aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user')
-rw-r--r--docs/testing/user/configguide/trafficgen.rst23
1 files changed, 23 insertions, 0 deletions
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst
index 33824486..061d3d7a 100644
--- a/docs/testing/user/configguide/trafficgen.rst
+++ b/docs/testing/user/configguide/trafficgen.rst
@@ -795,6 +795,13 @@ It is neccesary for proper connection between Trex server and VSPERF.
Firewall must allow a connection from DUT (VSPERF) to the T-Rex server running
at TCP port 4501.
+**NOTE:** For high speed cards it may be advantageous to start T-Rex with more transmit queues/cores.
+
+.. code-block:: console
+
+ cd trex-cores/scripts/
+ ./t-rex-64 -i -c 10
+
For additional information about Trex stateless mode see Trex stateless documentation:
https://trex-tgn.cisco.com/trex/doc/trex_stateless.html
@@ -862,6 +869,22 @@ modified. Enable Promiscuous mode when doing multistream at layer 2 testing with
TRAFFICGEN_TREX_PROMISCUOUS=True
+Card Bandwidth Options
+~~~~~~~~~~~~~~~~~~~~~~
+
+T-Rex API will attempt to retrieve the highest possible speed from the card using internal
+calls to port information. If you are using two separate cards then it will take the lowest
+of the two cards as the max speed. If necessary you can try to force the API to use a
+specific maximum speed per port. The below configurations can be adjusted to enable this.
+
+.. code-block:: console
+
+ TRAFFICGEN_TREX_FORCE_PORT_SPEED = True
+ TRAFFICGEN_TREX_PORT_SPEED = 40000 # 40 gig
+
+**Note::** Setting higher than possible speeds will result in unpredictable behavior when running
+tests such as duration inaccuracy and/or complete test failure.
+
RFC2544 Validation
~~~~~~~~~~~~~~~~~~