summaryrefslogtreecommitdiffstats
path: root/conf/10_custom.conf
diff options
context:
space:
mode:
Diffstat (limited to 'conf/10_custom.conf')
-rw-r--r--conf/10_custom.conf62
1 files changed, 8 insertions, 54 deletions
diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 3f98d543..8883cb7c 100644
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -15,78 +15,32 @@
RTE_TARGET = '' # the relevant DPDK build target
# traffic generator to use in tests
-TRAFFICGEN = 'TestCenter'
-#TRAFFICGEN = 'Dummy'
+#TRAFFICGEN = 'TestCenter'
+TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
###########################################
# Spirent TestCenter Configuration -- BEGIN
-# Path to Python 2 executable
-TRAFFICGEN_STC_PYTHON2_PATH = "/usr/local/bin/python2.7"
-# Path to the location of the TestCenter files
-TRAFFICGEN_STC_TESTCENTER_PATH = "./tools/pkt_gen/testcenter"
-# Name of the TestCenter RFC2544 Tput helper python script
-TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
-# The address of the Spirent Lab Server to use
TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93"
-# The address of the Spirent License Server in your environment
+
TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96"
-# The address of the TestCenter chassis that holds the east port
+
TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70"
-# The slot number of the card that holds the east port
TRAFFICGEN_STC_EAST_SLOT_NUM = "1"
-# The port number on the card that holds the east port
TRAFFICGEN_STC_EAST_PORT_NUM = "1"
-# The address of the TestCenter chassis that holds the west port
+TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
+TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
+
TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70"
-# The slot number of the card that holds the west port
TRAFFICGEN_STC_WEST_SLOT_NUM = "1"
-# The port number on the card that holds the west port
TRAFFICGEN_STC_WEST_PORT_NUM = "2"
-# The friendly name to identify the Spirent Lab Server test session
-TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
-# The directory to copy results to
-TRAFFICGEN_STC_RESULTS_DIR = "./Results"
-# The prefix for the CSV results file
-TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
-# The number of trials to execute during the test
-TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
-# The duration of each trial executed during the test, in seconds
-TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
-# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
-TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
-# The search mode used to find the throughput rate, COMBO, STEP or BINARY
-TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
-# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
-TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
-# The minimum percent line rate that will be used during the test
-TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
-# The maximum percent line rate that will be used during the test
-TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
-# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
-TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
-# When SearchMode is STEP, the percent increase in load per step
-TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
-# The minimum percentage of load adjustment between iterations
-TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
-# The frame size, in bytes
-TRAFFICGEN_STC_FRAME_SIZE = "256"
-# The maximum acceptable frame loss percent in any iteration
-TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
-# The address to assign to the first emulated device interface on the first east port
-TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
-# The gateway address to assign to the first emulated device interface on the first east port
-TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
-# The address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103"
-# The gateway address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
-# Print additional information to the terminal during the test
-TRAFFICGEN_STC_VERBOSE = "True"
# Spirent TestCenter Configuration -- END
#########################################
+
# Ixia/IxNet configuration
TRAFFICGEN_IXIA_CARD = ''
TRAFFICGEN_IXIA_PORT1 = ''