diff options
Diffstat (limited to 'docs/guides/quickstart.rst')
| -rwxr-xr-x | docs/guides/quickstart.rst | 422 |
1 files changed, 0 insertions, 422 deletions
diff --git a/docs/guides/quickstart.rst b/docs/guides/quickstart.rst deleted file mode 100755 index b85b3c8a..00000000 --- a/docs/guides/quickstart.rst +++ /dev/null @@ -1,422 +0,0 @@ -Getting Started with 'vsperf' -============================= - -Hardware Requirements ---------------------- - -VSPERF requires one of the following traffic generators to run tests: - -- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA client software -- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual in a VM) and a -VM to run the Spirent Virtual Deployment Service image, formerly known as "Spirent LabServer". - -Both test configurations, above, also require a CentOS Linux release 7.1.1503 (Core) host. - -vSwitch Requirements --------------------- - -The vSwitch must support Open Flow 1.3 or greater. - -Installation ------------- - -Follow the `installation instructions <installation.html>`__ to install. - -IXIA Setup ----------- - -On the CentOS 7 system -~~~~~~~~~~~~~~~~~~~~~~ - -You need to install IxNetworkTclClient$(VER\_NUM)Linux.bin.tgz. - -On the IXIA client software system -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Find the IxNetwork TCL server app (start -> All Programs -> IXIA -> -IxNetwork -> IxNetwork\_$(VER\_NUM) -> IxNetwork TCL Server) - -Right click on IxNetwork TCL Server, select properties - Under shortcut tab in -the Target dialogue box make sure there is the argument "-tclport xxxx" -where xxxx is your port number (take note of this port number you will -need it for the 10\_custom.conf file). - -|Alt text| - -Hit Ok and start the TCL server application - -Spirent Setup -------------- - -Spirent installation files and instructions are available on the -Spirent support website at: - -http://support.spirent.com - -Select a version of Spirent TestCenter software to utilize. This example -will use Spirent TestCenter v4.57 as an example. Substitute the appropriate -version in place of 'v4.57' in the examples, below. - -On the CentOS 7 System -~~~~~~~~~~~~~~~~~~~~~~ - -Download and install the following: - -Spirent TestCenter Application, v4.57 for 64-bit Linux Client - -Spirent Virtual Deployment Service (VDS) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Spirent VDS is required for both TestCenter hardware and virtual -chassis in the vsperf environment. For installation, select the version -that matches the Spirent TestCenter Application version. For v4.57, -the matching VDS version is 1.0.55. Download either the ova (VMware) -or qcow2 (QEMU) image and create a VM with it. Initialize the VM -according to Spirent installation instructions. - -Using Spirent TestCenter Virtual (STCv) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -STCv is available in both ova (VMware) and qcow2 (QEMU) formats. For -VMware, download: - -Spirent TestCenter Virtual Machine for VMware, v4.57 for Hypervisor - VMware ESX.ESXi - -Virtual test port performance is affected by the hypervisor configuration. For -best practice results in deploying STCv, the following is suggested: - -- Create a single VM with two test ports rather than two VMs with one port each -- Set STCv in DPDK mode -- Give STCv 2*n + 1 cores, where n = the number of ports. For vsperf, cores = 5. -- Turning off hyperthreading and pinning these cores will improve performance -- Give STCv 2 GB of RAM - -To get the highest performance and accuracy, Spirent TestCenter hardware is -recommended. vsperf can run with either stype test ports. - -Cloning and building src dependencies -------------------------------------- - -In order to run VSPERF, you will need to download DPDK and OVS. You can -do this manually and build them in a preferred location, or you could -use vswitchperf/src. The vswitchperf/src directory contains makefiles -that will allow you to clone and build the libraries that VSPERF depends -on, such as DPDK and OVS. To clone and build simply: - - .. code-block:: console - - cd src - make - -VSPERF can be used with OVS without DPDK support. In this case you have -to specify path to the kernel sources by WITH\_LINUX parameter: - - .. code-block:: console - - cd src - make WITH_LINUX=/lib/modules/`uname -r`/build - -To build DPDK and OVS for PVP and PVVP testing with vhost_user as the guest -access method, use: - - .. code-block:: console - - make VHOST_USER=y - -To build everything: Vanilla OVS, OVS with vhost_user as the guest access -method and OVS with vhost_cuse access simply: - .. code-block:: console - - make - -The vhost_user build will reside in src/ovs/ -The vhost_cuse build will reside in vswitchperf/src_cuse -The Vanilla OVS build will reside in vswitchperf/src_vanilla - -To delete a src subdirectory and its contents to allow you to re-clone simply -use: - - .. code-block:: console - - make clobber - -Configure the ``./conf/10_custom.conf`` file --------------------------------------------- -The ``10_custom.conf`` file is the configuration file that overrides -default configurations in all the other configuration files in ``./conf`` -The supplied ``10_custom.conf`` file must be modified, as it contains -configuration items for which there are no reasonable default values. - -The configuration items that can be added is not limited to the initial -contents. Any configuration item mentioned in any .conf file in -``./conf`` directory can be added and that item will be overridden by -the custom configuration value. - -Using a custom settings file ----------------------------- - -If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory -of if you want to use an alternative configuration file, the file can -be passed to ``vsperf`` via the ``--conf-file`` argument. - - .. code-block:: console - - ./vsperf --conf-file <path_to_settings_py> ... - -Note that configuration passed in via the environment (``--load-env``) -or via another command line argument will override both the default and -your custom configuration files. This "priority hierarchy" can be -described like so (1 = max priority): - -1. Command line arguments -2. Environment variables -3. Configuration file(s) - --------------- - -Executing tests ---------------- - -Before running any tests make sure you have root permissions by adding -the following line to /etc/sudoers: - - .. code-block:: console - - username ALL=(ALL) NOPASSWD: ALL - -username in the example above should be replaced with a real username. - -To list the available tests: - - .. code-block:: console - - ./vsperf --list - -To run a single test: - - .. code-block:: console - - ./vsperf $TESTNAME - -Where $TESTNAME is the name of the vsperf test you would like to run. - -To run a group of tests, for example all tests with a name containing -'RFC2544': - - .. code-block:: console - - ./vsperf --conf-file=user_settings.py --tests="RFC2544" - -To run all tests: - - .. code-block:: console - - ./vsperf --conf-file=user_settings.py - -Some tests allow for configurable parameters, including test duration -(in seconds) as well as packet sizes (in bytes). - -.. code:: bash - - ./vsperf --conf-file user_settings.py - --tests RFC2544Tput - --test-param "duration=10;pkt_sizes=128" - -For all available options, check out the help dialog: - - .. code-block:: console - - ./vsperf --help - -Executing Vanilla OVS tests ----------------------------- -If you have compiled all the variants of OVS in ''src/'' please skip -step 1. - -1. Recompile src for Vanilla OVS testing - - .. code-block:: console - - cd src - make cleanse - make WITH_LINUX=/lib/modules/`uname -r`/build - -2. Update your ''10_custom.conf'' file to use the appropriate variables -for Vanilla OVS: - .. code-block:: console - - VSWITCH = 'OvsVanilla' - VSWITCH_VANILLA_PHY_PORT_NAMES = ['$PORT1', '$PORT1'] - -Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind -to the vswitch. - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file <path_to_settings_py> - -Please note if you don't want to configure Vanilla OVS through the -configuration file, you can pass it as a CLI argument; BUT you must -set the ports. - - .. code-block:: console - - ./vsperf --vswitch OvsVanilla - - - Executing PVP and PVVP tests ----------------------------- -To run tests using vhost-user as guest access method: - -1. Set VHOST_METHOD and VNF of your settings file to: - - .. code-block:: console - - VHOST_METHOD='user' - VNF = 'QemuDpdkVhost' - -2. Recompile src for VHOST USER testing - - .. code-block:: console - - cd src - make cleanse - make VHOST_USER=y - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file <path_to_settings_py> - -To run tests using vhost-cuse as guest access method: - -1. Set VHOST_METHOD and VNF of your settings file to: - - .. code-block:: console - - VHOST_METHOD='cuse' - VNF = 'QemuDpdkVhostCuse' - -2. Recompile src for VHOST USER testing - - .. code-block:: console - - cd src - make cleanse - make VHOST_USER=n - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file <path_to_settings_py> - -Executing PVP tests using Vanilla OVS -------------------------------------- -To run tests using Vanilla OVS: - -1. Set the following variables: - - .. code-block:: console - - VSWITCH = 'OvsVanilla' - VNF = 'QemuVirtioNet' - - VANILLA_TGEN_PORT1_IP = n.n.n.n - VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_TGEN_PORT2_IP = n.n.n.n - VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_BRIDGE_IP = n.n.n.n - - or use --test-param - - ./vsperf --conf-file user_settings.py - --test-param "vanilla_tgen_tx_ip=n.n.n.n; - vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn" - - -2. Recompile src for Vanilla OVS testing - - .. code-block:: console - - cd src - make cleanse - make WITH_LINUX=/lib/modules/`uname -r`/build - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file <path_to_settings_py> - -Selection of loopback application for PVP and PVVP tests --------------------------------------------------------- -To select loopback application, which will perform traffic forwarding -inside VM, following configuration parameter should be configured: - - .. code-block:: console - - GUEST_LOOPBACK = ['testpmd', 'testpmd'] - - or use --test-param - - ./vsperf --conf-file user_settings.py - --test-param "guest_loopback=testpmd" - -Supported loopback applications are: - - .. code-block:: console - - 'testpmd' - testpmd from dpdk will be built and used - 'l2fwd' - l2fwd module provided by Huawei will be built and used - 'linux_bridge' - linux bridge will be configured - 'buildin' - nothing will be configured by vsperf; VM image must - ensure traffic forwarding between its interfaces - -Guest loopback application must be configured, otherwise traffic -will not be forwarded by VM and testcases with PVP and PVVP deployments -will fail. Guest loopback application is set to 'testpmd' by default. - -Code change verification by pylint ----------------------------------- -Every developer participating in VSPERF project should run -pylint before his python code is submitted for review. Project -specific configuration for pylint is available at 'pylint.rc'. - -Example of manual pylint invocation: - - .. code-block:: console - - pylint --rcfile ./pylintrc ./vsperf - -GOTCHAs: --------- - -OVS with DPDK and QEMU -~~~~~~~~~~~~~~~~~~~~~~~ -If you encounter the following error: "before (last 100 chars): -'-path=/dev/hugepages,share=on: unable to map backing store for -hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP -deployment scenario, check the amount of hugepages on your system: - -.. code:: bash - - cat /proc/meminfo | grep HugePages - - -By default the vswitchd is launched with 1Gb of memory, to change -this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate -an appropriate amount of memory: - -.. code:: bash - - VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0'] - --------------- - -.. |Alt text| image:: ../images/TCLServerProperties.png |