summaryrefslogtreecommitdiffstats
path: root/docs/testing/user/configguide
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/configguide')
-rw-r--r--docs/testing/user/configguide/installation.rst3
-rw-r--r--docs/testing/user/configguide/trafficgen.rst16
-rw-r--r--docs/testing/user/configguide/upgrade.rst2
3 files changed, 13 insertions, 8 deletions
diff --git a/docs/testing/user/configguide/installation.rst b/docs/testing/user/configguide/installation.rst
index 0a98c945..8bad4efd 100644
--- a/docs/testing/user/configguide/installation.rst
+++ b/docs/testing/user/configguide/installation.rst
@@ -63,6 +63,7 @@ The vSwitch must support Open Flow 1.3 or greater.
* Open vSwitch
* Open vSwitch with DPDK support
* TestPMD application from DPDK (supports p2p and pvp scenarios)
+* Cisco VPP
Supported Hypervisors
---------------------
@@ -342,7 +343,7 @@ following location:
http://www.tuned-project.org/2017/04/27/tuned-2-8-0-released/
-Follow instructions to install the latest tuned-adm onto your system. For
+Follow the instructions to install the latest tuned-adm onto your system. For
current RHEL customers you should already have the most current version. You
just need to install the cpu-partitioning profile.
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst
index 2d2b9a9e..597f566b 100644
--- a/docs/testing/user/configguide/trafficgen.rst
+++ b/docs/testing/user/configguide/trafficgen.rst
@@ -248,7 +248,7 @@ Ixia
----
VSPERF can use both IxNetwork and IxExplorer TCL servers to control Ixia chassis.
-However usage of IxNetwork TCL server is a preferred option. Following sections
+However, usage of IxNetwork TCL server is a preferred option. The following sections
will describe installation and configuration of IxNetwork components used by VSPERF.
Installation
@@ -675,11 +675,15 @@ https://github.com/emmericp/MoonGen
For VSPERF use, MoonGen should be cloned from here (as opposed to the
previously mentioned GitHub):
-git clone https://github.com/atheurer/lua-trafficgen
+.. code-block:: console
+
+ git clone https://github.com/atheurer/lua-trafficgen
and use the master branch:
-git checkout master
+.. code-block:: console
+
+ git checkout master
VSPERF uses a particular Lua script with the MoonGen project:
@@ -808,10 +812,10 @@ Example of this configuration is in conf/03_traffic.conf or conf/10_custom.conf.
TRAFFICGEN_TREX_USER = ''
TRAFFICGEN_TREX_BASE_DIR = ''
-TRAFFICGEN_TREX_USER has to have sudo permission and passwordless access.
+TRAFFICGEN_TREX_USER has to have sudo permission and password-less access.
TRAFFICGEN_TREX_BASE_DIR is the place, where is stored 't-rex-64' file.
-It is possible to specify the accurancy of RFC2544 Throughput measurement.
+It is possible to specify the accuracy of RFC2544 Throughput measurement.
Threshold below defines maximal difference between frame rate of successful
(i.e. defined frameloss was reached) and unsuccessful (i.e. frameloss was
exceeded) iterations.
@@ -825,7 +829,7 @@ Default value of this parameter is defined in conf/03_traffic.conf as follows:
SR-IOV
~~~~~~
T-Rex by default only accepts packets on the receive side if the destination mac matches the
-MAC address specificed in the /etc/trex-cfg.yaml on the server side. For SR-IOV this creates
+MAC address specified in the /etc/trex-cfg.yaml on the server side. For SR-IOV this creates
challenges with modifying the MAC address in the traffic profile to correctly flow packets
through specified VFs. To remove this limitation enable promiscuous mode on T-Rex to allow
all packets regardless of the destination mac to be accepted.
diff --git a/docs/testing/user/configguide/upgrade.rst b/docs/testing/user/configguide/upgrade.rst
index cf92572c..a41683ee 100644
--- a/docs/testing/user/configguide/upgrade.rst
+++ b/docs/testing/user/configguide/upgrade.rst
@@ -35,6 +35,7 @@ List of stable releases:
colorado.2.0
colorado.3.0
danube.1.0
+ euphrates.1.0
You could select which stable release should be used. For example, select ``danube.1.0``:
@@ -180,4 +181,3 @@ parameters and update them according to the documentation:
rfc2544_tests
stream_type
traffic_type
-