aboutsummaryrefslogtreecommitdiffstats
path: root/tools/pkt_gen/ixia/pass_fail.tcl
diff options
context:
space:
mode:
Diffstat (limited to 'tools/pkt_gen/ixia/pass_fail.tcl')
-rwxr-xr-xtools/pkt_gen/ixia/pass_fail.tcl760
1 files changed, 0 insertions, 760 deletions
diff --git a/tools/pkt_gen/ixia/pass_fail.tcl b/tools/pkt_gen/ixia/pass_fail.tcl
deleted file mode 100755
index 79b7f10d..00000000
--- a/tools/pkt_gen/ixia/pass_fail.tcl
+++ /dev/null
@@ -1,760 +0,0 @@
-#!/usr/bin/env tclsh
-
-# Copyright (c) 2014, Ixia
-# Copyright (c) 2015-2016, Intel Corporation
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-# This file is a modified version of a script generated by Ixia
-# IxExplorer.
-
-lappend auto_path [list $lib_path]
-
-package req IxTclHal
-
-###################################################################
-########################## Configuration ##########################
-###################################################################
-
-# Verify that the IXIA chassis spec is given
-
-set reqVars [list "host" "card" "port1" "port2"]
-
-foreach var $reqVars {
- set var_ns [namespace which -variable "$var"]
- if { [string compare $var_ns ""] == 0 } {
- errorMsg "The '$var' variable is undefined. Did you set it?"
- return -1
- }
-}
-
-# constants
-
-set fullHex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
-set hexToC5 "000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435363738393A3B3C3D3E3F404142434445464748494A4B4C4D4E4F505152535455565758595A5B5C5D5E5F606162636465666768696A6B6C6D6E6F707172737475767778797A7B7C7D7E7F808182838485868788898A8B8C8D8E8F909192939495969798999A9B9C9D9E9FA0A1A2A3A4A5A6A7A8A9AAABACADAEAFB0B1B2B3B4B5B6B7B8B9BABBBCBDBEBFC0C1C2C3C4C5"
-
-#set payloadLookup(64) [string range $fullHex 0 11]
-set payloadLookup(64) "000102030405"
-set payloadLookup(128) "000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435363738393A3B3C3D3E3F404142434445"
-set payloadLookup(256) "$hexToC5"
-set payloadLookup(512) "$fullHex$hexToC5"
-set payloadLookup(1024) "$fullHex$fullHex$fullHex$hexToC5"
-
-###################################################################
-###################### Chassis Configuration ######################
-###################################################################
-
-if {[isUNIX]} {
- if {[ixConnectToTclServer $host]} {
- errorMsg "Error connecting to Tcl Server $host"
- return $::TCL_ERROR
- }
-}
-
-######### Chassis #########
-
-# Now connect to the chassis
-if [ixConnectToChassis $host] {
- ixPuts $::ixErrorInfo
- return 1
-}
-
-# Get the chassis ID to use in port lists
-set chassis [ixGetChassisID $host]
-
-######### Ports #########
-
-set portList [list [list $chassis $card $port1] \
- [list $chassis $card $port2]]
-
-# Clear ownership of the ports we’ll use
-if [ixClearOwnership $portList force] {
- ixPuts $::ixErrorInfo
- return 1
-}
-
-# Take ownership of the ports we’ll use
-if [ixTakeOwnership $portList] {
- ixPuts $::ixErrorInfo
- return 1
-}
-
-foreach portElem $portList {
- set chasNum [lindex $portElem 0]
- set cardNum [lindex $portElem 1]
- set portNum [lindex $portElem 2]
-
- port setFactoryDefaults $chasNum $cardNum $portNum
- port config -speed 10000
- port config -flowControl true
- port config -transmitMode portTxModeAdvancedScheduler
- port config -receiveMode [expr $::portCapture|$::portRxModeWidePacketGroup]
- port config -advertise100FullDuplex false
- port config -advertise100HalfDuplex false
- port config -advertise10FullDuplex false
- port config -advertise10HalfDuplex false
- port config -portMode port10GigLanMode
- port config -enableTxRxSyncStatsMode true
- port config -txRxSyncInterval 2000
- port config -enableTransparentDynamicRateChange true
- port config -enableDynamicMPLSMode true
- if {[port set $chasNum $cardNum $portNum]} {
- errorMsg "Error calling port set $chasNum $cardNum $portNum"
- }
-
- packetGroup setDefault
- packetGroup config -numTimeBins 1
- if {[packetGroup setRx $chasNum $cardNum $portNum]} {
- errorMsg "Error calling packetGroup setRx $chasNum $cardNum $portNum"
- }
-
- sfpPlus setDefault
- sfpPlus config -enableAutomaticDetect false
- sfpPlus config -txPreTapControlValue 1
- sfpPlus config -txMainTapControlValue 63
- sfpPlus config -txPostTapControlValue 2
- sfpPlus config -rxEqualizerControlValue 0
- if {[sfpPlus set $chasNum $cardNum $portNum]} {
- errorMsg "Error calling sfpPlus set $chasNum $cardNum $portNum"
- }
-
- filter setDefault
- filter config -captureTriggerFrameSizeFrom 48
- filter config -captureTriggerFrameSizeTo 48
- filter config -captureFilterFrameSizeFrom 48
- filter config -captureFilterFrameSizeTo 48
- filter config -userDefinedStat1FrameSizeFrom 48
- filter config -userDefinedStat1FrameSizeTo 48
- filter config -userDefinedStat2FrameSizeFrom 48
- filter config -userDefinedStat2FrameSizeTo 48
- filter config -asyncTrigger1FrameSizeFrom 48
- filter config -asyncTrigger1FrameSizeTo 48
- filter config -asyncTrigger2FrameSizeFrom 48
- filter config -asyncTrigger2FrameSizeTo 48
- filter config -userDefinedStat1Enable true
- filter config -userDefinedStat2Enable true
- filter config -asyncTrigger1Enable true
- filter config -asyncTrigger2Enable true
- if {[filter set $chasNum $cardNum $portNum]} {
- errorMsg "Error calling filter set $chasNum $cardNum $portNum"
- }
-
- filterPallette setDefault
- filterPallette config -pattern1 00
- filterPallette config -patternMask1 00
- filterPallette config -patternOffset1 20
- filterPallette config -patternOffset2 20
- if {[filterPallette set $chasNum $cardNum $portNum]} {
- errorMsg "Error calling filterPallette set $chasNum $cardNum $portNum"
- }
-
- capture setDefault
- capture config -sliceSize 65536
- if {[capture set $chasNum $cardNum $portNum]} {
- errorMsg "Error calling capture set $chasNum $cardNum $portNum"
- }
-
- if {[interfaceTable select $chasNum $cardNum $portNum]} {
- errorMsg "Error calling interfaceTable select $chasNum $cardNum $portNum"
- }
-
- interfaceTable setDefault
- if {[interfaceTable set]} {
- errorMsg "Error calling interfaceTable set"
- }
-
- interfaceTable clearAllInterfaces
- if {[interfaceTable write]} {
- errorMsg "Error calling interfaceTable write"
- }
-
- ixEnablePortIntrinsicLatencyAdjustment $chasNum $cardNum $portNum true
-}
-
-ixWritePortsToHardware portList
-
-if {[ixCheckLinkState $portList] != 0} {
- errorMsg "One or more port links are down"
-}
-
-proc sendTraffic { flowSpec trafficSpec } {
- # Send traffic from IXIA.
- #
- # Transmits traffic from Rx port (port1), and captures traffic at
- # Tx port (port2).
- #
- # Parameters:
- # flowSpec - a dict detailing how the packet should be sent. Should be
- # of format:
- # {type, numpkts, duration, framerate}
- # trafficSpec - a dict describing the packet to be sent. Should be
- # of format:
- # { l2, vlan, l3}
- # where each item is in turn a dict detailing the configuration of each
- # layer of the packet
- # Returns:
- # Output from Rx end of Ixia if duration != 0, else 0
-
- ##################################################
- ################# Initialisation #################
- ##################################################
-
- # Configure global variables. See documentation on 'global' for more
- # information on why this is necessary
- # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
- global portList
-
- # Extract the provided dictionaries to local variables to simplify the
- # rest of the script
-
- # flow spec
-
- set streamType [dict get $flowSpec type]
- set numPkts [dict get $flowSpec numpkts]
- set duration [expr {[dict get $flowSpec duration] * 1000}]
- set frameRate [dict get $flowSpec framerate]
-
- # traffic spec
-
- # extract nested dictionaries
- set trafficSpec_l2 [dict get $trafficSpec l2]
- set trafficSpec_l3 [dict get $trafficSpec l3]
- set trafficSpec_l4 [dict get $trafficSpec l4]
- set trafficSpec_vlan [dict get $trafficSpec vlan]
-
- set frameSize [dict get $trafficSpec_l2 framesize]
- set srcMac [dict get $trafficSpec_l2 srcmac]
- set dstMac [dict get $trafficSpec_l2 dstmac]
- set srcPort [dict get $trafficSpec_l4 srcport]
- set dstPort [dict get $trafficSpec_l4 dstport]
-
- set proto [dict get $trafficSpec_l3 proto]
- set srcIp [dict get $trafficSpec_l3 srcip]
- set dstIp [dict get $trafficSpec_l3 dstip]
-
- if {[dict exists $trafficSpec_l3 protocolpadbytes]} {
- set protocolPad [dict get $trafficSpec_l4 protocolpad]
- set protocolPadBytes [dict get $trafficSpec_l4 protocolpadbytes]
- }
-
- set vlanEnabled [dict get $trafficSpec_vlan enabled]
- if {$vlanEnabled == 1 } {
- # these keys won't exist if vlan wasn't enabled
- set vlanId [dict get $trafficSpec_vlan id]
- set vlanUserPrio [dict get $trafficSpec_vlan priority]
- set vlanCfi [dict get $trafficSpec_vlan cfi]
- }
-
- ##################################################
- ##################### Streams ####################
- ##################################################
-
- streamRegion get $::chassis $::card $::port1
- if {[streamRegion enableGenerateWarningList $::chassis $::card $::port1 false]} {
- errorMsg "Error calling streamRegion enableGenerateWarningList $::chassis $::card $::port1 false"
- }
-
- set streamId 1
-
- stream setDefault
- stream config -ifg 9.6
- stream config -ifgMIN 19.2
- stream config -ifgMAX 25.6
- stream config -ibg 9.6
- stream config -isg 9.6
- stream config -rateMode streamRateModePercentRate
- stream config -percentPacketRate $frameRate
- stream config -framesize $frameSize
- stream config -frameType "08 00"
- stream config -sa $srcMac
- stream config -da $dstMac
- stream config -numSA 16
- stream config -numDA 16
- stream config -asyncIntEnable true
- stream config -dma $streamType
- stream config -numBursts 1
- stream config -numFrames $numPkts
- stream config -patternType incrByte
- stream config -dataPattern x00010203
- stream config -pattern "00 01 02 03"
-
- protocol setDefault
- protocol config -name ipV4
- protocol config -ethernetType ethernetII
- if {$vlanEnabled == 1} {
- protocol config -enable802dot1qTag vlanSingle
- }
-
- if {[info exists protocolPad]} {
- protocol config -enableProtocolPad $protocolPad
- }
-
- ip setDefault
- ip config -ipProtocol ipV4Protocol[string totitle $proto]
- ip config -checksum "f6 75"
- ip config -sourceIpAddr $srcIp
- ip config -sourceIpAddrRepeatCount 10
- ip config -sourceClass classA
- ip config -destIpAddr $dstIp
- ip config -destIpAddrRepeatCount 10
- ip config -destClass classA
- ip config -destMacAddr $dstMac
- ip config -destDutIpAddr 0.0.0.0
- ip config -ttl 64
- if {[ip set $::chassis $::card $::port1]} {
- errorMsg "Error calling ip set $::chassis $::card $::port1"
- }
-
- "$proto" setDefault
- "$proto" config -checksum "25 81"
- if {["$proto" set $::chassis $::card $::port1]} {
- errorMsg "Error calling $proto set $::chassis $::card $::port"
- }
-
- if {[info exists protocolPad]} {
- protocolPad setDefault
- # VxLAN header with VNI 99 (0x63)
- # Inner SRC 01:02:03:04:05:06
- # Inner DST 06:05:04:03:02:01
- # IP SRC 192.168.0.2
- # IP DST 192.168.240.9
- # SRC port 3000 (0x0BB8)
- # DST port 3001 (0x0BB9)
- # length 26
- # UDP Checksum 0x2E93
-
- # From encap case capture
- protocolPad config -dataBytes "$protocolPadBytes"
- if {[protocolPad set $::chassis $::card $::port1]} {
- errorMsg "Error calling protocolPad set $::chassis $::card $::port"
- set retCode $::TCL_ERROR
- }
- }
-
- if {$vlanEnabled == 1 } {
- vlan setDefault
- vlan config -vlanID $vlanId
- vlan config -userPriority $vlanUserPrio
- vlan config -cfi $vlanCfi
- vlan config -mode vIdle
- vlan config -repeat 10
- vlan config -step 1
- vlan config -maskval "0000XXXXXXXXXXXX"
- vlan config -protocolTagId vlanProtocolTag8100
- }
-
- if {[vlan set $::chassis $::card $::port1]} {
- errorMsg "Error calling vlan set $::chassis $::card $::port1"
- }
-
- if {[port isValidFeature $::chassis $::card $::port1 $::portFeatureTableUdf]} {
- tableUdf setDefault
- tableUdf clearColumns
- if {[tableUdf set $::chassis $::card $::port1]} {
- errorMsg "Error calling tableUdf set $::chassis $::card $::port1"
- }
- }
-
- if {[port isValidFeature $::chassis $::card $::port1 $::portFeatureRandomFrameSizeWeightedPair]} {
- weightedRandomFramesize setDefault
- if {[weightedRandomFramesize set $::chassis $::card $::port1]} {
- errorMsg "Error calling weightedRandomFramesize set $::chassis $::card $::port1"
- }
- }
-
- if {$proto == "tcp"} {
- tcp setDefault
- tcp config -sourcePort $srcPort
- tcp config -destPort $dstPort
- if {[tcp set $::chassis $::card $::port1 ]} {
- errorMsg "Error setting tcp on port $::chassis.$::card.$::port1"
- }
-
- if {$vlanEnabled != 1} {
- udf setDefault
- udf config -repeat 1
- udf config -continuousCount true
- udf config -initval {00 00 00 01}
- udf config -updown uuuu
- udf config -cascadeType udfCascadeNone
- udf config -step 1
-
- packetGroup setDefault
- packetGroup config -insertSequenceSignature true
- packetGroup config -sequenceNumberOffset 38
- packetGroup config -signatureOffset 42
- packetGroup config -signature "08 71 18 05"
- packetGroup config -groupIdOffset 52
- packetGroup config -groupId $streamId
- packetGroup config -allocateUdf true
- if {[packetGroup setTx $::chassis $::card $::port1 $streamId]} {
- errorMsg "Error calling packetGroup setTx $::chassis $::card $::port1 $streamId"
- }
- }
- } elseif {$proto == "udp"} {
- udp setDefault
- udp config -sourcePort $srcPort
- udp config -destPort $dstPort
- set packetSize [dict get $trafficSpec_l3 packetsize]
- stream config -framesize $packetSize
- if {[udp set $::chassis $::card $::port1]} {
- errorMsg "Error setting udp on port $::chassis.$::card.$::port1"
- }
- errorMsg "frameSize: $frameSize, packetSize: $packetSize, srcMac: $srcMac, dstMac: $dstMac, srcPort: $srcPort, dstPort: $dstPort"
- if {[info exists protocolPad]} {
- errorMsg "protocolPad: $protocolPad, protocolPadBytes: $protocolPadBytes"
- }
- }
-
- if {[stream set $::chassis $::card $::port1 $streamId]} {
- errorMsg "Error calling stream set $::chassis $::card $::port1 $streamId"
- }
-
- incr streamId
- streamRegion generateWarningList $::chassis $::card $::port1
- ixWriteConfigToHardware portList -noProtocolServer
-
- if {[packetGroup getRx $::chassis $::card $::port2]} {
- errorMsg "Error calling packetGroup getRx $::chassis $::card $::port2"
- }
-
- ##################################################
- ######### Traffic Transmit and Results ###########
- ##################################################
-
- # Transmit traffic
-
- logMsg "Clearing stats for all ports"
- ixClearStats portList
-
- logMsg "Starting packet groups on port $::port2"
- ixStartPortPacketGroups $::chassis $::card $::port2
-
- logMsg "Starting Capture on port $::port2"
- ixStartPortCapture $::chassis $::card $::port2
-
- logMsg "Starting transmit on port $::port1"
- ixStartPortTransmit $::chassis $::card $::port1
-
- # If duration=0 is passed, exit after starting transmit
-
- if {$duration == 0} {
- logMsg "Sending traffic until interrupted"
- return
- }
-
- logMsg "Waiting for $duration ms"
-
- # Wait for duration - 1 second to get traffic rate
-
- after [expr "$duration - 1"]
-
- # Get result
-
- set result [stopTraffic]
-
- if {$streamType == "contPacket"} {
- return $result
- } elseif {$streamType == "stopStream"} {
- set payError 0
- set seqError 0
- set captureLimit 3000
-
- # explode results from 'stopTraffic' for ease of use later
- set framesSent [lindex $result 0]
- set framesRecv [lindex $result 1]
- set bytesSent [lindex $result 2]
- set bytesRecv [lindex $result 3]
-
- if {$framesSent <= $captureLimit} {
- captureBuffer get $::chassis $::card $::port2 1 $framesSent
- set capturedFrames [captureBuffer cget -numFrames]
-
- set notCaptured [expr "$framesRecv - $capturedFrames"]
- if {$notCaptured != 0} {
- errorMsg "'$notCaptured' frames were not captured"
- }
-
- if {$proto == "tcp"} {
- for {set z 1} {$z <= $capturedFrames} {incr z} {
- captureBuffer getframe $z
- set capFrame [captureBuffer cget -frame]
- regsub -all " " $capFrame "" frameNoSpaces
- set frameNoSpaces
-
- set startPayload 108
- set endPayload [expr "[expr "$frameSize * 2"] - 9"]
- set payload [string range $frameNoSpaces $startPayload $endPayload]
-
- if {$vlanEnabled != 1} {
- set startSequence 76
- set endSequence 83
- set sequence [string range $frameNoSpaces $startSequence $endSequence]
- scan $sequence %x seqDecimal
- set seqDecimal
- if {"$payload" != $::payloadLookup($frameSize)} {
- errorMsg "frame '$z' payload: invalid payload"
- incr payError
- }
- # variable z increments from 1 to total number of packets
- # captured TCP sequence numbers start at 0, not 1. When
- # comparing sequence numbers for captured frames, reduce
- # variable z by 1 i.e. frame 1 with sequence 0 is compared
- # to expected sequence 0.
- if {$seqDecimal != $z-1} {
- errorMsg "frame '$z' sequence number: Found '$seqDecimal'. Expected '$z'"
- incr seqError
- }
- }
- }
- }
- logMsg "Sequence Errors: $seqError"
- logMsg "Payload Errors: $payError\n"
- } else {
- errorMsg "Too many packets for capture."
- }
-
- set result [list $framesSent $framesRecv $bytesSent $bytesRecv $payError $seqError]
- return $result
- } else {
- errorMsg "streamtype is not supported: '$streamType'"
- }
-}
-
-proc stopTraffic {} {
- # Stop sending traffic from IXIA.
- #
- # Stops Transmit of traffic from Rx port.
- #
- # Returns:
- # Output from Rx end of Ixia.
-
- ##################################################
- ################# Initialisation #################
- ##################################################
-
- # Configure global variables. See documentation on 'global' for more
- # information on why this is necessary
- # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
- global portList
-
- ##################################################
- ####### Stop Traffic Transmit and Results ########
- ##################################################
-
- # Read frame rate of transmission
-
- if {[stat getRate statAllStats $::chassis $::card $::port1]} {
- errorMsg "Error reading stat rate on port $::chassis $::card $::port1"
- return $::TCL_ERROR
- }
-
- set sendRate [stat cget -framesSent]
- set sendRateBytes [stat cget -bytesSent]
-
- if {[stat getRate statAllStats $::chassis $::card $::port2]} {
- errorMsg "Error reading stat rate on port $::chassis $::card $::port2"
- return $::TCL_ERROR
- }
-
- set recvRate [stat cget -framesReceived]
- set recvRateBytes [stat cget -bytesReceived]
-
- # Wait for a second, else we get funny framerate statistics
- after 1
-
- # Stop transmission of traffic
- ixStopTransmit portList
-
- if {[ixCheckTransmitDone portList] == $::TCL_ERROR} {
- return -code error
- } else {
- logMsg "Transmission is complete.\n"
- }
-
- ixStopPacketGroups portList
- ixStopCapture portList
-
- # Get statistics
-
- if {[stat get statAllStats $::chassis $::card $::port1]} {
- errorMsg "Error reading stat on port $::chassis $::card $::port1"
- return $::TCL_ERROR
- }
-
- set bytesSent [stat cget -bytesSent]
- set framesSent [stat cget -framesSent]
-
- if {[stat get statAllStats $::chassis $::card $::port2]} {
- errorMsg "Error reading stat on port $::chassis $::card $::port2"
- return $::TCL_ERROR
- }
-
- set bytesRecv [stat cget -bytesReceived]
- set framesRecv [stat cget -framesReceived]
-
- set bytesDropped [expr "$bytesSent - $bytesRecv"]
- set framesDropped [expr "$framesSent - $framesRecv"]
-
- logMsg "Frames Sent: $framesSent"
- logMsg "Frames Recv: $framesRecv"
- logMsg "Frames Dropped: $framesDropped\n"
-
- logMsg "Bytes Sent: $bytesSent"
- logMsg "Bytes Recv: $bytesRecv"
- logMsg "Bytes Dropped: $bytesDropped\n"
-
- logMsg "Frame Rate Sent: $sendRate"
- logMsg "Frame Rate Recv: $recvRate\n"
-
- set result [list $framesSent $framesRecv $bytesSent $bytesRecv $sendRate $recvRate $sendRateBytes $recvRateBytes]
-
- return $result
-}
-
-proc rfcThroughputTest { testSpec trafficSpec } {
- # Execute RFC tests from IXIA.
- #
- # Wraps the sendTraffic proc, repeatedly calling it, storing the result and
- # performing an iterative binary search to find the highest possible RFC
- # transmission rate. Abides by the specification of RFC2544 as given by the
- # IETF:
- #
- # https://www.ietf.org/rfc/rfc2544.txt
- #
- # Parameters:
- # testSpec - a dict detailing how the test should be run. Should be
- # of format:
- # {numtrials, duration, lossrate}
- # trafficSpec - a dict describing the packet to be sent. Should be
- # of format:
- # { l2, l3}
- # where each item is in turn a dict detailing the configuration of each
- # layer of the packet
- # Returns:
- # Highest rate with acceptable packet loss.
-
- ##################################################
- ################# Initialisation #################
- ##################################################
-
- # Configure global variables. See documentation on 'global' for more
- # information on why this is necessary
- # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
- global portList
-
- # Extract the provided dictionaries to local variables to simplify the
- # rest of the script
-
- # testSpec
-
- # RFC2544 to IXIA terminology mapping (it affects Ixia configuration below):
- # Test => Trial
- # Trial => Iteration
- set numTrials [dict get $testSpec tests] ;# we don't use this yet
- set duration [dict get $testSpec duration]
- set lossRate [dict get $testSpec lossrate]
- set multipleStream [dict get $testSpec multipleStreams] ;# we don't use this yet
-
- # variables used for binary search of results
- set min 1
- set max 100
- set diff [expr "$max - $min"]
-
- set result [list 0 0 0 0 0 0 0 0] ;# best result found so far
- set percentRate 100 ;# starting throughput percentage rate
-
- ##################################################
- ######### Traffic Transmit and Results ###########
- ##################################################
-
- # iterate a maximum of 20 times, sending packets at a set rate to
- # find fastest possible rate with acceptable packetloss
- #
- # As a reminder, the binary search works something like this:
- #
- # percentRate < idealValue --> min = percentRate
- # percentRate > idealValue --> max = percentRate
- # percentRate = idealValue --> max = min = percentRate
- #
- for {set i 0} {$i < 20} {incr i} {
- dict set flowSpec type "contPacket"
- dict set flowSpec numpkts 100 ;# this can be bypassed
- dict set flowSpec duration $duration
- dict set flowSpec framerate $percentRate
-
- set flowStats [sendTraffic $flowSpec $trafficSpec]
-
- # explode results from 'sendTraffic' for ease of use later
- set framesSent [lindex $flowStats 0]
- set framesRecv [lindex $flowStats 1]
- set sendRate [lindex $flowStats 4]
-
- set framesDropped [expr "$framesSent - $framesRecv"]
- if {$framesSent > 0} {
- set framesDroppedRate [expr "double($framesDropped) / $framesSent"]
- } else {
- set framesDroppedRate 100
- }
-
- # check if we've already found the rate before 10 iterations, i.e.
- # 'percentRate = idealValue'. This is as accurate as we can get with
- # integer values.
- if {[expr "$max - $min"] <= 0.5 } {
- break
- }
-
- # handle 'percentRate <= idealValue' case
- if {$framesDroppedRate <= $lossRate} {
- logMsg "Frame sendRate of '$sendRate' pps succeeded ('$framesDropped' frames dropped)"
-
- set result $flowStats
- set min $percentRate
-
- set percentRate [expr "$percentRate + ([expr "$max - $min"] * 0.5)"]
- # handle the 'percentRate > idealValue' case
- } else {
- if {$framesDropped == $framesSent} {
- errorMsg "Dropped all frames!"
- }
-
- errorMsg "Frame sendRate of '$sendRate' pps failed ('$framesDropped' frames dropped)"
-
- set max $percentRate
- set percentRate [expr "$percentRate - ([expr "$max - $min"] * 0.5)"]
- }
- }
-
- set bestRate [lindex $result 4]
-
- logMsg "$lossRate% packet loss rate: $bestRate"
-
- return $result
-}