aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--conf/10_custom.conf14
-rwxr-xr-xdocs/configguide/installation.rst29
-rwxr-xr-xdocs/design/vswitchperf_design.rst4
-rwxr-xr-xsrc/dpdk/Makefile8
-rwxr-xr-xsystems/rhel/7.3/build_base_machine.sh108
-rwxr-xr-xsystems/rhel/7.3/prepare_python_env.sh29
6 files changed, 180 insertions, 12 deletions
diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 929d2679..498ac29f 100644
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -107,3 +107,17 @@ TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
OPNFV_INSTALLER = "Fuel"
OPNFV_URL = "http://testresults.opnfv.org/testapi"
PACKAGE_LIST = "src/package-list.mk"
+
+
+# Binary package configuration for RHEL 7.3 systems with Vanilla OVS
+####################################################################
+# Uncomment these lines for binary usage of Vanilla OVS.
+
+#PATHS['vswitch']['ovs_var_tmp'] = '/var/run/openvswitch/'
+#PATHS['vswitch']['ovs_etc_tmp'] = '/etc/openvswitch/'
+#PATHS['vswitch']['OvsVanilla']['bin']['modules'] = [
+# 'libcrc32c', 'ip_tunnel', 'vxlan', 'gre', 'nf_nat', 'nf_nat_ipv6',
+# 'nf_nat_ipv4', 'nf_conntrack', 'nf_defrag_ipv4', 'nf_defrag_ipv6',
+# 'openvswitch']
+#PATHS['vswitch']['OvsVanilla']['type'] = 'bin'
+
diff --git a/docs/configguide/installation.rst b/docs/configguide/installation.rst
index 7548b3f3..5010aefd 100755
--- a/docs/configguide/installation.rst
+++ b/docs/configguide/installation.rst
@@ -13,7 +13,8 @@ Supported Operating Systems
* Fedora 20
* Fedora 21
* Fedora 22
-* RedHat 7.2 Enterprise
+* RedHat 7.2 Enterprise Linux
+* RedHat 7.3 Enterprise Linux
* Ubuntu 14.04
* Ubuntu 16.04
* Ubuntu 16.10 (kernel 4.8 requires DPDK 16.11 and newer)
@@ -28,15 +29,15 @@ The vSwitch must support Open Flow 1.3 or greater.
Supported Hypervisors
---------------------
-* Qemu version 2.3.
+* Qemu version 2.3 or greater.
Available VNFs
--------------
A simple VNF that forwards traffic through a VM, using:
* DPDK testpmd
-* Linux Brigde
-* custom l2fwd module
+* Linux Bridge
+* Custom l2fwd module
The official VM image is called vloop-vnf and it is available for free
download at OPNFV website.
@@ -91,18 +92,22 @@ automatically.
Script **build_base_machine.sh** will install all the vsperf dependencies
in terms of system packages, Python 3.x and required Python modules.
-In case of CentOS 7 it will install Python 3.3 from an additional repository
-provided by Software Collections (`a link`_). In case of RedHat 7 it will
-install Python 3.4 as an alternate installation in /usr/local/bin. Installation
-script will also use `virtualenv`_ to create a vsperf virtual environment,
-which is isolated from the default Python environment. This environment will
-reside in a directory called **vsperfenv** in $HOME.
+In case of CentOS 7 or RHEL it will install Python 3.3 from an additional
+repository provided by Software Collections (`a link`_). Installation script
+will also use `virtualenv`_ to create a vsperf virtual environment, which is
+isolated from the default Python environment. This environment will reside in a
+directory called **vsperfenv** in $HOME.
+
+**Please Note**: For RHEL 7.3 Enterprise OVS Vanilla is not built from upstream
+source due to kernel incompatibilities. Please see the instructions in the
+vswitchperf_design document for details on configuring OVS Vanilla for binary
+package usage.
You will need to activate the virtual environment every time you start a
new shell session. Its activation is specific to your OS:
-CentOS 7 and RedHat
-===================
+CentOS 7 and RHEL
+=================
.. code:: bash
diff --git a/docs/design/vswitchperf_design.rst b/docs/design/vswitchperf_design.rst
index 88b6ba88..4f33a99f 100755
--- a/docs/design/vswitchperf_design.rst
+++ b/docs/design/vswitchperf_design.rst
@@ -257,6 +257,10 @@ that DPDK sources are not available, then vsperf will continue with test executi
but testpmd can't be used as a guest loopback. This is useful in case, that other guest
loopback applications (e.g. buildin or l2fwd) are used.
+Note: In case of RHEL 7.3 OS usage, binary package configuration is required
+for Vanilla OVS tests. With the installation of a supported rpm for OVS there is
+a section in the ``conf\10_custom.conf`` file that can be used.
+
.. _VSPERF installation scripts: http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html#other-requirements
Configuration of GUEST options
diff --git a/src/dpdk/Makefile b/src/dpdk/Makefile
index 29967029..93cb7292 100755
--- a/src/dpdk/Makefile
+++ b/src/dpdk/Makefile
@@ -19,9 +19,11 @@
# Contributors:
# Aihua Li, Huawei Technologies.
# Martin Klozik, Intel Corporation.
+# Christian Trautman, Red Hat Inc.
include ../mk/master.mk
include ../package-list.mk
+include /etc/os-release
.PHONY: install force_make
@@ -77,6 +79,12 @@ else
$(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.\+/CONFIG_RTE_LIBRTE_VHOST_USER=$(VHOST_USER)/g' $(CONFIG_FILE_LINUXAPP)
$(AT)sed -i -e 's/CONFIG_RTE_BUILD_COMBINE_LIBS=./CONFIG_RTE_BUILD_COMBINE_LIBS=y/g' $(CONFIG_FILE_LINUXAPP)
endif
+# RHEL 7.3 specific config changes to compile
+ifeq ($(ID),"rhel")
+ifeq ($(VERSION_ID),"7.3")
+ $(AT)sed -i.bak s@'SRCS-y += ethtool/igb/igb_main.c'@'#SRCS-y += ethtool/igb/igb_main.c'@g $(WORK_DIR)/lib/librte_eal/linuxapp/kni/Makefile
+endif
+endif
$(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST=./CONFIG_RTE_LIBRTE_VHOST=y/g' $(CONFIG_FILE_LINUXAPP)
$(AT)sed -i -e 's/CONFIG_RTE_LIBRTE_KNI=./CONFIG_RTE_LIBRTE_KNI=n/g' $(CONFIG_FILE_LINUXAPP)
$(AT)cd $(WORK_DIR); make install T=$(DPDK_TARGET) -j DESTDIR=$(WORK_DIR)
diff --git a/systems/rhel/7.3/build_base_machine.sh b/systems/rhel/7.3/build_base_machine.sh
new file mode 100755
index 00000000..5a9b4b2e
--- /dev/null
+++ b/systems/rhel/7.3/build_base_machine.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# Build a base machine for RHEL 7.3
+#
+# Copyright 2016 OPNFV, Intel Corporation & Red Hat Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Contributors:
+# Aihua Li, Huawei Technologies.
+# Martin Klozik, Intel Corporation.
+# Abdul Halim, Intel Corporation.
+# Christian Trautman, Red Hat Inc.
+
+# Make and Compilers
+pkglist=(\
+ automake\
+ fuse-devel\
+ gcc\
+ gcc-c++\
+ glib2-devel\
+ glibc\
+ kernel-devel\
+ openssl-devel\
+ pixman-devel\
+ sysstat\
+)
+
+# Tools
+pkglist=(
+ "${pkglist[@]}"\
+ git\
+ libtool\
+ libpcap-devel\
+ libnet\
+ net-tools\
+ openssl\
+ openssl-devel\
+ pciutils\
+ socat\
+ tk-devel\
+ wget\
+ numactl\
+ numactl-devel\
+)
+
+# python tools for proper QEMU, DPDK, and OVS make
+pkglist=(
+ "${pkglist[@]}"\
+ python-six\
+)
+
+# Iterate installing each package. If packages fail to install, record those
+# packages and exit with an error message on completion. Customer may need to
+# add repo locations and subscription levels.
+failedinstall=()
+for pkg in ${pkglist[*]}; do
+ echo "Installing ${pkg}"
+ yum -y install ${pkg} || failedinstall=("${failedinstall[*]}" "$pkg")
+done
+
+if [ "${#failedinstall[*]}" -gt 0 ]; then
+ echo "The following packages failed to install. Please add appropriate repo\
+ locations and/or subscription levels. Then run the build script again."
+ for fail in ${failedinstall[*]}; do
+ echo $fail
+ done
+ exit 1
+fi
+
+# install SCL for python33 by adding a repo to find its location to install it
+cat <<'EOT' >> /etc/yum.repos.d/python33.repo
+[rhscl-python33-el7]
+name=Copr repo for python33-el7 owned by rhscl
+baseurl=https://copr-be.cloud.fedoraproject.org/results/rhscl/python33-el7/epel-7-$basearch/
+type=rpm-md
+skip_if_unavailable=True
+gpgcheck=1
+gpgkey=https://copr-be.cloud.fedoraproject.org/results/rhscl/python33-el7/pubkey.gpg
+repo_gpgcheck=0
+enabled=1
+enabled_metadata=1
+EOT
+
+# install python33 packages and git-review tool
+yum -y install $(echo "
+python33
+python33-python-tkinter
+" | grep -v ^#)
+
+# cleanup python 33 repo file
+rm -f /etc/yum.repos.d/python33.repo
+
+# Create hugepage dirs
+mkdir -p /dev/hugepages
+
+# prevent ovs vanilla from building from source due to kernel incompatibilities
+sed -i s/'SUBBUILDS = src_vanilla'/'#SUBBUILDS = src_vanilla'/ ../src/Makefile \ No newline at end of file
diff --git a/systems/rhel/7.3/prepare_python_env.sh b/systems/rhel/7.3/prepare_python_env.sh
new file mode 100755
index 00000000..3ba049e8
--- /dev/null
+++ b/systems/rhel/7.3/prepare_python_env.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+#
+# Prepare Python environment for vsperf execution on RHEL 7.3 systems.
+#
+# Copyright 2016 OPNFV, Intel Corporation, Red Hat Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+if [ -d "$VSPERFENV_DIR" ] ; then
+ echo "Directory $VSPERFENV_DIR already exists. Skipping python virtualenv creation."
+ exit
+fi
+
+scl enable python33 "
+virtualenv "$VSPERFENV_DIR"
+source "$VSPERFENV_DIR"/bin/activate
+pip install -r ../requirements.txt
+pip install pylint
+" \ No newline at end of file