diff options
Diffstat (limited to 'docs/testing/user/configguide/trafficgen.rst')
| -rw-r--r-- | docs/testing/user/configguide/trafficgen.rst | 43 |
1 files changed, 42 insertions, 1 deletions
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst index 4b9eec6e..33824486 100644 --- a/docs/testing/user/configguide/trafficgen.rst +++ b/docs/testing/user/configguide/trafficgen.rst @@ -44,7 +44,8 @@ and is configured as follows: 'stream_type' : 'L4', 'pre_installed_flows' : 'No', # used by vswitch implementation 'flow_type' : 'port', # used by vswitch implementation - + 'flow_control' : False, # supported only by IxNet + 'learning_frames' : True, # supported only by IxNet 'l2': { 'framesize': 64, 'srcmac': '00:00:00:00:00:00', @@ -67,6 +68,13 @@ and is configured as follows: 'priority': 0, 'cfi': 0, }, + 'capture': { + 'enabled': False, + 'tx_ports' : [0], + 'rx_ports' : [1], + 'count': 1, + 'filter': '', + }, } The framesize parameter can be overridden from the configuration @@ -783,6 +791,10 @@ It is neccesary for proper connection between Trex server and VSPERF. cd trex-core/scripts/ ./t-rex-64 -i +**NOTE:** Please check your firewall settings at both DUT and T-Rex server. +Firewall must allow a connection from DUT (VSPERF) to the T-Rex server running +at TCP port 4501. + For additional information about Trex stateless mode see Trex stateless documentation: https://trex-tgn.cisco.com/trex/doc/trex_stateless.html @@ -826,6 +838,15 @@ Default value of this parameter is defined in conf/03_traffic.conf as follows: TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = '' +T-Rex can have learning packets enabled. For certain tests it may be beneficial +to send some packets before starting test traffic to allow switch learning to take +place. This can be adjusted with the following configurations: + +.. code-block:: console + + TRAFFICGEN_TREX_LEARNING_MODE=True + TRAFFICGEN_TREX_LEARNING_DURATION=5 + SR-IOV and Multistream layer 2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ T-Rex by default only accepts packets on the receive side if the destination mac matches the @@ -840,3 +861,23 @@ modified. Enable Promiscuous mode when doing multistream at layer 2 testing with .. code-block:: console TRAFFICGEN_TREX_PROMISCUOUS=True + +RFC2544 Validation +~~~~~~~~~~~~~~~~~~ + +T-Rex can perform a verification run for a longer duration once the binary search of the +RFC2544 trials have completed. This duration should be at least 60 seconds. This is similar +to other traffic generator functionality where a more sustained time can be attempted to +verify longer runs from the result of the search. This can be configured with the following +params + +.. code-block:: console + + TRAFFICGEN_TREX_VERIFICATION_MODE = False + TRAFFICGEN_TREX_VERIFICATION_DURATION = 60 + TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10 + +The duration and maximum number of attempted verification trials can be set to change the +behavior of this step. If the verification step fails, it will resume the binary search +with new values where the maximum output will be the last attempted frame rate minus the +current set thresh hold. |