diff options
Diffstat (limited to 'docs/to-be-reorganized')
| -rw-r--r-- | docs/to-be-reorganized/quickstart.rst | 59 |
1 files changed, 56 insertions, 3 deletions
diff --git a/docs/to-be-reorganized/quickstart.rst b/docs/to-be-reorganized/quickstart.rst index bb009fce..bcf0f7c2 100644 --- a/docs/to-be-reorganized/quickstart.rst +++ b/docs/to-be-reorganized/quickstart.rst @@ -4,9 +4,13 @@ Getting Started with 'vsperf' Hardware Requirements --------------------- -VSPERF requires the following hardware to run tests: IXIA traffic -generator (IxNetwork), a machine that runs the IXIA client software and -a CentOS Linux release 7.1.1503 (Core) host. +VSPERF requires one of the following traffic generators to run tests: + +- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA client software +- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual in a VM) and a +VM to run the Spirent Virtual Deployment Service image, formerly known as "Spirent LabServer". + +Both test configurations, above, also require a CentOS Linux release 7.1.1503 (Core) host. vSwitch Requirements -------------------- @@ -41,6 +45,55 @@ need it for the 10\_custom.conf file). Hit Ok and start the TCL server application +Spirent Setup +------------- + +Spirent installation files and instructions are available on the +Spirent support website at: + +http://support.spirent.com + +Select a version of Spirent TestCenter software to utilize. This example +will use Spirent TestCenter v4.57 as an example. Substitute the appropriate +version in place of 'v4.57' in the examples, below. + +On the CentOS 7 System +~~~~~~~~~~~~~~~~~~~~~~ + +Download and install the following: + +Spirent TestCenter Application, v4.57 for 64-bit Linux Client + +Spirent Virtual Deployment Service (VDS) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Spirent VDS is required for both TestCenter hardware and virtual +chassis in the vsperf environment. For installation, select the version +that matches the Spirent TestCenter Application version. For v4.57, +the matching VDS version is 1.0.55. Download either the ova (VMware) +or qcow2 (QEMU) image and create a VM with it. Initialize the VM +according to Spirent installation instructions. + +Using Spirent TestCenter Virtual (STCv) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +STCv is available in both ova (VMware) and qcow2 (QEMU) formats. For +VMware, download: + +Spirent TestCenter Virtual Machine for VMware, v4.57 for Hypervisor - VMware ESX.ESXi + +Virtual test port performance is affected by the hypervisor configuration. For +best practice results in deploying STCv, the following is suggested: + +- Create a single VM with two test ports rather than two VMs with one port each +- Set STCv in DPDK mode +- Give STCv 2*n + 1 cores, where n = the number of ports. For vsperf, cores = 5. +- Turning off hyperthreading and pinning these cores will improve performance +- Give STCv 2 GB of RAM + +To get the highest performance and accuracy, Spirent TestCenter hardware is +recommended. vsperf can run with either stype test ports. + Cloning and building src dependencies ------------------------------------- |