Age | Commit message (Collapse) | Author | Files | Lines |
|
Functional testcases for the validation of Custom Statistics support
by OVS. The Custom Statistics feature allows Custom Statistics to be
accessed by VSPERF.
These statistics include for example rx_missed_errors, rx_errors,
tx_errors, rx_mbuf_allocation_errors, rx_crc_errors.
These testcases require DPDK v17.11, the latest Open vSwitch(v2.9.90)
and the IxNet traffic-generator.
JIRA: VSPERF-572
Change-Id: I30cbe6067d6bdd0fc2a262b86f306b66a77d085f
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
A support for proper reporting of "Burst" traffic type was added.
Several bugs were fixed:
* RFC2544 Throughput - end of search condition was moved to avoid
situation, that another iteration is executed but its results
dropped
* RFC2544 Throughput - pause after each iteration was added to ensure
that all frames are cleared from buffers; It improves stability
of results. Also "received" values are no longer higher then
"sent" values.
* VSPERF will report also the number of sent and received frames
* VSPERF will correctly process send and received values - they
were switched on several places
JIRA: VSPERF-149
JIRA: VSPERF-562
Change-Id: I8a5caa6385a1ef86aa4bf4511d2753100ed0ab14
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Richard Elias <richardx.elias@intel.com>
|
|
A set of regression tests for verification of OVS/DPDK
features was introduced. Following features are tested:
* DPDK NIC Support
* DPDK Hotplug Support
* RX Checksum Support
* Flow Control Support
* Multiqueue Support
* Vhost User
* Virtual Devices Support
* NUMA Support
* Jumbo Frame Support
* Rate Limiting
* Quality of Service
JIRA: VSPERF-539
Change-Id: I6c83e9c38e29f197a5236ac68c88d7045fef775b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Signed-off-by: Richard Elias <richardx.elias@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch introduces several improvements and small bugfixes
of teststeps. These changes were identified during implementation
of OVS/DPDK regression tests.
Patch content:
* teststeps: step aliases were implemented
* teststeps: improved filtering by regex for any step, which returns string
or list of stings; filter will process all lines
* teststeps: support for log object
* teststeps: support for trafficgen get_results call
* teststeps: configurable suppression of step validation
* trafficgen: remove old results before traffic is executed
* trafficgen: support for flow control on/off (IxNet)
* trafficgen: support for configurable learning frames (IxNet)
* trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION
and _LOSSRATE
* vnf: flush pexpect output of previous commands
* vnf: use execute_and_wait() to ensure correct cmds order
* vnf: dpdk vHost User interface name set according to its type,
e.g. dpdkvhostuserclient
* vswitch: support for OVS restart
* decap: simplify configuration of tunneling decapsulation tests
* settings: values of all configuration options are restored after TC execution
* modified formatting of test description used by --list
* testcase name and description is logged before its execution
* small bugfixes
JIRA: VSPERF-539
Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
A set of improvements was introduced to enhance step driven
testcases capabilities.
Details:
* delay among test steps is configurable by TEST_STEP_DELAY
parameter
* step driven tool function exec was renamed to exec_shell
* new step driven tool function exec_python was introduced to execute
a python code
* new step driven object sleep was introduced to pause test execution
for defined number of seconds.
* fixed bug in settings.validate_getValue() to correctly validate
access of parameters modified by TEST_PARAMS
* new #PARAM() macro was introduced to allow references among
configuration parameters
* multistream support has been added into ixnetrfc2544v2.tcl,
which is used for tunneling protocols test (op2p deployment)
* fixed bug in op2p deployment to list interfaces and flows
from both bridges involved in the test
* test report updated to state exact rfcxxxx type of traffic
type, e.g. rfc2544_continuous
* test report of step driven testcases was updated to contain
measured values from traffic generator in CSV report
* method for ovs flow comparison was modified to normalize
IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8)
JIRA: VSPERF-512
Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
|
|
For some testcases it is useful to have only one connection between
traffic generator and DUT. Thus IxNet class was extended to support
such connection. Feature is enabled if both IXIA ports are set to
the same value.
New integration testcase ixnet_pvp_tput_1nic was created to demonstrate
this feature.
Unused code was removed from 3rd_party/ixia/ixnetrfc2544.tcl to simplify
introduction of new features and to speed up IXIA configuration.
JIRA: VSPERF-503
Change-Id: I92ab24fa58eeb1ccb7f00ac7f3530ffca7b99241
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
During testing it is sometimes useful to generate pure L2 traffic
without L3 or L4 related headers. IxNetwork TCL script was updated
to support this option.
Generic TRAFFIC array was enhanced by on/off switch for L3 and L4
headers. Thus it can be implemented by other traffic generators
in the future, if this feature will prove itself useful.
JIRA: VSPERF-500
Change-Id: I723c703e5d6ef609fd5b7db366871278a4730203
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
IxNet class, which controls IXIA via IxNetwork TCL
server, did not support VLAN configuration. Main TCL
script 3rd_party/ixia/ixnetrfc2544.tcl was updated
to support VLAN configuration.
JIRA: VSPERF-499
Change-Id: I89b33dfc653fd59c2983e78a6532812a4c29bddf
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Restriction of 64K streams was limited only to L4 stream
type. In case of L3 and L2 stream type, it is possible to
define unlimited number of streams to be simulated
by traffic generator.
JIRA: VSPERF-498
Change-Id: I4ce3253299473127d135c01543999a8593b9556f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch fixes the setting of the packet fields generated by IXIA.
So that packets will be created with the values we pass, eg UDP
source port, UDP dest port, MAC source address.
JIRA: VSPERF-477
Change-Id: I15371b9f4e5fe60f738fc0e836ec7abc4f2a3938
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik martinx.klozik@intel.com
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
IXIA traffic generator can be controlled by two different
VSPERF's wrappers IxNet (preferred) and Ixia (legacy and
outdated). It has been found, that Ixia wrapper can't be used
because of missing "packetsize" traffic item. Also only
IXIA OS 6.60 was supported and never IXIA OS versions
were not working. Both limitations were fixed.
Also reported results were fixed to show correct values
for MBPS items.
JIRA: VSPERF-417
Change-Id: I191aa9fee2683877ce373b6aa7cd1c72e9847568
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Christo Kleu <christo.kleu@netronome.com>
|
|
All files, which do not comply to Apache 2.0 license,
are moved into dedicated 3rd_party directory. This will
simplify license checks performed on vsperf code.
It is not required to move l2fwd module from its
current location.
JIRA: VSPERF-413
Change-Id: I6b4bd6bb5542e6db9a7ef91ee3f5f2907f93e9b8
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|