aboutsummaryrefslogtreecommitdiffstats
path: root/3rd_party/ixia/pass_fail.tcl
diff options
context:
space:
mode:
Diffstat (limited to '3rd_party/ixia/pass_fail.tcl')
-rwxr-xr-x3rd_party/ixia/pass_fail.tcl760
1 files changed, 760 insertions, 0 deletions
diff --git a/3rd_party/ixia/pass_fail.tcl b/3rd_party/ixia/pass_fail.tcl
new file mode 100755
index 00000000..79b7f10d
--- /dev/null
+++ b/3rd_party/ixia/pass_fail.tcl
@@ -0,0 +1,760 @@
+#!/usr/bin/env tclsh
+
+# Copyright (c) 2014, Ixia
+# Copyright (c) 2015-2016, Intel Corporation
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+# This file is a modified version of a script generated by Ixia
+# IxExplorer.
+
+lappend auto_path [list $lib_path]
+
+package req IxTclHal
+
+###################################################################
+########################## Configuration ##########################
+###################################################################
+
+# Verify that the IXIA chassis spec is given
+
+set reqVars [list "host" "card" "port1" "port2"]
+
+foreach var $reqVars {
+ set var_ns [namespace which -variable "$var"]
+ if { [string compare $var_ns ""] == 0 } {
+ errorMsg "The '$var' variable is undefined. Did you set it?"
+ return -1
+ }
+}
+
+# constants
+
+set fullHex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
+set hexToC5 "000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435363738393A3B3C3D3E3F404142434445464748494A4B4C4D4E4F505152535455565758595A5B5C5D5E5F606162636465666768696A6B6C6D6E6F707172737475767778797A7B7C7D7E7F808182838485868788898A8B8C8D8E8F909192939495969798999A9B9C9D9E9FA0A1A2A3A4A5A6A7A8A9AAABACADAEAFB0B1B2B3B4B5B6B7B8B9BABBBCBDBEBFC0C1C2C3C4C5"
+
+#set payloadLookup(64) [string range $fullHex 0 11]
+set payloadLookup(64) "000102030405"
+set payloadLookup(128) "000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435363738393A3B3C3D3E3F404142434445"
+set payloadLookup(256) "$hexToC5"
+set payloadLookup(512) "$fullHex$hexToC5"
+set payloadLookup(1024) "$fullHex$fullHex$fullHex$hexToC5"
+
+###################################################################
+###################### Chassis Configuration ######################
+###################################################################
+
+if {[isUNIX]} {
+ if {[ixConnectToTclServer $host]} {
+ errorMsg "Error connecting to Tcl Server $host"
+ return $::TCL_ERROR
+ }
+}
+
+######### Chassis #########
+
+# Now connect to the chassis
+if [ixConnectToChassis $host] {
+ ixPuts $::ixErrorInfo
+ return 1
+}
+
+# Get the chassis ID to use in port lists
+set chassis [ixGetChassisID $host]
+
+######### Ports #########
+
+set portList [list [list $chassis $card $port1] \
+ [list $chassis $card $port2]]
+
+# Clear ownership of the ports we’ll use
+if [ixClearOwnership $portList force] {
+ ixPuts $::ixErrorInfo
+ return 1
+}
+
+# Take ownership of the ports we’ll use
+if [ixTakeOwnership $portList] {
+ ixPuts $::ixErrorInfo
+ return 1
+}
+
+foreach portElem $portList {
+ set chasNum [lindex $portElem 0]
+ set cardNum [lindex $portElem 1]
+ set portNum [lindex $portElem 2]
+
+ port setFactoryDefaults $chasNum $cardNum $portNum
+ port config -speed 10000
+ port config -flowControl true
+ port config -transmitMode portTxModeAdvancedScheduler
+ port config -receiveMode [expr $::portCapture|$::portRxModeWidePacketGroup]
+ port config -advertise100FullDuplex false
+ port config -advertise100HalfDuplex false
+ port config -advertise10FullDuplex false
+ port config -advertise10HalfDuplex false
+ port config -portMode port10GigLanMode
+ port config -enableTxRxSyncStatsMode true
+ port config -txRxSyncInterval 2000
+ port config -enableTransparentDynamicRateChange true
+ port config -enableDynamicMPLSMode true
+ if {[port set $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling port set $chasNum $cardNum $portNum"
+ }
+
+ packetGroup setDefault
+ packetGroup config -numTimeBins 1
+ if {[packetGroup setRx $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling packetGroup setRx $chasNum $cardNum $portNum"
+ }
+
+ sfpPlus setDefault
+ sfpPlus config -enableAutomaticDetect false
+ sfpPlus config -txPreTapControlValue 1
+ sfpPlus config -txMainTapControlValue 63
+ sfpPlus config -txPostTapControlValue 2
+ sfpPlus config -rxEqualizerControlValue 0
+ if {[sfpPlus set $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling sfpPlus set $chasNum $cardNum $portNum"
+ }
+
+ filter setDefault
+ filter config -captureTriggerFrameSizeFrom 48
+ filter config -captureTriggerFrameSizeTo 48
+ filter config -captureFilterFrameSizeFrom 48
+ filter config -captureFilterFrameSizeTo 48
+ filter config -userDefinedStat1FrameSizeFrom 48
+ filter config -userDefinedStat1FrameSizeTo 48
+ filter config -userDefinedStat2FrameSizeFrom 48
+ filter config -userDefinedStat2FrameSizeTo 48
+ filter config -asyncTrigger1FrameSizeFrom 48
+ filter config -asyncTrigger1FrameSizeTo 48
+ filter config -asyncTrigger2FrameSizeFrom 48
+ filter config -asyncTrigger2FrameSizeTo 48
+ filter config -userDefinedStat1Enable true
+ filter config -userDefinedStat2Enable true
+ filter config -asyncTrigger1Enable true
+ filter config -asyncTrigger2Enable true
+ if {[filter set $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling filter set $chasNum $cardNum $portNum"
+ }
+
+ filterPallette setDefault
+ filterPallette config -pattern1 00
+ filterPallette config -patternMask1 00
+ filterPallette config -patternOffset1 20
+ filterPallette config -patternOffset2 20
+ if {[filterPallette set $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling filterPallette set $chasNum $cardNum $portNum"
+ }
+
+ capture setDefault
+ capture config -sliceSize 65536
+ if {[capture set $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling capture set $chasNum $cardNum $portNum"
+ }
+
+ if {[interfaceTable select $chasNum $cardNum $portNum]} {
+ errorMsg "Error calling interfaceTable select $chasNum $cardNum $portNum"
+ }
+
+ interfaceTable setDefault
+ if {[interfaceTable set]} {
+ errorMsg "Error calling interfaceTable set"
+ }
+
+ interfaceTable clearAllInterfaces
+ if {[interfaceTable write]} {
+ errorMsg "Error calling interfaceTable write"
+ }
+
+ ixEnablePortIntrinsicLatencyAdjustment $chasNum $cardNum $portNum true
+}
+
+ixWritePortsToHardware portList
+
+if {[ixCheckLinkState $portList] != 0} {
+ errorMsg "One or more port links are down"
+}
+
+proc sendTraffic { flowSpec trafficSpec } {
+ # Send traffic from IXIA.
+ #
+ # Transmits traffic from Rx port (port1), and captures traffic at
+ # Tx port (port2).
+ #
+ # Parameters:
+ # flowSpec - a dict detailing how the packet should be sent. Should be
+ # of format:
+ # {type, numpkts, duration, framerate}
+ # trafficSpec - a dict describing the packet to be sent. Should be
+ # of format:
+ # { l2, vlan, l3}
+ # where each item is in turn a dict detailing the configuration of each
+ # layer of the packet
+ # Returns:
+ # Output from Rx end of Ixia if duration != 0, else 0
+
+ ##################################################
+ ################# Initialisation #################
+ ##################################################
+
+ # Configure global variables. See documentation on 'global' for more
+ # information on why this is necessary
+ # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
+ global portList
+
+ # Extract the provided dictionaries to local variables to simplify the
+ # rest of the script
+
+ # flow spec
+
+ set streamType [dict get $flowSpec type]
+ set numPkts [dict get $flowSpec numpkts]
+ set duration [expr {[dict get $flowSpec duration] * 1000}]
+ set frameRate [dict get $flowSpec framerate]
+
+ # traffic spec
+
+ # extract nested dictionaries
+ set trafficSpec_l2 [dict get $trafficSpec l2]
+ set trafficSpec_l3 [dict get $trafficSpec l3]
+ set trafficSpec_l4 [dict get $trafficSpec l4]
+ set trafficSpec_vlan [dict get $trafficSpec vlan]
+
+ set frameSize [dict get $trafficSpec_l2 framesize]
+ set srcMac [dict get $trafficSpec_l2 srcmac]
+ set dstMac [dict get $trafficSpec_l2 dstmac]
+ set srcPort [dict get $trafficSpec_l4 srcport]
+ set dstPort [dict get $trafficSpec_l4 dstport]
+
+ set proto [dict get $trafficSpec_l3 proto]
+ set srcIp [dict get $trafficSpec_l3 srcip]
+ set dstIp [dict get $trafficSpec_l3 dstip]
+
+ if {[dict exists $trafficSpec_l3 protocolpadbytes]} {
+ set protocolPad [dict get $trafficSpec_l4 protocolpad]
+ set protocolPadBytes [dict get $trafficSpec_l4 protocolpadbytes]
+ }
+
+ set vlanEnabled [dict get $trafficSpec_vlan enabled]
+ if {$vlanEnabled == 1 } {
+ # these keys won't exist if vlan wasn't enabled
+ set vlanId [dict get $trafficSpec_vlan id]
+ set vlanUserPrio [dict get $trafficSpec_vlan priority]
+ set vlanCfi [dict get $trafficSpec_vlan cfi]
+ }
+
+ ##################################################
+ ##################### Streams ####################
+ ##################################################
+
+ streamRegion get $::chassis $::card $::port1
+ if {[streamRegion enableGenerateWarningList $::chassis $::card $::port1 false]} {
+ errorMsg "Error calling streamRegion enableGenerateWarningList $::chassis $::card $::port1 false"
+ }
+
+ set streamId 1
+
+ stream setDefault
+ stream config -ifg 9.6
+ stream config -ifgMIN 19.2
+ stream config -ifgMAX 25.6
+ stream config -ibg 9.6
+ stream config -isg 9.6
+ stream config -rateMode streamRateModePercentRate
+ stream config -percentPacketRate $frameRate
+ stream config -framesize $frameSize
+ stream config -frameType "08 00"
+ stream config -sa $srcMac
+ stream config -da $dstMac
+ stream config -numSA 16
+ stream config -numDA 16
+ stream config -asyncIntEnable true
+ stream config -dma $streamType
+ stream config -numBursts 1
+ stream config -numFrames $numPkts
+ stream config -patternType incrByte
+ stream config -dataPattern x00010203
+ stream config -pattern "00 01 02 03"
+
+ protocol setDefault
+ protocol config -name ipV4
+ protocol config -ethernetType ethernetII
+ if {$vlanEnabled == 1} {
+ protocol config -enable802dot1qTag vlanSingle
+ }
+
+ if {[info exists protocolPad]} {
+ protocol config -enableProtocolPad $protocolPad
+ }
+
+ ip setDefault
+ ip config -ipProtocol ipV4Protocol[string totitle $proto]
+ ip config -checksum "f6 75"
+ ip config -sourceIpAddr $srcIp
+ ip config -sourceIpAddrRepeatCount 10
+ ip config -sourceClass classA
+ ip config -destIpAddr $dstIp
+ ip config -destIpAddrRepeatCount 10
+ ip config -destClass classA
+ ip config -destMacAddr $dstMac
+ ip config -destDutIpAddr 0.0.0.0
+ ip config -ttl 64
+ if {[ip set $::chassis $::card $::port1]} {
+ errorMsg "Error calling ip set $::chassis $::card $::port1"
+ }
+
+ "$proto" setDefault
+ "$proto" config -checksum "25 81"
+ if {["$proto" set $::chassis $::card $::port1]} {
+ errorMsg "Error calling $proto set $::chassis $::card $::port"
+ }
+
+ if {[info exists protocolPad]} {
+ protocolPad setDefault
+ # VxLAN header with VNI 99 (0x63)
+ # Inner SRC 01:02:03:04:05:06
+ # Inner DST 06:05:04:03:02:01
+ # IP SRC 192.168.0.2
+ # IP DST 192.168.240.9
+ # SRC port 3000 (0x0BB8)
+ # DST port 3001 (0x0BB9)
+ # length 26
+ # UDP Checksum 0x2E93
+
+ # From encap case capture
+ protocolPad config -dataBytes "$protocolPadBytes"
+ if {[protocolPad set $::chassis $::card $::port1]} {
+ errorMsg "Error calling protocolPad set $::chassis $::card $::port"
+ set retCode $::TCL_ERROR
+ }
+ }
+
+ if {$vlanEnabled == 1 } {
+ vlan setDefault
+ vlan config -vlanID $vlanId
+ vlan config -userPriority $vlanUserPrio
+ vlan config -cfi $vlanCfi
+ vlan config -mode vIdle
+ vlan config -repeat 10
+ vlan config -step 1
+ vlan config -maskval "0000XXXXXXXXXXXX"
+ vlan config -protocolTagId vlanProtocolTag8100
+ }
+
+ if {[vlan set $::chassis $::card $::port1]} {
+ errorMsg "Error calling vlan set $::chassis $::card $::port1"
+ }
+
+ if {[port isValidFeature $::chassis $::card $::port1 $::portFeatureTableUdf]} {
+ tableUdf setDefault
+ tableUdf clearColumns
+ if {[tableUdf set $::chassis $::card $::port1]} {
+ errorMsg "Error calling tableUdf set $::chassis $::card $::port1"
+ }
+ }
+
+ if {[port isValidFeature $::chassis $::card $::port1 $::portFeatureRandomFrameSizeWeightedPair]} {
+ weightedRandomFramesize setDefault
+ if {[weightedRandomFramesize set $::chassis $::card $::port1]} {
+ errorMsg "Error calling weightedRandomFramesize set $::chassis $::card $::port1"
+ }
+ }
+
+ if {$proto == "tcp"} {
+ tcp setDefault
+ tcp config -sourcePort $srcPort
+ tcp config -destPort $dstPort
+ if {[tcp set $::chassis $::card $::port1 ]} {
+ errorMsg "Error setting tcp on port $::chassis.$::card.$::port1"
+ }
+
+ if {$vlanEnabled != 1} {
+ udf setDefault
+ udf config -repeat 1
+ udf config -continuousCount true
+ udf config -initval {00 00 00 01}
+ udf config -updown uuuu
+ udf config -cascadeType udfCascadeNone
+ udf config -step 1
+
+ packetGroup setDefault
+ packetGroup config -insertSequenceSignature true
+ packetGroup config -sequenceNumberOffset 38
+ packetGroup config -signatureOffset 42
+ packetGroup config -signature "08 71 18 05"
+ packetGroup config -groupIdOffset 52
+ packetGroup config -groupId $streamId
+ packetGroup config -allocateUdf true
+ if {[packetGroup setTx $::chassis $::card $::port1 $streamId]} {
+ errorMsg "Error calling packetGroup setTx $::chassis $::card $::port1 $streamId"
+ }
+ }
+ } elseif {$proto == "udp"} {
+ udp setDefault
+ udp config -sourcePort $srcPort
+ udp config -destPort $dstPort
+ set packetSize [dict get $trafficSpec_l3 packetsize]
+ stream config -framesize $packetSize
+ if {[udp set $::chassis $::card $::port1]} {
+ errorMsg "Error setting udp on port $::chassis.$::card.$::port1"
+ }
+ errorMsg "frameSize: $frameSize, packetSize: $packetSize, srcMac: $srcMac, dstMac: $dstMac, srcPort: $srcPort, dstPort: $dstPort"
+ if {[info exists protocolPad]} {
+ errorMsg "protocolPad: $protocolPad, protocolPadBytes: $protocolPadBytes"
+ }
+ }
+
+ if {[stream set $::chassis $::card $::port1 $streamId]} {
+ errorMsg "Error calling stream set $::chassis $::card $::port1 $streamId"
+ }
+
+ incr streamId
+ streamRegion generateWarningList $::chassis $::card $::port1
+ ixWriteConfigToHardware portList -noProtocolServer
+
+ if {[packetGroup getRx $::chassis $::card $::port2]} {
+ errorMsg "Error calling packetGroup getRx $::chassis $::card $::port2"
+ }
+
+ ##################################################
+ ######### Traffic Transmit and Results ###########
+ ##################################################
+
+ # Transmit traffic
+
+ logMsg "Clearing stats for all ports"
+ ixClearStats portList
+
+ logMsg "Starting packet groups on port $::port2"
+ ixStartPortPacketGroups $::chassis $::card $::port2
+
+ logMsg "Starting Capture on port $::port2"
+ ixStartPortCapture $::chassis $::card $::port2
+
+ logMsg "Starting transmit on port $::port1"
+ ixStartPortTransmit $::chassis $::card $::port1
+
+ # If duration=0 is passed, exit after starting transmit
+
+ if {$duration == 0} {
+ logMsg "Sending traffic until interrupted"
+ return
+ }
+
+ logMsg "Waiting for $duration ms"
+
+ # Wait for duration - 1 second to get traffic rate
+
+ after [expr "$duration - 1"]
+
+ # Get result
+
+ set result [stopTraffic]
+
+ if {$streamType == "contPacket"} {
+ return $result
+ } elseif {$streamType == "stopStream"} {
+ set payError 0
+ set seqError 0
+ set captureLimit 3000
+
+ # explode results from 'stopTraffic' for ease of use later
+ set framesSent [lindex $result 0]
+ set framesRecv [lindex $result 1]
+ set bytesSent [lindex $result 2]
+ set bytesRecv [lindex $result 3]
+
+ if {$framesSent <= $captureLimit} {
+ captureBuffer get $::chassis $::card $::port2 1 $framesSent
+ set capturedFrames [captureBuffer cget -numFrames]
+
+ set notCaptured [expr "$framesRecv - $capturedFrames"]
+ if {$notCaptured != 0} {
+ errorMsg "'$notCaptured' frames were not captured"
+ }
+
+ if {$proto == "tcp"} {
+ for {set z 1} {$z <= $capturedFrames} {incr z} {
+ captureBuffer getframe $z
+ set capFrame [captureBuffer cget -frame]
+ regsub -all " " $capFrame "" frameNoSpaces
+ set frameNoSpaces
+
+ set startPayload 108
+ set endPayload [expr "[expr "$frameSize * 2"] - 9"]
+ set payload [string range $frameNoSpaces $startPayload $endPayload]
+
+ if {$vlanEnabled != 1} {
+ set startSequence 76
+ set endSequence 83
+ set sequence [string range $frameNoSpaces $startSequence $endSequence]
+ scan $sequence %x seqDecimal
+ set seqDecimal
+ if {"$payload" != $::payloadLookup($frameSize)} {
+ errorMsg "frame '$z' payload: invalid payload"
+ incr payError
+ }
+ # variable z increments from 1 to total number of packets
+ # captured TCP sequence numbers start at 0, not 1. When
+ # comparing sequence numbers for captured frames, reduce
+ # variable z by 1 i.e. frame 1 with sequence 0 is compared
+ # to expected sequence 0.
+ if {$seqDecimal != $z-1} {
+ errorMsg "frame '$z' sequence number: Found '$seqDecimal'. Expected '$z'"
+ incr seqError
+ }
+ }
+ }
+ }
+ logMsg "Sequence Errors: $seqError"
+ logMsg "Payload Errors: $payError\n"
+ } else {
+ errorMsg "Too many packets for capture."
+ }
+
+ set result [list $framesSent $framesRecv $bytesSent $bytesRecv $payError $seqError]
+ return $result
+ } else {
+ errorMsg "streamtype is not supported: '$streamType'"
+ }
+}
+
+proc stopTraffic {} {
+ # Stop sending traffic from IXIA.
+ #
+ # Stops Transmit of traffic from Rx port.
+ #
+ # Returns:
+ # Output from Rx end of Ixia.
+
+ ##################################################
+ ################# Initialisation #################
+ ##################################################
+
+ # Configure global variables. See documentation on 'global' for more
+ # information on why this is necessary
+ # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
+ global portList
+
+ ##################################################
+ ####### Stop Traffic Transmit and Results ########
+ ##################################################
+
+ # Read frame rate of transmission
+
+ if {[stat getRate statAllStats $::chassis $::card $::port1]} {
+ errorMsg "Error reading stat rate on port $::chassis $::card $::port1"
+ return $::TCL_ERROR
+ }
+
+ set sendRate [stat cget -framesSent]
+ set sendRateBytes [stat cget -bytesSent]
+
+ if {[stat getRate statAllStats $::chassis $::card $::port2]} {
+ errorMsg "Error reading stat rate on port $::chassis $::card $::port2"
+ return $::TCL_ERROR
+ }
+
+ set recvRate [stat cget -framesReceived]
+ set recvRateBytes [stat cget -bytesReceived]
+
+ # Wait for a second, else we get funny framerate statistics
+ after 1
+
+ # Stop transmission of traffic
+ ixStopTransmit portList
+
+ if {[ixCheckTransmitDone portList] == $::TCL_ERROR} {
+ return -code error
+ } else {
+ logMsg "Transmission is complete.\n"
+ }
+
+ ixStopPacketGroups portList
+ ixStopCapture portList
+
+ # Get statistics
+
+ if {[stat get statAllStats $::chassis $::card $::port1]} {
+ errorMsg "Error reading stat on port $::chassis $::card $::port1"
+ return $::TCL_ERROR
+ }
+
+ set bytesSent [stat cget -bytesSent]
+ set framesSent [stat cget -framesSent]
+
+ if {[stat get statAllStats $::chassis $::card $::port2]} {
+ errorMsg "Error reading stat on port $::chassis $::card $::port2"
+ return $::TCL_ERROR
+ }
+
+ set bytesRecv [stat cget -bytesReceived]
+ set framesRecv [stat cget -framesReceived]
+
+ set bytesDropped [expr "$bytesSent - $bytesRecv"]
+ set framesDropped [expr "$framesSent - $framesRecv"]
+
+ logMsg "Frames Sent: $framesSent"
+ logMsg "Frames Recv: $framesRecv"
+ logMsg "Frames Dropped: $framesDropped\n"
+
+ logMsg "Bytes Sent: $bytesSent"
+ logMsg "Bytes Recv: $bytesRecv"
+ logMsg "Bytes Dropped: $bytesDropped\n"
+
+ logMsg "Frame Rate Sent: $sendRate"
+ logMsg "Frame Rate Recv: $recvRate\n"
+
+ set result [list $framesSent $framesRecv $bytesSent $bytesRecv $sendRate $recvRate $sendRateBytes $recvRateBytes]
+
+ return $result
+}
+
+proc rfcThroughputTest { testSpec trafficSpec } {
+ # Execute RFC tests from IXIA.
+ #
+ # Wraps the sendTraffic proc, repeatedly calling it, storing the result and
+ # performing an iterative binary search to find the highest possible RFC
+ # transmission rate. Abides by the specification of RFC2544 as given by the
+ # IETF:
+ #
+ # https://www.ietf.org/rfc/rfc2544.txt
+ #
+ # Parameters:
+ # testSpec - a dict detailing how the test should be run. Should be
+ # of format:
+ # {numtrials, duration, lossrate}
+ # trafficSpec - a dict describing the packet to be sent. Should be
+ # of format:
+ # { l2, l3}
+ # where each item is in turn a dict detailing the configuration of each
+ # layer of the packet
+ # Returns:
+ # Highest rate with acceptable packet loss.
+
+ ##################################################
+ ################# Initialisation #################
+ ##################################################
+
+ # Configure global variables. See documentation on 'global' for more
+ # information on why this is necessary
+ # https://www.tcl.tk/man/tcl8.5/tutorial/Tcl13.html
+ global portList
+
+ # Extract the provided dictionaries to local variables to simplify the
+ # rest of the script
+
+ # testSpec
+
+ # RFC2544 to IXIA terminology mapping (it affects Ixia configuration below):
+ # Test => Trial
+ # Trial => Iteration
+ set numTrials [dict get $testSpec tests] ;# we don't use this yet
+ set duration [dict get $testSpec duration]
+ set lossRate [dict get $testSpec lossrate]
+ set multipleStream [dict get $testSpec multipleStreams] ;# we don't use this yet
+
+ # variables used for binary search of results
+ set min 1
+ set max 100
+ set diff [expr "$max - $min"]
+
+ set result [list 0 0 0 0 0 0 0 0] ;# best result found so far
+ set percentRate 100 ;# starting throughput percentage rate
+
+ ##################################################
+ ######### Traffic Transmit and Results ###########
+ ##################################################
+
+ # iterate a maximum of 20 times, sending packets at a set rate to
+ # find fastest possible rate with acceptable packetloss
+ #
+ # As a reminder, the binary search works something like this:
+ #
+ # percentRate < idealValue --> min = percentRate
+ # percentRate > idealValue --> max = percentRate
+ # percentRate = idealValue --> max = min = percentRate
+ #
+ for {set i 0} {$i < 20} {incr i} {
+ dict set flowSpec type "contPacket"
+ dict set flowSpec numpkts 100 ;# this can be bypassed
+ dict set flowSpec duration $duration
+ dict set flowSpec framerate $percentRate
+
+ set flowStats [sendTraffic $flowSpec $trafficSpec]
+
+ # explode results from 'sendTraffic' for ease of use later
+ set framesSent [lindex $flowStats 0]
+ set framesRecv [lindex $flowStats 1]
+ set sendRate [lindex $flowStats 4]
+
+ set framesDropped [expr "$framesSent - $framesRecv"]
+ if {$framesSent > 0} {
+ set framesDroppedRate [expr "double($framesDropped) / $framesSent"]
+ } else {
+ set framesDroppedRate 100
+ }
+
+ # check if we've already found the rate before 10 iterations, i.e.
+ # 'percentRate = idealValue'. This is as accurate as we can get with
+ # integer values.
+ if {[expr "$max - $min"] <= 0.5 } {
+ break
+ }
+
+ # handle 'percentRate <= idealValue' case
+ if {$framesDroppedRate <= $lossRate} {
+ logMsg "Frame sendRate of '$sendRate' pps succeeded ('$framesDropped' frames dropped)"
+
+ set result $flowStats
+ set min $percentRate
+
+ set percentRate [expr "$percentRate + ([expr "$max - $min"] * 0.5)"]
+ # handle the 'percentRate > idealValue' case
+ } else {
+ if {$framesDropped == $framesSent} {
+ errorMsg "Dropped all frames!"
+ }
+
+ errorMsg "Frame sendRate of '$sendRate' pps failed ('$framesDropped' frames dropped)"
+
+ set max $percentRate
+ set percentRate [expr "$percentRate - ([expr "$max - $min"] * 0.5)"]
+ }
+ }
+
+ set bestRate [lindex $result 4]
+
+ logMsg "$lossRate% packet loss rate: $bestRate"
+
+ return $result
+}