Age | Commit message (Collapse) | Author | Files | Lines |
|
Adding changes for supporting continuous traffic for Spirent Testcenter
The changes are as follows:
1. From send_cont_traffic invoke function in testcenter-rfc2544-rest.py
2. In testcenter-rfc2544-rest.py check for the traffic_custom
3. If the traffic_custom is 'cont' do additional configuration on
traffic.
JIRA: VSPERF-146
Change-Id: Ic963f9f0c2bd013f6e676c9d18b151ae67ff77af
Signed-off-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Update integration document to reflect tests are not
just overlay tests.
* Include instructions for using macros
* Include information on test step validation
JIRA: VSPERF-298
Change-Id: Ic0d5f277b2a8b646f331e967f83421708b374f21
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
VSPERF uses ifconfig at several places to bring up
a networking interface. However ifconfig has been
deprecated by iproute2 package and it is not available
in standard installation of many Linux distributions.
Thus all calls of ifconfig have been replaced by
call of 'ip' tool.
Change-Id: I935eaf85b6082e4641d12cffea3e0882c634e5ea
JIRA: VSPERF-299
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
|
|
Change-Id: Id3a38d662c330cd388c6509c9d6e90409c1da6e7
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
|
|
Change-Id: I508954206a92a96446b28f40680acb87cd916c0b
Signed-off-by: Aric Gardner <agardner@linuxfoundation.org>
|
|
Fix run_task to correctly provide all output from command
sent. Commands that produced longer output would not
return all text.
JIRA: VSPERF-296
Change-Id: I7e501690ffdb7c01f90d524ffbabe65500f62304
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix xena_json module to correctly assign hwmodifier for
multistream. Append was incorrect application and
list needs to be assigned directly.
JIRA: VSPERF-293
Change-Id: I88d1930b88711af7c920b507a4db6c29cca83d8d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Configuration options modified by VSPERF were split
between config_base and config_linuxapp files. Makefile
was modified to reflect this change.
Additional changes:
* content of qemu shared dir is copied without preservation
of attributes to avoid compilation issues due misaligned
clocks => could produce broken igb_uio module
* added support of new testpmd "Bye.." message
* DPDK sources are copied from RTE_SDK_USER directory for all
VNF variants - this has been wrongly reverted by inttest patch
Change-Id: Id502a072c1f843258496decbf031e7ba7264d459
JIRA: VSPERF-297
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Michal Weglicki <michalx.weglicki@intel.com>
|
|
|
|
Add instructions for gotcha when activating the python 3 env.
Change-Id: Ia531ca796ad15354974dee13033a8d97a42c7747
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
|
|
Ovsdb must be up and running before any configuration
option is modified or vswitchd is executed.
Otherwise options won't be modified in DB and/or vswitchd
won't be able to use correct options during start up.
Change-Id: I04948d383272f2e694ec685b3a21d639068125ca
JIRA: VSPERF-291
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
|
|
Measure the execution time for a testcase and add it to the log. We need
to report the test execution times for the testcases for OPNFV release
C. Modified the timing result in the csv + results file to display a
H:M:S format.
Change-Id: Ife9e361da5f8b3fc3721050ae3e6dce049f7402d
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Updated the added features list in NEWS.rst. If there's anything I
missed please let me know.
Change-Id: I12dd63cbea293642f14e1ab3eb0d5b715e3a015e
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Upgrade OVS version tested to 2.5. Tested with OVS with DPDK and stock
OVS.
JIRA: VSPERF-254
Change-Id: I78f6cdca0b96c5b13524cec3a662e55f49320f69
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Add python path to ./configure arguments for QEMU to overcome build issue.
Change-Id: I6a29f471a27bc0088609bf78176120637709df21
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Added sysstat package to build base machine for Ubuntu.
Change-Id: I648f5a8db21a7713fb5c24ef010db877c9ec4d15
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Configuration of DPDK options in ovs-vswitchd has changed.
Previously used option --dpdk was deprecated and all DPDK
related options have to be configured through ovsdb via ovs-vsctl
calls. VSPERF was modified to detect and use correct version
of DPDK configuration. New configuration options should
be put into VSWITCHD_DPDK_CONFIG dictionary.
VSPERF classes specific to OVS were refactored.
Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb
JIRA: VSPERF-291
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Support for reporting FPS and MBPS (TX and RX) is added.
JIRA: VSPERF-285
Change-Id: Ic4b6ca02368b1808f0f985e90099cdb0b41c2afa
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
|
|
|
|
|
|
|
|
Fixes bi-directional param and enforces string type in
testcase configuration. Modifies all instance where bi
directional value is used to string.
* Changes documentation to specify value type as needed
* Changes traffic defaults to use string for bidir value
* Fixes testcases configuration files to use bidir as str
* Change testcase conf documentation to note enforcement
of string type
* Sets bidir to title format to keep consitency in traffic
profile when passed to traffic generators
* Fix pvp/pvvp check for bidir value
* Raise exception if testcase configuration is not set
as str for bidir value
* Change Xena bi-dir check to string compare instead of
typecasting to boolean to compare.
JIRA: VSPERF-282
Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Wrong version of virtualenv was executed in Ubuntu
specific script. So python modules could not be installed
and vsperf was not working.
Hugepages mount point is newly created inside
sudo environment to avoid issues with permissions.
Change-Id: I4f5afc22bceb2eebbf018c42f42b7074a93e2293
JIRA: VSPERF-292
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Cleanup phase of PVVP scenario sometimes causes server reboot.
Following updates were made to prevent reboots:
* better generic process termination procedure
* ovsdb is terminated after vswitchd termination
* vswitchd is terminated directly instead of parent sudo process
* already running VNFs are terminated in case of failure during
VNF start()
Change-Id: Ic09d60d7bfdea01c84a2685ede3d0316f0d09be7
JIRA: VSPERF-271
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Adds some documentation to the installation guide on proper
hugepage configuration to run vsperf with dpdk and/or guests.
JIRA: VSPERF-256
Change-Id: I3b85fe7d69b00841844aa82ba8faf936d7e37825
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
In the past DPDK, OVS and QEMU were copied and compiled for all
three OVS configurations, i.e. Vanilla OVS, OVS+DPDK with vHost Cuse
and OVS+DPK with vHost User. Later compilation of QEMU was triggered
just once and DPDK compilation was removed from OVS Vanilla dir.
However source code was still copied to all directories. Unnecessary
copy operations were removed.
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Integration TC support has been enhanced to support PVP
and PVVP scenarios. Definition of integration testcases
have been modified to use a sort of macros for repetitive
parts.
Additional improvements were introduced:
* instances of testcases are created only for testcases
selected for execution
* new TC definition options allow to define test specific
vswitch, VNF, traffic generator and test options
* tests filter applied on pattern specified by --tests
allows to define negative filter only; In that case
list of all tests is used as base for negative filter.
* traffic values defined within teststep passed to send_traffic
is merged with default values; This is essential for execution
of TCs with linux_bridge or SRIOV support. It also simplifies
integration TC definition
* typos removed
Change-Id: Icb734a7afd7e5154f27a8ff25615a39e01f58c27
JIRA: VSPERF-213
JIRA: VSPERF-216
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Adds port ip set options as part of conf files. Allows for IPv4
address assignment. Adds ipv6 options for later implementation
when available in framework.
* Adds Xena to documentation area where available traffic gens
are listed.
JIRA: VSPERF-273
Change-Id: Ia4129222ea95f1d399d5cc0c589c9a99d7b1b81a
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds Xena version info to report files. Works by pulling the
version info from the result file and adding it to the
settings dictionary.
JIRA: VSPERF-274
Change-Id: I2b7db30e5a621f32a7eaacfe48ab1bca498e4287
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Always copy testpmd sources from the directory with vHost User
version of DPDK. This will avoid possible issues with missing
dependencies in some VM images. It will also ensure, that testpmd
inside VM is agnostic to chosen vHost method.
Change-Id: I0496cc846eff3f7d4c1aef0a9c825545a4c3c818
JIRA: VSPERF-283
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Allows for execution of back 2 back tests by enabling back to back
test scenario in json file when executing Xena2544.exe. Return
results are the number of frames. Results for test execution can
be found in the coresponding JIRA ticket.
- Disabled throughput by default in json file.
- Modified test params in baseconfig file for b2b test
- Modified create_result method to use data in resulting xml file
over using inspect strategy to detect test type
- Added line to Xena installation guide for issue that was found
locally after installation
JIRA: VSPERF-264
Change-Id: I0ecd6e1ce750613c53fe308aea3f5a55cca69c20
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fixes the build scripts to stop using arch specific packages.
The issue was found on an x86_64 arch when performing the
installation script. The glibc.i686 would fail to install
because a dependency was installed with a x86_64 arch.
While testing I found other versions of Fedora should also
include the glib2-devel package which was added to Fedora 22
build_base_machine script in another patch. This does not
seem to be included in the base installation of the OS.
Tested on Centos7, Fedora22, 21, 20, and Rhel7.2.
JIRA: VSPERF-281
Change-Id: I884d14fdacf0ceb96c9dc341e82c96d864653766
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Cleanup phase of PVVP scenario sometimes causes server reboot.
Following updates were made to prevent reboots:
* sleep after VM OS shutdown allows QEMU to finish its own shutdown
procedure
* shared dir was mounted as read only to prevent its modification,
which sometimes causes delays during shutdown; Also warning messages
are causing CI jobs failures.
Change-Id: I1607e79beeee343893496efe01ca0be5ea684a9d
JIRA: VSPERF-271
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Generic support of SRIOV has been added. Virtual interfaces can be
used in multiplei scenarios instead of physical NICs. Virtual
functions can be directly accessed from VM by PCI passthrough method.
Another option is to use VFs with vSwtich to evaluate impact
on performance.
Additonal modifications:
* Automatic detection of NIC details has been added to simplify
configuration.
* Obsoleted configuration options have been removed.
* Logging usage within vsperf script was fixed.
* Vsperf main was refactored and final cleanup function added.
* Configurable forwarding mode of TestPMD executed inside VM.
JIRA: VSPERF-198
Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Rename LTD.Scalability.RFC2544.0PacketLoss to
LTD.Scalability.Flows.RFC2544.0PacketLoss to indicate what is being
scaled.
Change-Id: I398cbccf319fc09b621e7a68d7f81e4ff8d0b050
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
The import of stcrestclient in moved down to avoid execution errors.
Change-Id: Ib9b64f62400c20a031f0ffcd3410582741cf1644
JIRA: VSPERF-237
|
|
Repair of documentation and configuration files where test-params
is incorrectly listed as test-param.
JIRA: VSPERF-266
Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add files for Xena Networks 2544 throughput
implementation. This allows for Xena to execute
tput tests from VSPerf. For information on how
this works please see the JIRA ticket.
Modify traffic gen guide on install instructions
for Xena. Add in scapy to requirements file. Modify
conf file for Xena chassis connection information.
* Added license info to __init__.py / baseconfig.x2544
* Set initial rate to 10% line rate for tput testing
* Modified default mac address xena_json->set_header_layer2
from aa:aa:aa:aa:aa:aa to cc:cc:cc:cc:cc:cc
* Removed obsolete multistream params
* Added traffic params to 03_traffic.conf
* Comments to explain try/catch for latency values
* Removed unused import
* Rebased to fix merge conflict
* Added Xena to available traffic gen list in conf files
JIRA: VSPERF-261
Change-Id: I3c4b4a332fd532e10b6096e9ed97a4a39d410839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
A few fixes in documentation to assure clean pdf build.
Change-Id: Ib42818820f18ee96efb98d2016f4d6d9ee3e2b62
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Stcrestclient package based script is added. Support for RFC22544
backtoback, latency, frameloss are also added, along with the throughput.
Comments Addressed:
1. Parameter name consistency. Ex: use duration (refer dummy.py).
2. Moved 'only the necessary contents of README to
configguide/trafficgen.rst.
3. Removed README file
4. Commit message format (pkt_gen: and linewrap)
5. Merged 4 scripts (throughput/backtoback/latency/frameloss)
that were rest-based into one single script.
Name: testcenter-rfc2544-test.py
6. Changed year to 2016
7. Moved imports to the top (testcenter-rfc2544-rest.py)
8. Changed prints to Log (testcenter-rfc2544-rest.py)
9. Reporting the frame loss percentage.
10. Calls to frameloss and latency are not added as the 'caller'
class TrafficControllerRFC2544 is only calling backtoback and
throughput.
11. Changed Exception, e to Exception as e for python 3
compatibility
12. Remaining prints to debug and logger.error for errors.
13. Moved Session creation under try block.
14. Removed deadcode
15. Fixed missing docstring
16. Generic to specific Exception.
17. if-if to if-elif
18. Debug level logging only under verbose flag.
19. Fixed Arguments mismatch.
20. Ordering of the imports
Note: The testcenter-rfc2544-rest.py is spawned as a separate process,
and need not be wrapped in a class.
JIRA: VSPERF-237
Change-Id: I05d2b24fca1da4ba67bc4d79206c5d755ebf8f20
Signed-off-by: sridharkn <sridhar.rao@spirent.com>
|
|
Fixing default param for packet sizes to be of correct parameter
name.
JIRA: VSPERF-260
Change-Id: Ie09cae6fa47d85f1a15e7da40325a48d3acd1518
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Cleanup phase of PVVP scenario sometimes causes server reboot.
It seems, that forced kill of VMs is the root cause. So graceful
shutdown of VMs was introduced.
Change-Id: I427404406fd7174d2a034f3cf0b51fe0833f9ecf
JIRA: VSPERF-271
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|