aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user/configguide/trafficgen.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/configguide/trafficgen.rst')
-rw-r--r--docs/testing/user/configguide/trafficgen.rst29
1 files changed, 29 insertions, 0 deletions
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst
index 4b9eec6e..91c4084e 100644
--- a/docs/testing/user/configguide/trafficgen.rst
+++ b/docs/testing/user/configguide/trafficgen.rst
@@ -826,6 +826,15 @@ Default value of this parameter is defined in conf/03_traffic.conf as follows:
TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = ''
+T-Rex can have learning packets enabled. For certain tests it may be beneficial
+to send some packets before starting test traffic to allow switch learning to take
+place. This can be adjusted with the following configurations:
+
+.. code-block:: console
+
+ TRAFFICGEN_TREX_LEARNING_MODE=True
+ TRAFFICGEN_TREX_LEARNING_DURATION=5
+
SR-IOV and Multistream layer 2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
T-Rex by default only accepts packets on the receive side if the destination mac matches the
@@ -840,3 +849,23 @@ modified. Enable Promiscuous mode when doing multistream at layer 2 testing with
.. code-block:: console
TRAFFICGEN_TREX_PROMISCUOUS=True
+
+RFC2544 Validation
+~~~~~~~~~~~~~~~~~~
+
+T-Rex can perform a verification run for a longer duration once the binary search of the
+RFC2544 trials have completed. This duration should be at least 60 seconds. This is similar
+to other traffic generator functionality where a more sustained time can be attempted to
+verify longer runs from the result of the search. This can be configured with the following
+params
+
+.. code-block:: console
+
+ TRAFFICGEN_TREX_VERIFICATION_MODE = False
+ TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
+ TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
+
+The duration and maximum number of attempted verification trials can be set to change the
+behavior of this step. If the verification step fails, it will resume the binary search
+with new values where the maximum output will be the last attempted frame rate minus the
+current set thresh hold.