aboutsummaryrefslogtreecommitdiffstats
path: root/docs/userguide
diff options
context:
space:
mode:
Diffstat (limited to 'docs/userguide')
-rwxr-xr-xdocs/userguide/integration.rst1
-rwxr-xr-xdocs/userguide/testusage.rst62
2 files changed, 61 insertions, 2 deletions
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index 27bf2cd0..db9fdd0b 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -90,7 +90,6 @@ To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
.. code-block:: python
VSWITCH = 'OvsVanilla'
- VSWITCH_VANILLA_PHY_PORT_NAMES = ['nic1name', 'nic2name']
# Specify vport_* kernel module to test.
VSWITCH_VANILLA_KERNEL_MODULES = ['vport_vxlan',
'vport_gre',
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index ac46ba3f..233f7015 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -199,7 +199,6 @@ for Vanilla OVS:
.. code-block:: console
VSWITCH = 'OvsVanilla'
- VSWITCH_VANILLA_PHY_PORT_NAMES = ['$PORT1', '$PORT2']
Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind
to the vswitch.
@@ -309,6 +308,8 @@ To run tests using Vanilla OVS:
$ ./vsperf --conf-file<path_to_custom_conf>/10_custom.conf
+.. _vfio-pci:
+
Using vfio_pci with DPDK
^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -346,6 +347,65 @@ To check that IOMMU is enabled on your platform:
[ 3.335746] IOMMU: dmar1 using Queued invalidation
....
+.. _SRIOV-support:
+
+Using SRIOV support
+^^^^^^^^^^^^^^^^^^^
+
+To use virtual functions of NIC with SRIOV support, use extended form
+of NIC PCI slot definition:
+
+.. code-block:: python
+
+ WHITELIST_NICS = ['0000:05:00.0|vf0', '0000:05:00.1|vf3']
+
+Where 'vf' is an indication of virtual function usage and following
+number defines a VF to be used. In case that VF usage is detected,
+then vswitchperf will enable SRIOV support for given card and it will
+detect PCI slot numbers of selected VFs.
+
+So in example above, one VF will be configured for NIC '0000:05:00.0'
+and four VFs will be configured for NIC '0000:05:00.1'. Vswitchperf
+will detect PCI addresses of selected VFs and it will use them during
+test execution.
+
+At the end of vswitchperf execution, SRIOV support will be disabled.
+
+SRIOV support is generic and it can be used in different testing scenarios.
+For example:
+
+* vSwitch tests with DPDK or without DPDK support to verify impact
+ of VF usage on vSwitch performance
+* tests without vSwitch, where traffic is forwared directly
+ between VF interfaces by packet forwarder (e.g. testpmd application)
+* tests without vSwitch, where VM accesses VF interfaces directly
+ by PCI-passthrough_ to measure raw VM throughput performance.
+
+.. _PCI-passthrough:
+
+Using QEMU with PCI passthrough support
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Raw virtual machine throughput performance can be measured by execution of PVP
+test with direct access to NICs by PCI passthrough. To execute VM with direct
+access to PCI devices, enable vfio-pci_. In order to use virtual functions,
+SRIOV-support_ must be enabled.
+
+Execution of test with PCI passthrough with vswitch disabled:
+
+.. code-block:: console
+
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
+ --vswtich none --vnf QemuPciPassthrough pvp_tput
+
+Any of supported guest-loopback-application_ can be used inside VM with
+PCI passthrough support.
+
+Note: Qemu with PCI passthrough support can be used only with PVP test
+deployment.
+
+.. _guest-loopback-application:
+
Selection of loopback application for PVP and PVVP tests
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^