diff options
Diffstat (limited to 'conf/01_testcases.conf')
| -rwxr-xr-x | conf/01_testcases.conf | 172 |
1 files changed, 84 insertions, 88 deletions
diff --git a/conf/01_testcases.conf b/conf/01_testcases.conf index a8d7a136..bdaeb4da 100755 --- a/conf/01_testcases.conf +++ b/conf/01_testcases.conf @@ -19,60 +19,12 @@ # # "Name": "phy2phy_burst", # A human-readable string identifying the # # test. -# "Traffic Type": "rfc2544_throughput", -# # One of the supported traffic types. -# # It can be overridden by cli option traffic_type. # "Deployment": "p2p", # One of the supported deployment scenarios. # "Description": "Lorem ipsum..." # Optional. A human-readable string # # describing the test. # "Frame Modification": "vlan" # One of the supported frame modifications: # # vlan, mpls, mac, dscp, ttl, ip_addr, # # ip_port. -# "biDirectional": ["True"|"False"] -# # Specifies if generated traffic will be -# # full-duplex (True) or half-duplex (False) -# # It can be overridden by cli option bidirectional. -# # Default value is "False". Must be of type -# # string. -# "MultiStream": 0-65535 # Optional. Defines number of flows simulated -# # by traffic generator. Value 0 disables -# # MultiStream feature -# # It can be overridden by cli option multistream. -# "Stream Type": ["L2"|"L3"|"L4"] # Optional. Stream Type is an extension -# # of the "MultiStream" feature. If MultiStream -# # is disabled, then Stream Type will be ignored. -# # Stream Type defines ISO OSI network layer -# # used for simulation of multiple streams. -# # It can be overridden by cli option stream_type. -# # Values: -# # "L2" - iteration of destination MAC address -# # "L3" - iteration of destination IP address -# # "L4" - iteration of destination port -# # of selected transport protocol -# # Default value is "L4". -# "Pre-installed Flows": ["Yes"|"No"] -# # Optional. Pre-installed Flows is an extension -# # of the "MultiStream" feature. If MultiStream -# # is disabled, then Pre-installed Flows will be -# # ignored. It defines if stream specific flows -# # will be inserted into OVS or not. -# # It can be overridden by cli option -# # pre-installed_flows -# # Values: -# # "Yes" - flows will be inserted into OVS -# # "No" - flows won't be inserted into OVS -# # Default value is "No". -# "Flow Type": ["port"|"IP"] # Optional. Defines flows complexity. In case -# # it isn't specified, then "port" will be used. -# # Values: -# # "port" - flow is defined by ingress ports -# # "IP" - flow is defined by ingress ports -# # and src and dst IP addresses -# "iLoad": 0-100 # Optional. Defines desired percentage -# # of frame rate used during continuous stream -# # tests. Can be overridden by cli option -# # iload. -# # Default value is 100. # "Load": dictionary # Optional. Configures background load # # during testcase execution. # Description of "Load" dictionary keys, their meanings and available values: @@ -115,7 +67,7 @@ # # stated in configuration files or value # # specified on command line through --trafficgen # # parameter. -# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)} +# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)}, # # Dictionary with testcase specific configuration # # environment. Specified parameters will be modified # # before the test execution and their original values will @@ -129,128 +81,172 @@ PERFORMANCE_TESTS = [ { "Name": "phy2phy_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_forwarding", - "Traffic Type": "rfc2889", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Forwarding.RFC2889.MaxForwardingRate", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2889", + }, + }, }, { "Name": "back2back", - "Traffic Type": "rfc2544_back2back", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "phy2phy_tput_mod_vlan", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", "Frame Modification": "vlan", - "biDirectional": "False", - "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification" + "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "p2p", "Description": "Phy2Phy Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvp_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvp", "Description": "PVP Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvvp_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvvp", "Description": "PVVP Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvpv_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvpv", "Description": "Two VMs in parallel with Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "phy2phy_scalability", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Scalability.Flows.RFC2544.0PacketLoss", - "MultiStream": "8000", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + "multistream" : "8000", + }, + }, }, { "Name": "pvp_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "pvp", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "pvp_back2back", - "Traffic Type": "rfc2544_back2back", "Deployment": "pvp", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "pvvp_tput", - "Traffic Type": "rfc2544_throughput", "Collector": "cpu", "Deployment": "pvvp", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "pvvp_back2back", - "Traffic Type": "rfc2544_back2back", "Collector": "cpu", "Deployment": "pvvp", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "phy2phy_cpu_load", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.CPU.RFC2544.0PacketLoss", "Load" : { "tool" : "stress-ng", "load" : 100, "reserved" : 4, "pattern" : "c", - } + }, + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_mem_load", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Memory.RFC2544.0PacketLoss", "Load" : { "tool" : "stress-ng", "load" : 50, "pattern" : "m", "load_memory" : 80, - } + }, + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, - ] |