diff options
Diffstat (limited to 'conf/03_traffic.conf')
| -rw-r--r-- | conf/03_traffic.conf | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf index 87210b8d..72324660 100644 --- a/conf/03_traffic.conf +++ b/conf/03_traffic.conf @@ -19,6 +19,143 @@ # log file for all traffic generator related commands LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' +# TRAFFIC dictionary defines traffic parameters used by all traffic generators. +# Detailed description of TRAFFIC dictionary items follows: +# +# 'traffic_type' - One of the supported traffic types. +# E.g. rfc2544_throughput, rfc2544_back2back +# or rfc2544_continuous +# Data type: str +# Default value: "rfc2544_throughput". +# 'bidir' - Specifies if generated traffic will be full-duplex (True) +# or half-duplex (False) +# Data type: str +# Supported values: "True", "False" +# Default value: "False". +# 'frame_rate' - Defines desired percentage of frame rate used during +# continuous stream tests. +# Data type: int +# Default value: 100. +# 'multistream' - Defines number of flows simulated by traffic generator. +# Value 0 disables multistream feature +# Data type: int +# Supported values: 0-65535 +# Default value: 0. +# 'stream_type' - Stream type is an extension of the "multistream" feature. +# If multistream is disabled, then stream type will be +# ignored. Stream type defines ISO OSI network layer used +# for simulation of multiple streams. +# Data type: str +# Supported values: +# "L2" - iteration of destination MAC address +# "L3" - iteration of destination IP address +# "L4" - iteration of destination port +# of selected transport protocol +# Default value: "L4". +# 'pre_installed_flows' +# - Pre-installed flows is an extension of the multistream" +# feature. If multistream is disabled, then pre-installed +# flows will be ignored. It defines if stream specific flows +# will be inserted into OVS or not. +# Data type: str +# Supported values: +# "Yes" - flows will be inserted into OVS +# "No" - flows won't be inserted into OVS +# Default value: "No". +# 'flow_type' - Defines flows complexity. +# Data type: str +# Supported values: +# "port" - flow is defined by ingress ports +# "IP" - flow is defined by ingress ports +# and src and dst IP addresses +# Default value: "port" +# 'l2' - A dictionary with l2 network layer details. Supported +# values are: +# 'srcmac' - Specifies source MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "00:00:00:00:00:00". +# 'dstmac' - Specifies destination MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "00:00:00:00:00:00". +# 'framesize' - Specifies default frame size. This value should not be +# changed directly. It will be overridden during testcase +# execution by values specified by list TRAFFICGEN_PKT_SIZES. +# Data type: int +# Default value: 64 +# 'l3' - A dictionary with l3 network layer details. Supported +# values are: +# 'srcip' - Specifies source MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "1.1.1.1". +# 'dstip' - Specifies destination MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "90.90.90.90". +# 'proto' - Specifies deflaut protocol type. +# Please check particular traffic generator implementation +# for supported protocol types. +# Data type: str +# Default value: "udp". +# 'l4' - A dictionary with l4 network layer details. Supported +# values are: +# 'srcport' - Specifies source port of selected transport protocol. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: int +# Default value: 3000 +# 'dstport' - Specifies destination port of selected transport protocol. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: int +# Default value: 3001 +# 'vlan' - A dictionary with vlan encapsulation details. Supported +# values are: +# 'enabled' - Specifies if vlan encapsulation should be enabled or +# disabled. +# Data type: bool +# Default value: False +# 'id' - Specifies vlan id. +# Data type: int (NOTE: must fit to 12 bits) +# Default value: 0 +# 'priority' - Specifies a vlan priority (PCP header field). +# Data type: int (NOTE: must fit to 3 bits) +# Default value: 0 +# 'cfi' - Specifies if frames can or cannot be dropped during +# congestion (DEI header field). +# Data type: int (NOTE: must fit to 1 bit) +# Default value: 0 +TRAFFIC = { + 'traffic_type' : 'rfc2544_throughput', + 'frame_rate' : 100, + 'bidir' : 'True', # will be passed as string in title format to tgen + 'multistream' : 0, + 'stream_type' : 'L4', + 'pre_installed_flows' : 'No', # used by vswitch implementation + 'flow_type' : 'port', # used by vswitch implementation + + 'l2': { + 'framesize': 64, + 'srcmac': '00:00:00:00:00:00', + 'dstmac': '00:00:00:00:00:00', + }, + 'l3': { + 'proto': 'udp', + 'srcip': '1.1.1.1', + 'dstip': '90.90.90.90', + }, + 'l4': { + 'srcport': 3000, + 'dstport': 3001, + }, + 'vlan': { + 'enabled': False, + 'id': 0, + 'priority': 0, + 'cfi': 0, + }, +} + #path to traffic generators directory. TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen') |