1 files changed, 104 insertions, 1 deletions
diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf
index efc1b2f6..7e3019a0 100644
--- a/conf/03_traffic.conf
+++ b/conf/03_traffic.conf
@@ -23,7 +23,10 @@ LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
 TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
 
 # traffic generator to use in tests
-TRAFFICGEN = 'IxNet'
+#TRAFFICGEN = 'TestCenter'
+TRAFFICGEN = 'Dummy'
+#TRAFFICGEN = 'IxNet'
+#TRAFFICGEN = 'Ixia'
 
 # List of packet sizes to send.
 # Expand like this: (64, 128, 256, 512, 1024)
@@ -55,3 +58,103 @@ TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
 # The result directory on DUT. This needs to map to the same directory
 # as the previous one
 TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
+
+###########################################
+# Spirent TestCenter Configuration -- BEGIN
+
+# Path to Python 2 executable
+TRAFFICGEN_STC_PYTHON2_PATH = "/bin/python2.7"
+
+# Path to the location of the TestCenter files
+TRAFFICGEN_STC_TESTCENTER_PATH = os.path.join(ROOT_DIR, 'tools/pkt_gen/testcenter')
+
+# Name of the TestCenter RFC2544 Tput helper python script
+TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
+
+# The address of the Spirent Lab Server to use
+TRAFFICGEN_STC_LAB_SERVER_ADDR = ""
+
+# The address of the Spirent License Server in your environment
+TRAFFICGEN_STC_LICENSE_SERVER_ADDR = ""
+
+# The address of the TestCenter chassis that holds the east port
+TRAFFICGEN_STC_EAST_CHASSIS_ADDR = ""
+
+# The slot number of the card that holds the east port
+TRAFFICGEN_STC_EAST_SLOT_NUM = ""
+
+# The port number on the card that holds the east port
+TRAFFICGEN_STC_EAST_PORT_NUM = ""
+
+# The address of the TestCenter chassis that holds the west port
+TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""
+
+# The slot number of the card that holds the west port
+TRAFFICGEN_STC_WEST_SLOT_NUM = ""
+
+# The port number on the card that holds the west port
+TRAFFICGEN_STC_WEST_PORT_NUM = ""
+
+# The friendly name to identify the Spirent Lab Server test session
+TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
+# The directory to copy results to
+
+TRAFFICGEN_STC_RESULTS_DIR = "./Results"
+#  The prefix for the CSV results file
+
+TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
+# The number of trials to execute during the test
+
+TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
+
+# The duration of each trial executed during the test, in seconds
+TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
+
+# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
+TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
+
+# The search mode used to find the throughput rate, COMBO, STEP or BINARY
+TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
+
+# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
+TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
+
+# The minimum percent line rate that will be used during the test
+TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
+
+# The maximum percent line rate that will be used during the test
+TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
+
+# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
+TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
+
+# When SearchMode is STEP, the percent increase in load per step
+TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
+
+# The minimum percentage of load adjustment between iterations
+TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
+
+# The frame size, in bytes
+TRAFFICGEN_STC_FRAME_SIZE = "256"
+
+# The maximum acceptable frame loss percent in any iteration
+TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
+
+# The address to assign to the first emulated device interface on the first east port
+TRAFFICGEN_STC_EAST_INTF_ADDR = ""
+
+# The gateway address to assign to the first emulated device interface on the first east port
+TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = ""
+
+# The address to assign to the first emulated device interface on the first west port
+TRAFFICGEN_STC_WEST_INTF_ADDR = ""
+
+# The gateway address to assign to the first emulated device interface on the first west port
+TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = ""
+
+# Print additional information to the terminal during the test
+TRAFFICGEN_STC_VERBOSE = "True"
+
+# Spirent TestCenter Configuration -- END
+#########################################
+