan1-17/+5
Review and update release documentation for Release B. JIRA: VSPERF-160 Change-Id: I43c85639ed010f950dc3c85eecfe2ff47b65214d Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04Code checkerMartin Klozik1-0/+143
Initial implementation of code checker script. It uses pylint with vsperf specific pylintrc file to check code syntax, design, etc. Check can be performed for all files, specified directories or for modified files only. It will skip files defined by EXCLUDE_MODULES in conf/00_common.conf file. Details about script usage can be obtained by ./check -h. Change-Id: I7d894a2c4db92b7b9d4d4312e6f56bc48c8d5dbf JIRA: VSPERF-114 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04CI: update build-vsperf.sh scriptMartin Klozik1-1/+165
Script for execution of "daily" vswitchperf job has been updated. It is prepared also for execution of "verify" and "merge" jobs after their content will be defined. Change-Id: I64aa4a2aa23c93f1847cc4528fbdee6f71a62290 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04bugfix: Vanilla OVS kernel module broken dependenciesMartin Klozik1-1/+1
Vsperf doesn't install OVS kernel module into standard directory, to keep host OS untouched. Thus kernel module must be inserted by insmod and module dependencies solved manually. List of kernel modules was updated to load all dependencies for recent OVS version. Change-Id: Id147615ca95cfbde26d1dc8d6c9801f7bb3b5d36 JIRA: VSPERF-161 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-23vnf: support of vloop_vnf VMMartin Klozik3-41/+65
Additional modifications are required to support vloop_vnf as a master VM image for PVP and PVVP deployments. Firewall is disabled directly by call of iptables to avoid dependency on distribution specific firewall handling. Default configuration values in 04_vnf.conf were set according to vloop_vnf to make its usage easy. Values are generic enough to work well also with other images. Parameters VANILLA_NICx_NAME and vanilla_nicx_name were renamed to GUEST_NICx_NAME and guest_nicx_name respectively, because they are used for all vswitch versions. Functionality of CLI options was fixed. Default values of GUEST_NICx_NAME were changed to work with vloop_vnf image. Bug with modification of TRAFFIC_DEFAULTS values has been fixed. Deep copy is used and l2 and l3 dictionaries are correctly updated to avoid issues. Qemu disc emulation has been set to SCSI again to avoid error messages related to non-functional DMA in syslog. Appropriate kernel modules were added into vloop_vnf to support scsi disk emulation during boot. Change-Id: I5901f454861f99d21cca03030d6d5468ab71a8af JIRA: VSPERF-133 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-23docs: update design docs after reviewingMaryam Tahhan1-13/+13
Review and update design documentation for Release B. JIRA: VSPERF-160 Change-Id: I2c2167b5ac9161e30aacd277060da22a559dd0c2 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-23docs: update userguides after reviewingMaryam Tahhan3-105/+136
Review and update userguides for Release B. JIRA: VSPERF-160 Change-Id: I54c4dd37fa5951cab9d0e17bb2f3a4d273741cb0 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-21docs: updates and move traffic gens to separate docMaryam Tahhan22-404/+754
Move the traffic gen instructions to a separate user guide and add information on usage of the Dummy traffic generator. Update docs to fix PDF build failure and do general clean-up. Removed the numbering from the LTD and added the numbered directive to automate numbering for sections and headers. Add comment anchors that reflect the section numbers. Change-Id: I984ca38456a891c439697ebc1da041bc1d828a15 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-16Back2Back: update default paramsMaryam Tahhan4-10/+17
Update the default duration of a back to back test to be 2 seconds which is the minimum recommended by RFC2544, and update the Trials to be 50, which is also the default value specified by the RFC. This patch also fixes the tcl script to allow for the minimum framesize to be sent from the traffic gen. JIRA: Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
2015-12-15CI: Create simple Hello world build-vsperf.shRadek Zetik1-0/+3
Create a ci directory and create a simple "echo Hello world" in a shell script called build-vsperf.sh. The file will be used as a placeholder for OPNFV Jenkins vsperf-daily-master job. JIRA: VSPERF-157 Change-Id: Ibe5ca31f8776fcf4ba6b1e353383a03566617350 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-15INFO: remove inactive committersMaryam Tahhan1-5/+0
Remove inactive committers who cannot be contacted or who have stepped down from the committer role. Change-Id: Ied02443b571d0dc70135329aed65af2acb9fe426 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-14Results: Integrate with opnfv_test_dashboardRadek Zetik4-3/+28
The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name: example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" Additionally, there are two parameters with default values: OPNFV_URL = "http://213.77.62.197" Defines address of opnfv releng database server PACKAGE_LIST = "src/package-list.mk" OVS and DPDK tags are read from this file and values are used for creation of 'version' filed. The patch requires 'requests' module. The requirements.txt is updated. JIRA: VSPERF-112 Change-Id: I49f6f5058b1bce8a257669efa8229ff31879481d Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>