5 files changed, 19 insertions, 12 deletions
diff --git a/docs/testing/user/configguide/installation.rst b/docs/testing/user/configguide/installation.rst
index 0a98c945..8bad4efd 100644
--- a/docs/testing/user/configguide/installation.rst
+++ b/docs/testing/user/configguide/installation.rst
@@ -63,6 +63,7 @@ The vSwitch must support Open Flow 1.3 or greater.
 * Open vSwitch
 * Open vSwitch with DPDK support
 * TestPMD application from DPDK (supports p2p and pvp scenarios)
+* Cisco VPP
 
 Supported Hypervisors
 ---------------------
@@ -342,7 +343,7 @@ following location:
 
 http://www.tuned-project.org/2017/04/27/tuned-2-8-0-released/
 
-Follow instructions to install the latest tuned-adm onto your system. For
+Follow the instructions to install the latest tuned-adm onto your system. For
 current RHEL customers you should already have the most current version. You
 just need to install the cpu-partitioning profile.
 
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst
index 7caa501e..4b9eec6e 100644
--- a/docs/testing/user/configguide/trafficgen.rst
+++ b/docs/testing/user/configguide/trafficgen.rst
@@ -248,7 +248,7 @@ Ixia
 ----
 
 VSPERF can use both IxNetwork and IxExplorer TCL servers to control Ixia chassis.
-However usage of IxNetwork TCL server is a preferred option. Following sections
+However, usage of IxNetwork TCL server is a preferred option. The following sections
 will describe installation and configuration of IxNetwork components used by VSPERF.
 
 Installation
@@ -675,11 +675,15 @@ https://github.com/emmericp/MoonGen
 For VSPERF use, MoonGen should be cloned from here (as opposed to the
 previously mentioned GitHub):
 
-git clone https://github.com/atheurer/lua-trafficgen
+.. code-block:: console
+
+    git clone https://github.com/atheurer/lua-trafficgen
 
 and use the master branch:
 
-git checkout master
+.. code-block:: console
+
+    git checkout master
 
 VSPERF uses a particular Lua script with the MoonGen project:
 
@@ -808,7 +812,7 @@ Example of this configuration is in conf/03_traffic.conf or conf/10_custom.conf.
     TRAFFICGEN_TREX_USER = ''
     TRAFFICGEN_TREX_BASE_DIR = ''
 
-TRAFFICGEN_TREX_USER has to have sudo permission and passwordless access.
+TRAFFICGEN_TREX_USER has to have sudo permission and password-less access.
 TRAFFICGEN_TREX_BASE_DIR is the place, where is stored 't-rex-64' file.
 
 It is possible to specify the accuracy of RFC2544 Throughput measurement.
diff --git a/docs/testing/user/configguide/upgrade.rst b/docs/testing/user/configguide/upgrade.rst
index cf92572c..a41683ee 100644
--- a/docs/testing/user/configguide/upgrade.rst
+++ b/docs/testing/user/configguide/upgrade.rst
@@ -35,6 +35,7 @@ List of stable releases:
    colorado.2.0
    colorado.3.0
    danube.1.0
+   euphrates.1.0
 
 You could select which stable release should be used. For example, select ``danube.1.0``:
 
@@ -180,4 +181,3 @@ parameters and update them according to the documentation:
    rfc2544_tests
    stream_type
    traffic_type
-
diff --git a/docs/testing/user/userguide/integration.rst b/docs/testing/user/userguide/integration.rst
index 83b29da6..249a03c4 100644
--- a/docs/testing/user/userguide/integration.rst
+++ b/docs/testing/user/userguide/integration.rst
@@ -457,7 +457,7 @@ To run GENEVE decapsulation tests:
 Executing Tunnel encapsulation+decapsulation tests
 --------------------------------------------------
 
-The OVS DPDK encapsulation_decapsulation tests requires IPs, MAC addresses,
+The OVS DPDK encapsulation/decapsulation tests requires IPs, MAC addresses,
 bridge names and WHITELIST_NICS for DPDK.
 
 The test cases can test the tunneling encap and decap without using any ingress
diff --git a/docs/testing/user/userguide/testusage.rst b/docs/testing/user/userguide/testusage.rst
index 4d3528d0..20c30a40 100644
--- a/docs/testing/user/userguide/testusage.rst
+++ b/docs/testing/user/userguide/testusage.rst
@@ -20,6 +20,8 @@ support in VSPERF includes:
   Traffic generator modules.
 - Moongen software traffic generator. Requires a separate machine running
   moongen to execute packet generation.
+- T-Rex software traffic generator. Requires a separate machine running T-Rex
+  Server to execute packet generation.
 
 If you want to use another traffic generator, please select the :ref:`trafficgen-dummy`
 generator.
@@ -475,7 +477,7 @@ For example:
 
 * vSwitch tests with DPDK or without DPDK support to verify impact
   of VF usage on vSwitch performance
-* tests without vSwitch, where traffic is forwared directly
+* tests without vSwitch, where traffic is forwarded directly
   between VF interfaces by packet forwarder (e.g. testpmd application)
 * tests without vSwitch, where VM accesses VF interfaces directly
   by PCI-passthrough_ to measure raw VM throughput performance.
@@ -486,11 +488,11 @@ Using QEMU with PCI passthrough support
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Raw virtual machine throughput performance can be measured by execution of PVP
-test with direct access to NICs by PCI passthrough. To execute VM with direct
+test with direct access to NICs by PCI pass-through. To execute VM with direct
 access to PCI devices, enable vfio-pci_. In order to use virtual functions,
 SRIOV-support_ must be enabled.
 
-Execution of test with PCI passthrough with vswitch disabled:
+Execution of test with PCI pass-through with vswitch disabled:
 
 .. code-block:: console
 
@@ -498,9 +500,9 @@ Execution of test with PCI passthrough with vswitch disabled:
                --vswitch none --vnf QemuPciPassthrough pvp_tput
 
 Any of supported guest-loopback-application_ can be used inside VM with
-PCI passthrough support.
+PCI pass-through support.
 
-Note: Qemu with PCI passthrough support can be used only with PVP test
+Note: Qemu with PCI pass-through support can be used only with PVP test
 deployment.
 
 .. _guest-loopback-application: