aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rwxr-xr-xdocs/userguide/integration.rst328
1 files changed, 327 insertions, 1 deletions
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index eccd0c76..e45f2dc1 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -71,7 +71,7 @@ test step calls returns a value it can be later recalled, for example:
]
}
-This test profile uses the the vswitch add_vport method which returns a string
+This test profile uses the vswitch add_vport method which returns a string
value of the port added. This is later called by the del_port method using the
name from step 1.
@@ -103,6 +103,332 @@ This profile can then be used inside other testcases
STEP_VSWITCH_PVP_FINIT
}
+HelloWorld and other basic Testcases
+------------------------------------
+
+The following examples are for demonstration purposes.
+You can run them by copying and pasting into the
+conf/integration/01_testcases.conf file.
+A command-line instruction is shown at the end of each
+example.
+
+HelloWorld
+^^^^^^^^^^
+
+The first example is a HelloWorld testcase.
+It simply creates a bridge with 2 physical ports, then sets up a flow to drop
+incoming packets from the port that was instantiated at the STEP #1.
+There's no interaction with the traffic generator.
+Then the flow, the 2 ports and the bridge are deleted.
+'add_phy_port' method creates a 'dpdk' type interface that will manage the
+physical port. The string value returned is the port name that will be referred
+by 'del_port' later on.
+
+.. code-block:: python
+
+ {
+ "Name": "HelloWorld",
+ "Description": "My first testcase",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['drop'], 'idle_timeout': '0'}],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+
+ }
+
+To run HelloWorld test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration HelloWorld
+
+Specify a Flow by the IP address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The next example shows how to explicitly set up a flow by specifying a
+destination IP address.
+All packets received from the port created at STEP #1 that have a destination
+IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2.
+
+.. code-block:: python
+
+ {
+ "Name": "p2p_rule_l3da",
+ "Description": "Phy2Phy with rule on L3 Dest Addr",
+ "Deployment": "clean",
+ "biDirectional": "False",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous'}],
+ ['vswitch', 'dump_flows', 'int_br0'], # STEP 5
+ ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration p2p_rule_l3da
+
+Multistream feature
+^^^^^^^^^^^^^^^^^^^
+
+The next testcase uses the multistream feature.
+The traffic generator will send packets with different UDP ports.
+That is accomplished by using "Stream Type" and "MultiStream" keywords.
+4 different flows are set to forward all incoming packets.
+
+.. code-block:: python
+
+ {
+ "Name": "multistream_l4",
+ "Description": "Multistream on UDP ports",
+ "Deployment": "clean",
+ "Stream Type": "L4",
+ "MultiStream": 4,
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Send mono-dir traffic
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration multistream_l4
+
+PVP with a VM Replacement
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This example launches a 1st VM in a PVP topology, then the VM is replaced
+by another VM.
+When VNF setup parameter in ./conf/04_vnf.conf is "QemuDpdkVhostUser"
+'add_vport' method creates a 'dpdkvhostuser' type port to connect a VM.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_replace_vm",
+ "Description": "PVP with VM replacement",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \
+ 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \
+ 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
+
+ # Start VM 1
+ ['vnf1', 'start'],
+ # Now we want to replace VM 1 with another VM
+ ['vnf1', 'stop'],
+
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 12
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+
+ # Start VM 2
+ ['vnf2', 'start'],
+ ['vnf2', 'stop'],
+ ['vswitch', 'dump_flows', 'int_br0'],
+
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm2
+ ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration ex_replace_vm
+
+VM with a Linux bridge
+^^^^^^^^^^^^^^^^^^^^^^
+
+In this example a command-line parameter allows to set up a Linux bridge into
+the guest VM.
+That's one of the available ways to specify the guest application.
+Packets matching the flow will be forwarded to the VM.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_pvp_rule_l3da",
+ "Description": "PVP with flow on L3 Dest Addr",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ # Each pkt from the VM is forwarded to the 2nd dpdk port
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Start VMs
+ ['vnf1', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ ['vnf1', 'stop'],
+ # Clean up
+ ['vswitch', 'dump_flows', 'int_br0'], # STEP 10
+ ['vswitch', 'del_flow', 'int_br0'], # STEP 11
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --test-params
+ "guest_loopback=linux_bridge" --integration ex_pvp_rule_l3da
+
+Forward packets based on UDP port
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This examples launches 2 VMs connected in parallel.
+Incoming packets will be forwarded to one specific VM depending on the
+destination UDP port.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_2pvp_rule_l4dp",
+ "Description": "2 PVP with flows on L4 Dest Port",
+ "Deployment": "clean",
+ "Stream Type": "L4", # loop UDP ports
+ "MultiStream": 2,
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 5 vm2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 6
+ # Setup Flows to reply ICMPv6 and similar packets, so to
+ # avoid flooding internal port with their re-transmissions
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:01', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:02', \
+ 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:03', \
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:04', \
+ 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
+ # Forward UDP packets depending on dest port
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ # Send VM output to phy port #2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Start VMs
+ ['vnf1', 'start'], # STEP 16
+ ['vnf2', 'start'], # STEP 17
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'], # vm2 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration ex_2pvp_rule_l4dp
+
Executing Tunnel encapsulation tests
------------------------------------