summaryrefslogtreecommitdiffstats
path: root/ci/build-vsperf.sh
diff options
context:
space:
mode:
Diffstat (limited to 'ci/build-vsperf.sh')
-rwxr-xr-xci/build-vsperf.sh177
1 files changed, 153 insertions, 24 deletions
diff --git a/ci/build-vsperf.sh b/ci/build-vsperf.sh
index e08dd357..d50a431d 100755
--- a/ci/build-vsperf.sh
+++ b/ci/build-vsperf.sh
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -21,15 +21,22 @@
# where job_type is one of "verify", "merge", "daily"
#
-# configuration
+# exit codes
#
EXIT=0
+EXIT_TC_FAILED=1
+EXIT_NO_RESULTS=10
+EXIT_NO_TEST_REPORT_LOG_DIR=11
+
+#
+# configuration
+#
+
VSPERF_BIN='./vsperf'
-LOG_FILE_USER='/tmp/vsperf_user.log'
-LOG_FILE_VANILLA='/tmp/vsperf_vanilla.log'
-LOG_FILE_PREFIX="/tmp/vsperf_build_"
-OPNFV_POD="intel-pod3"
+LOG_FILE_PREFIX="/tmp/vsperf_build"
+DATE=$(date -u +"%Y-%m-%d_%H-%M-%S")
+BRANCH=${GIT_BRANCH##*/}
# CI job specific configuration
# VERIFY - run basic set of TCs with default settings
@@ -42,7 +49,32 @@ TESTPARAM_MERGE=""
TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'
TESTPARAM_DAILY='--test-params pkt_sizes=64,128,512,1024,1518'
# check if user config file exists if not then we will use default settings
-[ -f $HOME/vsperf.conf ] && CONF_FILE="--conf-file ${HOME}/vsperf.conf" || CONF_FILE=""
+if [ -f $HOME/vsperf-${BRANCH}.conf ] ; then
+ # branch specific config was found
+ CONF_FILE="--conf-file ${HOME}/vsperf-${BRANCH}.conf"
+else
+ if [ -f $HOME/vsperf.conf ] ; then
+ CONF_FILE="--conf-file ${HOME}/vsperf.conf"
+ else
+ CONF_FILE=""
+ fi
+fi
+
+# Test report related configuration
+TEST_REPORT_PARTIAL="*_test_report.rst"
+TEST_REPORT_DIR="${WORKSPACE}/docs/results"
+TEST_REPORT_INDEX="${TEST_REPORT_DIR}/index.rst"
+TEST_REPORT_LINK_OLD="https://wiki.opnfv.org/wiki/vsperf_results"
+TEST_REPORT_FILE="${WORKSPACE}/docs_output/results/results.pdf"
+TEST_REPORT_TARBALL="vswitchperf_logs_${DATE}.tar.gz"
+
+if [[ "x${BRANCH}" == "xmaster" ]]; then
+ TEST_REPORT_LINK_NEW="https://artifactory.opnfv.org/logs/$PROJECT/$NODE_NAME/$DATE/${TEST_REPORT_TARBALL}"
+else
+ TEST_REPORT_LINK_NEW="https://artifactory.opnfv.org/logs/$PROJECT/$NODE_NAME/$BRANCH/$DATE/${TEST_REPORT_TARBALL}"
+fi
+
+TEST_REPORT_LOG_DIR="${HOME}/opnfv/$PROJECT/results/$BRANCH"
#
# functions
@@ -90,7 +122,7 @@ function print_results() {
printf " %-70s %-6s\n" $RES_FILE "OK"
else
printf " %-70s %-6s\n" $RES_FILE "FAILED"
- EXIT=1
+ EXIT=$EXIT_TC_FAILED
fi
done
}
@@ -100,9 +132,6 @@ function print_results() {
# $1 - vswitch and vnf combination, one of OVS_vanilla, OVS_with_DPDK_and_vHost_Cuse, OVS_with_DPDK_and_vHost_User
# $2 - CI job type, one of verify, merge, daily
function execute_vsperf() {
- # figure out log file name
- LOG_FILE="${LOG_FILE_PREFIX}"`date "+%Y%m%d_%H%M%S%N"`".log"
-
# figure out list of TCs and execution parameters
case $2 in
"verify")
@@ -122,32 +151,44 @@ function execute_vsperf() {
# execute testcases
echo -e "\nExecution of VSPERF for $1"
- # vsperf must be executed directly from vsperf directory
- cd ..
+
+ DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S")
+
case $1 in
"OVS_vanilla")
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
+ # figure out log file name
+ LOG_SUBDIR="OvsVanilla"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+
+ echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
+ $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
;;
"OVS_with_DPDK_and_vHost_Cuse")
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
+ # figure out log file name
+ LOG_SUBDIR="OvsDpdkVhostCuse"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+
+ echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
+ $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
;;
*)
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
+ # figure out log file name
+ LOG_SUBDIR="OvsDpdkVhost"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+
+ echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE"
+ $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
;;
esac
- # let's go back to CI dir
- cd -
# evaluation of results
echo -e "\nResults for $1"
- RES_DIR=`grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-`
- if [ "x" == "x${RES_DIR}" ] ; then
+ RES_DIR="/$(grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-)"
+ if [[ "/" == "${RES_DIR}" ]] ; then
echo "FAILURE: Results are not available."
+ exit $EXIT_NO_RESULTS
else
- print_results "/${RES_DIR}"
+ print_results "${RES_DIR}"
fi
# show detailed result figures
@@ -161,12 +202,94 @@ function execute_vsperf() {
# TC results
sed -n '/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file | grep -v "Unknown" | cat -s
done
+
+ # add test results into the final doc template
+ for report in ${RES_DIR}/${TEST_REPORT_PARTIAL} ; do
+ # modify link to the artifactory with test report and logs
+ if [ -f $report ] ; then
+ sed -i -e "s,$TEST_REPORT_LINK_OLD,$TEST_REPORT_LINK_NEW," "$report"
+ cp $report $TEST_REPORT_DIR
+ echo " $(basename $report)" >> $TEST_REPORT_INDEX
+ fi
+ done
+
+ # copy logs into dedicated directory
+ mkdir ${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}
+ [ -f "$LOG_FILE" ] && cp -a "${LOG_FILE}" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+ [ -d "$RES_DIR" ] && cp -ar "$RES_DIR" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+}
+
+# generates final test_report in PDF and HTML formats
+function generate_report() {
+
+ # prepare final tarball with all logs...
+ tar --exclude "${TEST_REPORT_TARBALL}" -czf "${TEST_REPORT_LOG_DIR}/${TEST_REPORT_TARBALL}" $(find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d)
+ # ...and remove original log files
+ find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d -exec rm -rf \{\} \;
+
+ # clone releng repository
+ echo "Cloning releng repository..."
+ [ -d releng ] && rm -rf releng
+ git clone https://gerrit.opnfv.org/gerrit/releng &> /dev/null
+
+ # generate final docs with test results
+ echo "Generating test report..."
+ sed -ie 's,python ,python2 ,g' ./releng/utils/docs-build.sh
+ ./releng/utils/docs-build.sh &> /dev/null
+
+ # store PDF with test results into dedicated directory
+ if [ -f $TEST_REPORT_FILE ] ; then
+ cp -a $TEST_REPORT_FILE $TEST_REPORT_LOG_DIR
+ echo "Final test report has been created."
+ else
+ echo "FAILURE: Generation of final test report has failed."
+ fi
+}
+
+# pushes test report and logs collected during test execution into artifactory
+function push_results_to_artifactory() {
+ echo "Pushing results and logs into artifactory..."
+ . ./releng/utils/push-test-logs.sh "$DATE"
+
+ # enter workspace as it could be modified by 3rd party script
+ cd $WORKSPACE
+}
+
+# removes any local changes of repository
+function cleanup() {
+ echo "Cleaning up..."
+ git stash -u
+}
+
+# prepares directory for logs collection and removes old logs
+function initialize_logdir() {
+ if [[ "x$TEST_REPORT_LOG_DIR" == "x" ]] ; then
+ echo "FAILURE: Logging directory is not defined. Logs and report cannot be published!"
+ exit $EXIT_NO_TEST_REPORT_LOG_DIR
+ else
+ # remove TEST_REPORT_LOG_DIR if it exists
+ if [ -e $TEST_REPORT_LOG_DIR ] ; then
+ if [ -f $TEST_REPORT_LOG_DIR ] ; then
+ rm $TEST_REPORT_LOG_DIR
+ else
+ rm -rf ${TEST_REPORT_LOG_DIR}
+ fi
+ fi
+ # create TEST_REPORT_LOG_DIR
+ mkdir -p $TEST_REPORT_LOG_DIR
+ fi
}
#
# main
#
+# enter workspace dir
+cd $WORKSPACE
+
+# initialization
+initialize_logdir
+
# execute job based on passed parameter
case $1 in
"verify")
@@ -195,6 +318,12 @@ case $1 in
execute_vsperf OVS_vanilla $1
terminate_vsperf
+ generate_report
+
+ push_results_to_artifactory
+
+ cleanup
+
exit $EXIT
;;
esac