summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/configguide/trafficgen.rst2
-rw-r--r--docs/design/trafficgen_integration_guide.rst3
-rw-r--r--docs/userguide/teststeps.rst16
-rwxr-xr-xdocs/userguide/testusage.rst9
4 files changed, 18 insertions, 12 deletions
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index efcc4d83..0431b34f 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -113,7 +113,7 @@ when the setup is complete.
"proto": "tcp",
"dstip": "90.90.90.90"
},
- "traffic_type": "continuous",
+ "traffic_type": "rfc2544_continuous",
"multistream": 0,
"bidir": "True",
"vlan": {
diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst
index 266c6bc0..9bb0e825 100644
--- a/docs/design/trafficgen_integration_guide.rst
+++ b/docs/design/trafficgen_integration_guide.rst
@@ -196,7 +196,8 @@ functions:
which are discussed in detail at `integration tests userguide`_
* param **traffic_type**: One of the supported traffic types,
- e.g. **rfc2544**, **continuous** or **back2back**.
+ e.g. **rfc2544_throughput**, **rfc2544_continuous**
+ or **rfc2544_back2back**.
* param **frame_rate**: Defines desired percentage of frame
rate used during continuous stream tests. It can be set by test
parameter iLoad or by CLI parameter iload.
diff --git a/docs/userguide/teststeps.rst b/docs/userguide/teststeps.rst
index 65a25b0a..c00a2749 100644
--- a/docs/userguide/teststeps.rst
+++ b/docs/userguide/teststeps.rst
@@ -122,9 +122,9 @@ of supported objects and their most common functions follows:
.. code-block:: python
- ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput'}]
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput'}]
- ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}]
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', 'bidir' : 'True'}]
* ``settings`` - reads or modifies VSPERF configuration
@@ -344,7 +344,8 @@ IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2.
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous'}],
+ ['trafficgen', 'send_traffic', \
+ {'traffic_type' : 'rfc2544_continuous'}],
['vswitch', 'dump_flows', 'int_br0'], # STEP 5
['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
@@ -393,7 +394,8 @@ That is accomplished by using "Stream Type" and "MultiStream" keywords.
'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \
'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
# Send mono-dir traffic
- ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ ['trafficgen', 'send_traffic', \
+ {'traffic_type' : 'rfc2544_continuous', \
'bidir' : 'False'}],
# Clean up
['vswitch', 'del_flow', 'int_br0'],
@@ -505,7 +507,8 @@ loopback application by a configuration option ``GUEST_LOOPBACK``.
'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
# Start VMs
['vnf1', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ ['trafficgen', 'send_traffic', \
+ {'traffic_type' : 'rfc2544_continuous', \
'bidir' : 'False'}],
['vnf1', 'stop'],
# Clean up
@@ -578,7 +581,8 @@ destination UDP port.
# Start VMs
['vnf1', 'start'], # STEP 16
['vnf2', 'start'], # STEP 17
- ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ ['trafficgen', 'send_traffic', \
+ {'traffic_type' : 'rfc2544_continuous', \
'bidir' : 'False'}],
['vnf1', 'stop'],
['vnf2', 'stop'],
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index f446f261..46413f03 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -674,9 +674,10 @@ Supported CLI options useful for traffic generator configuration are:
.. code-block:: console
- 'traffic_type' - One of the supported traffic types. E.g. rfc2544,
- back2back or continuous
- Default value is "rfc2544".
+ 'traffic_type' - One of the supported traffic types. E.g.
+ rfc2544_throughput,
+ rfc2544_back2back or rfc2544_continuous
+ Default value is "rfc2544_throughput".
'bidirectional' - Specifies if generated traffic will be full-duplex (true)
or half-duplex (false)
Default value is "false".
@@ -697,7 +698,7 @@ Example of execution of VSPERF in "trafficgen" mode:
.. code-block:: console
$ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \
- --test-params "traffic_type=continuous;bidirectional=True;iload=60"
+ --test-params "traffic_type=rfc2544_continuous;bidirectional=True;iload=60"
Code change verification by pylint
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^