summaryrefslogtreecommitdiffstats
path: root/docs/to-be-reorganized/vswitchperf_ltd.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/to-be-reorganized/vswitchperf_ltd.rst')
-rwxr-xr-x[-rw-r--r--]docs/to-be-reorganized/vswitchperf_ltd.rst204
1 files changed, 107 insertions, 97 deletions
diff --git a/docs/to-be-reorganized/vswitchperf_ltd.rst b/docs/to-be-reorganized/vswitchperf_ltd.rst
index 321ae418..4e194d0c 100644..100755
--- a/docs/to-be-reorganized/vswitchperf_ltd.rst
+++ b/docs/to-be-reorganized/vswitchperf_ltd.rst
@@ -150,9 +150,9 @@ switch, the tests will be broken down into the following categories:
packet and frame delay for constant loads.
- **Stream Performance Tests** (TCP, UDP) to measure bulk data transfer
performance, i.e. how fast systems can send and receive data through
- the switch.
+ the virtual switch.
- **Request/Response Performance** Tests (TCP, UDP) the measure the
- transaction rate through the switch.
+ transaction rate through the virtual switch.
- **Packet Delay Tests** to understand latency distribution for
different packet sizes and over an extended test run to uncover
outliers.
@@ -502,7 +502,7 @@ with non default parameters will be stated explicitly**.
**Note**: For throughput tests unless stated otherwise, test
configurations should ensure that traffic traverses the installed flows
-through the switch, i.e. flows are installed and have an appropriate
+through the virtual switch, i.e. flows are installed and have an appropriate
time out that doesn't expire before packet transmission starts.
2.2.3.2 Flow Classification
@@ -804,7 +804,7 @@ platform should be configured for every test after this
(# of vCPUs, vNICs, Memory, affinitization…) is how it should be
configured for every test that uses a VNF after this.
-2.2.4 RFCs for testing switch performance
+2.2.4 RFCs for testing virtual switch performance
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The starting point for defining the suite of tests for benchmarking the
@@ -850,7 +850,7 @@ Types of tests are:
network’s ability to support real-time applications in which a
large amount of frame loss will rapidly degrade service quality.
-4. Burst test assesses the buffering capability of a switch. It
+4. Burst test assesses the buffering capability of a virtual switch. It
measures the maximum number of frames received at full line rate
before a frame is lost. In carrier Ethernet networks, this
measurement validates the excess information rate (EIR) as defined in
@@ -1501,90 +1501,6 @@ Test ID: LTD.Throughput.RFC2889.ForwardPressure
- Physical → virtual switch → physical.
-Test ID: LTD.Throughput.RFC2889.AddressCachingCapacity
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- **Title**: RFC2889 Address Caching Capacity Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- Please note this test is only applicable to switches that are capable of
- MAC learning. The aim of this test is to determine the address caching
- capacity of the DUT for a constant load (fixed length frames at a fixed
- interval time). The selected frame sizes are those previously defined
- under `Default Test Parameters <#DefaultParams>`__.
-
- In order to run this test the aging time, that is the maximum time the
- DUT will keep a learned address in its flow table, and a set of initial
- addresses, whose value should be >= 1 and <= the max number supported by
- the implementation must be known. Please note that if the aging time is
- configurable it must be longer than the time necessary to produce frames
- from the external source at the specified rate. If the aging time is
- fixed the frame rate must be brought down to a value that the external
- source can produce in a time that is less than the aging time.
-
- Learning Frames should be sent from an external source to the DUT to
- install a number of flows. The Learning Frames must have a fixed
- destination address and must vary the source address of the frames. The
- DUT should install flows in its flow table based on the varying source
- addresses. Frames should then be transmitted from an external source at
- a suitable frame rate to see if the DUT has properly learned all of the
- addresses. If there is no frame loss and no flooding, the number of
- addresses sent to the DUT should be increased and the test is repeated
- until the max number of cached addresses supported by the DUT
- determined.
-
- **Expected Result**:
-
- **Metrics collected**:
-
- The following are the metrics collected for this test:
-
- - Number of cached addresses supported by the DUT.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → 2 x physical (one receiving, one listening).
-
-Test ID: LTD.Throughput.RFC2889.AddressLearningRate
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- **Title**: RFC2889 Address Learning Rate Test
-
- **Prerequisite Test**: LTD.Memory.RFC2889.AddressCachingCapacity
-
- **Priority**:
-
- **Description**:
-
- Please note this test is only applicable to switches that are capable of
- MAC learning. The aim of this test is to determine the rate of address
- learning of the DUT for a constant load (fixed length frames at a fixed
- interval time). The selected frame sizes are those previously defined
- under `Default Test Parameters <#DefaultParams>`__, traffic should be
- sent with each IPv4/IPv6 address incremented by one. The rate at which
- the DUT learns a new address should be measured. The maximum caching
- capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken
- into consideration as the maximum number of addresses for which the
- learning rate can be obtained.
-
- **Expected Result**: It may be worthwhile to report the behaviour when
- operating beyond address capacity - some DUTs may be more friendly to
- new addresses than others.
-
- **Metrics collected**:
-
- The following are the metrics collected for this test:
-
- - The address learning rate of the DUT.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → 2 x physical (one receiving, one listening).
Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -1698,8 +1614,8 @@ Test ID: LTD.PacketLatency.InitialPacketProcessingLatency
plus 10%. Average packet latency will be determined over 1,000,000
packets.
- This test is intended only for non-learning switches; For learning
- switches use RFC2889.
+ This test is intended only for non-learning virtual switches; For learning
+ virtual switches use RFC2889.
For this test, only unidirectional traffic is required.
@@ -1844,6 +1760,97 @@ Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability
- The DUT's 0% packet loss throughput in the presence of cache sharing and memory bandwidth between processes.
+2.3.4 Activation tests
+~~~~~~~~~~~~~~~~~~~~~~~~
+The general aim of these tests is to understand the capacity of the
+and speed with which the vswitch can accomodate new flows.
+
+Test ID: LTD.Activation.RFC2889.AddressCachingCapacity
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ **Title**: RFC2889 Address Caching Capacity Test
+
+ **Prerequisite Test**: N/A
+
+ **Priority**:
+
+ **Description**:
+
+ Please note this test is only applicable to virtual switches that are capable of
+ MAC learning. The aim of this test is to determine the address caching
+ capacity of the DUT for a constant load (fixed length frames at a fixed
+ interval time). The selected frame sizes are those previously defined
+ under `Default Test Parameters <#DefaultParams>`__.
+
+ In order to run this test the aging time, that is the maximum time the
+ DUT will keep a learned address in its flow table, and a set of initial
+ addresses, whose value should be >= 1 and <= the max number supported by
+ the implementation must be known. Please note that if the aging time is
+ configurable it must be longer than the time necessary to produce frames
+ from the external source at the specified rate. If the aging time is
+ fixed the frame rate must be brought down to a value that the external
+ source can produce in a time that is less than the aging time.
+
+ Learning Frames should be sent from an external source to the DUT to
+ install a number of flows. The Learning Frames must have a fixed
+ destination address and must vary the source address of the frames. The
+ DUT should install flows in its flow table based on the varying source
+ addresses. Frames should then be transmitted from an external source at
+ a suitable frame rate to see if the DUT has properly learned all of the
+ addresses. If there is no frame loss and no flooding, the number of
+ addresses sent to the DUT should be increased and the test is repeated
+ until the max number of cached addresses supported by the DUT
+ determined.
+
+ **Expected Result**:
+
+ **Metrics collected**:
+
+ The following are the metrics collected for this test:
+
+ - Number of cached addresses supported by the DUT.
+ - CPU and memory utilization may also be collected as part of this
+ test, to determine the vSwitch's performance footprint on the system.
+
+ **Deployment scenario**:
+
+ - Physical → virtual switch → 2 x physical (one receiving, one listening).
+
+Test ID: LTD.Activation.RFC2889.AddressLearningRate
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ **Title**: RFC2889 Address Learning Rate Test
+
+ **Prerequisite Test**: LTD.Memory.RFC2889.AddressCachingCapacity
+
+ **Priority**:
+
+ **Description**:
+
+ Please note this test is only applicable to virtual switches that are capable of
+ MAC learning. The aim of this test is to determine the rate of address
+ learning of the DUT for a constant load (fixed length frames at a fixed
+ interval time). The selected frame sizes are those previously defined
+ under `Default Test Parameters <#DefaultParams>`__, traffic should be
+ sent with each IPv4/IPv6 address incremented by one. The rate at which
+ the DUT learns a new address should be measured. The maximum caching
+ capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken
+ into consideration as the maximum number of addresses for which the
+ learning rate can be obtained.
+
+ **Expected Result**: It may be worthwhile to report the behaviour when
+ operating beyond address capacity - some DUTs may be more friendly to
+ new addresses than others.
+
+ **Metrics collected**:
+
+ The following are the metrics collected for this test:
+
+ - The address learning rate of the DUT.
+
+ **Deployment scenario**:
+
+ - Physical → virtual switch → 2 x physical (one receiving, one listening).
+
+
2.3.5 Coupling between control path and datapath Tests
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following tests aim to determine how tightly coupled the datapath
@@ -1897,7 +1904,7 @@ Test ID: LTD.CPDPCouplingFlowAddition
- Physical → virtual switch → physical.
-2.3.4 CPU and memory consumption
+2.3.6 CPU and memory consumption
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following tests will profile a virtual switch's CPU and memory
utilization under various loads and circumstances. The following
@@ -1936,7 +1943,7 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss
- The configuration of the stress tool (for example the command line
parameters used to start it.)
-2.3.9 Summary List of Tests
+2.3.7 Summary List of Tests
~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. Throughput tests
@@ -1950,8 +1957,6 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss
- Test ID: LTD.Throughput.RFC6201.ResetTime
- Test ID: LTD.Throughput.RFC2889.MaxForwardingRate
- Test ID: LTD.Throughput.RFC2889.ForwardPressure
- - Test ID: LTD.Throughput.RFC2889.AddressCachingCapacity
- - Test ID: LTD.Throughput.RFC2889.AddressLearningRate
- Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering
- Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding
@@ -1965,10 +1970,15 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss
- Test ID: LTD.Scalability.RFC2544.0PacketLoss
- Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability
-4. Coupling between control path and datapath Tests
+4. Acivation tests
+
+ - Test ID: LTD.Activation.RFC2889.AddressCachingCapacity
+ - Test ID: LTD.Activation.RFC2889.AddressLearningRate
+
+5. Coupling between control path and datapath Tests
- Test ID: LTD.CPDPCouplingFlowAddition
-5. CPU and memory consumption
+6. CPU and memory consumption
- Test ID: LTD.CPU.RFC2544.0PacketLoss