diff options
Diffstat (limited to 'conf/integration/01b_dpdk_regression_tests.conf')
| -rw-r--r-- | conf/integration/01b_dpdk_regression_tests.conf | 115 |
1 files changed, 91 insertions, 24 deletions
diff --git a/conf/integration/01b_dpdk_regression_tests.conf b/conf/integration/01b_dpdk_regression_tests.conf index 2e63d677..abc56c28 100644 --- a/conf/integration/01b_dpdk_regression_tests.conf +++ b/conf/integration/01b_dpdk_regression_tests.conf @@ -1,4 +1,4 @@ -# Copyright 2017 Intel Corporation. +# Copyright 2017-2018 Intel Corporation., Tieto # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -170,9 +170,6 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', '|Error attaching device.*$NICS[0]["pci"]'], ['tools', 'assert', 'not len(#STEP[-1])'], - # clean up - ['vswitch', 'del_port', 'int_br0', '#STEP[port2][0]'], - ['vswitch', 'del_switch', 'int_br0'], ] }, { @@ -344,14 +341,14 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ # frame loss with small packets should be detected ['tools', 'assert', '#STEP[-1][0]["frame_loss_percent"] > 10'], # delete phy ports so they can be created with flow control - ['vswitch', 'del_flow', 'br0', {}], - ['vswitch', 'del_port', 'br0', 'dpdk0'], - ['vswitch', 'del_port', 'br0', 'dpdk1'], + ['vswitch', 'del_flow', '$VSWITCH_BRIDGE_NAME', {}], + ['vswitch', 'del_port', '$VSWITCH_BRIDGE_NAME', 'dpdk0'], + ['vswitch', 'del_port', '$VSWITCH_BRIDGE_NAME', 'dpdk1'], # turn on flow control - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk options:dpdk-devargs=$NICS[0]["pci"] options:rx-flow-ctrl=true'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] add-port br0 dpdk1 -- set Interface dpdk1 type=dpdk options:dpdk-devargs=$NICS[1]["pci"] options:rx-flow-ctrl=true'], - ['vswitch', 'add_flow', 'br0', {'in_port': '3', 'actions': ['output:4'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '4', 'actions': ['output:3'], 'idle_timeout': '0'}], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] add-port $VSWITCH_BRIDGE_NAME dpdk0 -- set Interface dpdk0 type=dpdk options:dpdk-devargs=$NICS[0]["pci"] options:rx-flow-ctrl=true'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] add-port $VSWITCH_BRIDGE_NAME dpdk1 -- set Interface dpdk1 type=dpdk options:dpdk-devargs=$NICS[1]["pci"] options:rx-flow-ctrl=true'], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '3', 'actions': ['output:4'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '4', 'actions': ['output:3'], 'idle_timeout': '0'}], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show'], ['trafficgen', 'send_traffic', {}], ['trafficgen', 'get_results'], @@ -671,15 +668,17 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TestSteps": [ # send traffic to verify correct PVP configuration ['trafficgen', 'send_traffic', {}], - ['vswitch', 'dump_flows', 'br0'], + ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'], # restart vswitchd, ovsdb is kept untouched, so ovs configuration # (except flows) will be restored ['vswitch', 'restart'], - ['vswitch', 'del_flow', 'br0'], - ['vswitch', 'add_flow', 'br0', {'in_port': '1', 'actions': ['output:3'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '3', 'actions': ['output:1'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '2', 'actions': ['output:4'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '4', 'actions': ['output:2'], 'idle_timeout': '0'}], + ['vswitch', 'del_flow', '$VSWITCH_BRIDGE_NAME', {}], + ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '1', 'actions': ['output:3'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '3', 'actions': ['output:1'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '2', 'actions': ['output:4'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '4', 'actions': ['output:2'], 'idle_timeout': '0'}], + ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'], # send traffic to verify that OVS works correctly after restart ['trafficgen', 'send_traffic', {}], ], @@ -718,13 +717,13 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "VSWITCH_VHOSTUSER_SERVER_MODE" : True, }, "TestSteps": [ - ['vswitch', 'add_switch', 'br0'], + ['vswitch', 'add_switch', '$VSWITCH_BRIDGE_NAME'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Open_vSwitch . ' 'other_config:vhost-sock-dir=test_dir'], # enforce vswitchd to read new configuration ['vswitch', 'restart'], ['tools', 'exec_shell', 'sudo mkdir $TOOLS["ovs_var_tmp"]/test_dir'], - ['vswitch', 'add_vport', 'br0'], + ['vswitch', 'add_vport', '$VSWITCH_BRIDGE_NAME'], ['tools', 'exec_shell', 'ls -1 $TOOLS["ovs_var_tmp"]/test_dir', '|dpdkvhostuser0'], ['tools', 'assert', 'len(#STEP[-1])'], @@ -1297,7 +1296,7 @@ _OVSDPDK_RATE_confirm_multiple_rate_limit_setup = \ # check that traffic rate is no longer limited ['trafficgen', 'get_results'], ['tools', 'assert', 'int(#STEP[-1][0]["throughput_rx_mbps"])>500'], - ['vswitch', 'dump_flows', 'br0'], + ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'], ] INTEGRATION_TESTS = INTEGRATION_TESTS + [ @@ -1603,8 +1602,8 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "Parameters" : {}, "TestSteps": [ # Setup switch,port and logs - ['vswitch', 'add_switch', 'br0'], - ['vswitch', 'add_vport', 'br0'], + ['vswitch', 'add_switch', '$VSWITCH_BRIDGE_NAME'], + ['vswitch', 'add_vport', '$VSWITCH_BRIDGE_NAME'], ['#LOG_MARK', 'tools', 'exec_shell', 'echo $((1+`wc -l $_OVSDPDK_VSWITCH_LOG | cut -d" " -f1`))', '(\d+)'], @@ -1633,8 +1632,8 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "Parameters" : {}, "TestSteps": [ # Setup switch,port and logs - ['vswitch', 'add_switch', 'br0'], - ['vswitch', 'add_vport', 'br0'], + ['vswitch', 'add_switch', '$VSWITCH_BRIDGE_NAME'], + ['vswitch', 'add_vport', '$VSWITCH_BRIDGE_NAME'], ['#LOG_MARK', 'tools', 'exec_shell', 'echo $((1+`wc -l $_OVSDPDK_VSWITCH_LOG | cut -d" " -f1`))', '(\d+)'], @@ -1686,4 +1685,72 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ }, "TestSteps": _OVSDPDK_QOS_confirm_multiple_qos_setup }, + ############################################################ + # + # Custom statistics + # + ############################################################ + { + "Name": "ovsdpdk_custstat_check", + "Deployment": "clean", + "Description": "Test if custom statistics are supported.", + "vSwitch" : "OvsDpdkVhost", + "TestSteps": [ + # enable custom statistics + ['vswitch', 'add_switch', 'int_br0', [ + 'protocols=OpenFlow10,OpenFlow11,OpenFlow12,' + 'OpenFlow13,OpenFlow14,OpenFlow15']], + ['#port', 'vswitch', 'add_phy_port', 'int_br0'], + # check that custom statistics are available for given interface + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-ofctl"] -O OpenFlow14 ' + 'dump-ports int_br0 #STEP[port][1]', + '|CUSTOM Statistics'], + ['tools', 'assert', 'len(#STEP[-1])'], + ['vswitch', 'del_port', 'int_br0', '#STEP[port][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + { + "Name": "ovsdpdk_custstat_rx_error", + "Deployment": "clean", + "Description": "Test bad ethernet CRC counter 'rx_crc_errors' exposed by custom statistics.", + "vSwitch" : "OvsDpdkVhost", + "Parameters" : { + "OVS_OFCTL_ARGS" : [], + "TRAFFICGEN" : "IxNet", + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 10, + }, + "TRAFFICGEN_DURATION" : 10, + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544_bad_l2_crc.tcl", + }, + "TestSteps": [ + # enable custom statistics + ['vswitch', 'add_switch', 'int_br0', [ + 'protocols=OpenFlow10,OpenFlow11,OpenFlow12,' + 'OpenFlow13,OpenFlow14,OpenFlow15']], + ['#port1', 'vswitch', 'add_phy_port', 'int_br0'], + ['#port2', 'vswitch', 'add_phy_port', 'int_br0'], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '1', 'actions': ['output:2']}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '2', 'actions': ['output:1']}], + ['#crc_old', 'tools', 'exec_shell', 'sudo $TOOLS["ovs-ofctl"] -O OpenFlow14 ' + 'dump-ports int_br0 #STEP[port1][1]', + '|rx_crc_errors=(\d+)'], + # frames will be dropped by NIC, so we have to suppress send_traffic validation + # to avoid test failure + ['!trafficgen', 'send_traffic', {}], + # check that custom statistics are available for given interface + ['#crc_new', 'tools', 'exec_shell', 'sudo $TOOLS["ovs-ofctl"] -O OpenFlow14 ' + 'dump-ports int_br0 #STEP[port1][1]', + '|rx_crc_errors=(\d+)'], + ['tools', 'assert', '#STEP[crc_new] > #STEP[crc_old]'], + # tear down the environment + ['vswitch', 'dump_flows', 'int_br0'], + ['vswitch', 'del_flow', 'int_br0', {}], + ['vswitch', 'del_port', 'int_br0', '#STEP[port1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[port2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, ] |