summaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorChristian Trautman <ctrautma@redhat.com>2017-04-27 16:08:49 -0400
committerChristian Trautman <ctrautma@redhat.com>2017-05-15 10:23:32 -0400
commit7eaeffff1c2976e1022f7716c7eb0c746482824e (patch)
treed5e1dea51a1f2c859241803aea1d017625d0b291 /tools
parent59aae8c0539ca9632d9ffdcb2788ab715fbff9ec (diff)
xena_pairs: Add pairs topology for 2544 testing
Add xena pairs topology and port removal options for JSON files with RFC2544 testing. Refactored JSON code for better expansion later. Resolved pathing issues related to previous patch allowing for execution of VSPerf from any directory. JIRA: VSPERF-502 Change-Id: Ida60c1223ae0f45f8879351770ab7fdce859b59b Signed-off-by: Christian Trautman <ctrautma@redhat.com>
Diffstat (limited to 'tools')
-rw-r--r--tools/pkt_gen/xena/json/__init__.py13
-rw-r--r--tools/pkt_gen/xena/json/json_utilities.py105
-rw-r--r--tools/pkt_gen/xena/json/xena_json.py (renamed from tools/pkt_gen/xena/xena_json.py)258
-rw-r--r--tools/pkt_gen/xena/json/xena_json_blocks.py50
-rw-r--r--tools/pkt_gen/xena/json/xena_json_mesh.py46
-rw-r--r--tools/pkt_gen/xena/json/xena_json_pairs.py60
-rwxr-xr-xtools/pkt_gen/xena/xena.py56
7 files changed, 335 insertions, 253 deletions
diff --git a/tools/pkt_gen/xena/json/__init__.py b/tools/pkt_gen/xena/json/__init__.py
new file mode 100644
index 00000000..54e0301a
--- /dev/null
+++ b/tools/pkt_gen/xena/json/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2015-2017 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/tools/pkt_gen/xena/json/json_utilities.py b/tools/pkt_gen/xena/json/json_utilities.py
new file mode 100644
index 00000000..857aa102
--- /dev/null
+++ b/tools/pkt_gen/xena/json/json_utilities.py
@@ -0,0 +1,105 @@
+# Copyright 2017 Red Hat Inc & Xena Networks.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Contributors:
+# Dan Amzulescu, Xena Networks
+# Christian Trautman, Red Hat Inc.
+
+"""JSON utility module"""
+
+import base64
+import json
+import locale
+import logging
+import uuid
+
+_LOGGER = logging.getLogger(__name__)
+_LOCALE = locale.getlocale()[1]
+
+def create_segment(header_type, encode_64_string):
+ """
+ Create segment for JSON file
+ :param header_type: Type of header as string
+ :param encode_64_string: 64 byte encoded string value of the hex bytes
+ :return: segment as dictionary
+ """
+ return {
+ "SegmentType": header_type.upper(),
+ "SegmentValue": encode_64_string,
+ "ItemID": str(uuid.uuid4()),
+ "ParentID": "",
+ "Label": ""}
+
+
+def decode_byte_array(enc_str):
+ """ Decodes the base64-encoded string to a byte array
+ :param enc_str: The base64-encoded string representing a byte array
+ :return: The decoded byte array
+ """
+ dec_string = base64.b64decode(enc_str)
+ barray = bytearray()
+ barray.extend(dec_string)
+ return barray
+
+
+def encode_byte_array(byte_arr):
+ """ Encodes the byte array as a base64-encoded string
+ :param byte_arr: A bytearray containing the bytes to convert
+ :return: A base64 encoded string
+ """
+ enc_string = base64.b64encode(bytes(byte_arr))
+ return enc_string
+
+
+def read_json_file(json_file):
+ """
+ Read the json file path and return a dictionary of the data
+ :param json_file: path to json file
+ :return: dictionary of json data
+ """
+ try:
+ with open(json_file, 'r', encoding=_LOCALE) as data_file:
+ file_data = json.loads(data_file.read())
+ except ValueError as exc:
+ # general json exception, Python 3.5 adds new exception type
+ _LOGGER.exception("Exception with json read: %s", exc)
+ raise
+ except IOError as exc:
+ _LOGGER.exception(
+ 'Exception during file open: %s file=%s', exc, json_file)
+ raise
+ return file_data
+
+
+def write_json_file(json_data, output_path):
+ """
+ Write out the dictionary of data to a json file
+ :param json_data: dictionary of json data
+ :param output_path: file path to write output
+ :return: Boolean if success
+ """
+ try:
+ with open(output_path, 'w', encoding=_LOCALE) as fileh:
+ json.dump(json_data, fileh, indent=2, sort_keys=True,
+ ensure_ascii=True)
+ return True
+ except ValueError as exc:
+ # general json exception, Python 3.5 adds new exception type
+ _LOGGER.exception(
+ "Exception with json write: %s", exc)
+ return False
+ except IOError as exc:
+ _LOGGER.exception(
+ 'Exception during file write: %s file=%s', exc, output_path)
+ return False
diff --git a/tools/pkt_gen/xena/xena_json.py b/tools/pkt_gen/xena/json/xena_json.py
index 50d0e2fe..b1eed720 100644
--- a/tools/pkt_gen/xena/xena_json.py
+++ b/tools/pkt_gen/xena/json/xena_json.py
@@ -23,31 +23,35 @@
Xena JSON module
"""
-import base64
from collections import OrderedDict
-import json
import locale
import logging
-import uuid
+import os
import scapy.layers.inet as inet
+from tools.pkt_gen.xena.json import json_utilities
+
_LOGGER = logging.getLogger(__name__)
_LOCALE = locale.getlocale()[1]
+_CURR_DIR = os.path.dirname(os.path.realpath(__file__))
+
class XenaJSON(object):
"""
- Class to modify and read Xena JSON configuration files.
+ Parent Class to modify and read Xena JSON configuration files.
"""
- def __init__(self, json_path='./profiles/baseconfig.x2544'):
+ def __init__(self,
+ json_path=os.path.join(
+ _CURR_DIR, '../profiles/baseconfig.x2544')):
"""
Constructor
:param json_path: path to JSON file to read. Expected files must have
two module ports with each port having its own stream config profile.
:return: XenaJSON object
"""
- self.json_data = read_json_file(json_path)
+ self.json_data = json_utilities.read_json_file(json_path)
self.packet_data = OrderedDict()
self.packet_data['layer2'] = None
@@ -131,16 +135,18 @@ class XenaJSON(object):
if self.packet_data['layer2']:
# slice out the layer 2 bytes from the packet header byte array
layer2 = packet[0][header_pos: len(self.packet_data['layer2'][0])]
- seg = create_segment(
- "ETHERNET", encode_byte_array(layer2).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "ETHERNET", json_utilities.encode_byte_array(layer2).decode(
+ _LOCALE))
if multistream_layer == 'L2' and flows > 0:
self._add_multistream_layer(entity=0, seg_uuid=seg['ItemID'],
stop_value=flows, layer=2)
segment1.append(seg)
# now do the other port data with reversed src, dst info
layer2 = packet[1][header_pos: len(self.packet_data['layer2'][1])]
- seg = create_segment(
- "ETHERNET", encode_byte_array(layer2).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "ETHERNET", json_utilities.encode_byte_array(layer2).decode(
+ _LOCALE))
segment2.append(seg)
if multistream_layer == 'L2' and flows > 0:
self._add_multistream_layer(entity=1, seg_uuid=seg['ItemID'],
@@ -150,17 +156,17 @@ class XenaJSON(object):
# slice out the vlan bytes from the packet header byte array
vlan = packet[0][header_pos: len(
self.packet_data['vlan'][0]) + header_pos]
- segment1.append(create_segment(
- "VLAN", encode_byte_array(vlan).decode(_LOCALE)))
- segment2.append(create_segment(
- "VLAN", encode_byte_array(vlan).decode(_LOCALE)))
+ segment1.append(json_utilities.create_segment(
+ "VLAN", json_utilities.encode_byte_array(vlan).decode(_LOCALE)))
+ segment2.append(json_utilities.create_segment(
+ "VLAN", json_utilities.encode_byte_array(vlan).decode(_LOCALE)))
header_pos += len(vlan)
if self.packet_data['layer3']:
# slice out the layer 3 bytes from the packet header byte array
layer3 = packet[0][header_pos: len(
self.packet_data['layer3'][0]) + header_pos]
- seg = create_segment(
- "IP", encode_byte_array(layer3).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "IP", json_utilities.encode_byte_array(layer3).decode(_LOCALE))
segment1.append(seg)
if multistream_layer == 'L3' and flows > 0:
self._add_multistream_layer(entity=0, seg_uuid=seg['ItemID'],
@@ -168,8 +174,8 @@ class XenaJSON(object):
# now do the other port data with reversed src, dst info
layer3 = packet[1][header_pos: len(
self.packet_data['layer3'][1]) + header_pos]
- seg = create_segment(
- "IP", encode_byte_array(layer3).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "IP", json_utilities.encode_byte_array(layer3).decode(_LOCALE))
segment2.append(seg)
if multistream_layer == 'L3' and flows > 0:
self._add_multistream_layer(entity=1, seg_uuid=seg['ItemID'],
@@ -179,8 +185,8 @@ class XenaJSON(object):
# slice out the layer 4 bytes from the packet header byte array
layer4 = packet[0][header_pos: len(
self.packet_data['layer4'][0]) + header_pos]
- seg = create_segment(
- "UDP", encode_byte_array(layer4).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "UDP", json_utilities.encode_byte_array(layer4).decode(_LOCALE))
segment1.append(seg)
if multistream_layer == 'L4' and flows > 0:
self._add_multistream_layer(entity=0, seg_uuid=seg['ItemID'],
@@ -188,8 +194,8 @@ class XenaJSON(object):
# now do the other port data with reversed src, dst info
layer4 = packet[1][header_pos: len(
self.packet_data['layer4'][1]) + header_pos]
- seg = create_segment(
- "UDP", encode_byte_array(layer4).decode(_LOCALE))
+ seg = json_utilities.create_segment(
+ "UDP", json_utilities.encode_byte_array(layer4).decode(_LOCALE))
segment2.append(seg)
if multistream_layer == 'L4' and flows > 0:
self._add_multistream_layer(entity=1, seg_uuid=seg['ItemID'],
@@ -427,217 +433,11 @@ class XenaJSON(object):
self.json_data['TestOptions']['TestTypeOptionMap']['Back2Back'][
'RateSweepOptions']['EndValue'] = endvalue
- def set_topology_blocks(self):
- """
- Set the test topology to a West to East config for half duplex flow with
- port 0 as the sender and port 1 as the receiver.
- :return: None
- """
- self.json_data['TestOptions']['TopologyConfig']['Topology'] = 'BLOCKS'
- self.json_data['TestOptions']['TopologyConfig'][
- 'Direction'] = 'WEST_EAST'
- self.json_data['PortHandler']['EntityList'][0][
- 'PortGroup'] = "WEST"
- self.json_data['PortHandler']['EntityList'][1][
- 'PortGroup'] = "EAST"
-
- def set_topology_mesh(self):
- """
- Set the test topology to Mesh for bi directional full duplex flow
- :return: None
- """
- self.json_data['TestOptions']['TopologyConfig']['Topology'] = 'MESH'
- self.json_data['TestOptions']['TopologyConfig']['Direction'] = 'BIDIR'
- self.json_data['PortHandler']['EntityList'][0][
- 'PortGroup'] = "UNDEFINED"
- self.json_data['PortHandler']['EntityList'][1][
- 'PortGroup'] = "UNDEFINED"
-
def write_config(self, path='./2bUsed.x2544'):
"""
Write the config to out as file
:param path: Output file to export the json data to
:return: None
"""
- if not write_json_file(self.json_data, path):
+ if not json_utilities.write_json_file(self.json_data, path):
raise RuntimeError("Could not write out file, please check config")
-
-
-def create_segment(header_type, encode_64_string):
- """
- Create segment for JSON file
- :param header_type: Type of header as string
- :param encode_64_string: 64 byte encoded string value of the hex bytes
- :return: segment as dictionary
- """
- return {
- "SegmentType": header_type.upper(),
- "SegmentValue": encode_64_string,
- "ItemID": str(uuid.uuid4()),
- "ParentID": "",
- "Label": ""}
-
-
-def decode_byte_array(enc_str):
- """ Decodes the base64-encoded string to a byte array
- :param enc_str: The base64-encoded string representing a byte array
- :return: The decoded byte array
- """
- dec_string = base64.b64decode(enc_str)
- barray = bytearray()
- barray.extend(dec_string)
- return barray
-
-
-def encode_byte_array(byte_arr):
- """ Encodes the byte array as a base64-encoded string
- :param byte_arr: A bytearray containing the bytes to convert
- :return: A base64 encoded string
- """
- enc_string = base64.b64encode(bytes(byte_arr))
- return enc_string
-
-
-def print_json_report(json_data):
- """
- Print out info from the json data for testing purposes only.
- :param json_data: json loaded data from json.loads
- :return: None
- """
- print("<<Xena JSON Config Report>>\n")
- try:
- print("### Chassis Info ###")
- print("Chassis IP: {}".format(json_data['ChassisManager'][
- 'ChassisList'][0]['HostName']))
- print("Chassis Password: {}".format(json_data['ChassisManager'][
- 'ChassisList'][0]['Password']))
- print("### Port Configuration ###")
- print("Port 1 IPv4:{}/{} gateway:{}".format(
- json_data['PortHandler']['EntityList'][0]["IpV4Address"],
- json_data['PortHandler']['EntityList'][0]["IpV4RoutingPrefix"],
- json_data['PortHandler']['EntityList'][0]["IpV4Gateway"]))
- print("Port 1 IPv6:{}/{} gateway:{}".format(
- json_data['PortHandler']['EntityList'][0]["IpV6Address"],
- json_data['PortHandler']['EntityList'][0]["IpV6RoutingPrefix"],
- json_data['PortHandler']['EntityList'][0]["IpV6Gateway"]))
- print("Port 2 IPv4:{}/{} gateway:{}".format(
- json_data['PortHandler']['EntityList'][1]["IpV4Address"],
- json_data['PortHandler']['EntityList'][1]["IpV4RoutingPrefix"],
- json_data['PortHandler']['EntityList'][1]["IpV4Gateway"]))
- print("Port 2 IPv6:{}/{} gateway:{}".format(
- json_data['PortHandler']['EntityList'][1]["IpV6Address"],
- json_data['PortHandler']['EntityList'][1]["IpV6RoutingPrefix"],
- json_data['PortHandler']['EntityList'][1]["IpV6Gateway"]))
- print("Port 1: {}/{} group: {}".format(
- json_data['PortHandler']['EntityList'][0]['PortRef']['ModuleIndex'],
- json_data['PortHandler']['EntityList'][0]['PortRef']['PortIndex'],
- json_data['PortHandler']['EntityList'][0]['PortGroup']))
- print("Port 2: {}/{} group: {}".format(
- json_data['PortHandler']['EntityList'][1]['PortRef']['ModuleIndex'],
- json_data['PortHandler']['EntityList'][1]['PortRef']['PortIndex'],
- json_data['PortHandler']['EntityList'][1]['PortGroup']))
- print("### Tests Enabled ###")
- print("Back2Back Enabled: {}".format(json_data['TestOptions'][
- 'TestTypeOptionMap']['Back2Back']['Enabled']))
- print("Throughput Enabled: {}".format(json_data['TestOptions'][
- 'TestTypeOptionMap']['Throughput']['Enabled']))
- print("### Test Options ###")
- print("Test topology: {}/{}".format(
- json_data['TestOptions']['TopologyConfig']['Topology'],
- json_data['TestOptions']['TopologyConfig']['Direction']))
- print("Packet Sizes: {}".format(json_data['TestOptions'][
- 'PacketSizes']['CustomPacketSizes']))
- print("Test duration: {}".format(json_data['TestOptions'][
- 'TestTypeOptionMap']['Throughput']['Duration']))
- print("Acceptable loss rate: {}".format(json_data['TestOptions'][
- 'TestTypeOptionMap']['Throughput']['RateIterationOptions'][
- 'AcceptableLoss']))
- print("Micro TPLD enabled: {}".format(json_data['TestOptions'][
- 'FlowCreationOptions']['UseMicroTpldOnDemand']))
- print("Test iterations: {}".format(json_data['TestOptions'][
- 'TestTypeOptionMap']['Throughput']['Iterations']))
- if 'StreamConfig' in json_data['StreamProfileHandler']['EntityList'][0]:
- print("### Header segments ###")
- for seg in json_data['StreamProfileHandler']['EntityList']:
- for header in seg['StreamConfig']['HeaderSegments']:
- print("Type: {}".format(
- header['SegmentType']))
- print("Value: {}".format(decode_byte_array(
- header['SegmentValue'])))
- print("### Multi Stream config ###")
- for seg in json_data['StreamProfileHandler']['EntityList']:
- for header in seg['StreamConfig']['HwModifiers']:
- print(header)
- except KeyError as exc:
- print("Error setting not found in JSON data: {}".format(exc))
-
-
-def read_json_file(json_file):
- """
- Read the json file path and return a dictionary of the data
- :param json_file: path to json file
- :return: dictionary of json data
- """
- try:
- with open(json_file, 'r', encoding=_LOCALE) as data_file:
- file_data = json.loads(data_file.read())
- except ValueError as exc:
- # general json exception, Python 3.5 adds new exception type
- _LOGGER.exception("Exception with json read: %s", exc)
- raise
- except IOError as exc:
- _LOGGER.exception(
- 'Exception during file open: %s file=%s', exc, json_file)
- raise
- return file_data
-
-
-def write_json_file(json_data, output_path):
- """
- Write out the dictionary of data to a json file
- :param json_data: dictionary of json data
- :param output_path: file path to write output
- :return: Boolean if success
- """
- try:
- with open(output_path, 'w', encoding=_LOCALE) as fileh:
- json.dump(json_data, fileh, indent=2, sort_keys=True,
- ensure_ascii=True)
- return True
- except ValueError as exc:
- # general json exception, Python 3.5 adds new exception type
- _LOGGER.exception(
- "Exception with json write: %s", exc)
- return False
- except IOError as exc:
- _LOGGER.exception(
- 'Exception during file write: %s file=%s', exc, output_path)
- return False
-
-
-if __name__ == "__main__":
- print("Running UnitTest for XenaJSON")
- JSON = XenaJSON()
- print_json_report(JSON.json_data)
- JSON.set_chassis_info('192.168.0.5', 'vsperf')
- JSON.set_port(0, 1, 0)
- JSON.set_port(1, 1, 1)
- JSON.set_port_ip_v4(0, '192.168.240.10', 32, '192.168.240.1')
- JSON.set_port_ip_v4(1, '192.168.240.11', 32, '192.168.240.1')
- JSON.set_port_ip_v6(0, 'a1a1:a2a2:a3a3:a4a4:a5a5:a6a6:a7a7:a8a8', 128,
- 'a1a1:a2a2:a3a3:a4a4:a5a5:a6a6:a7a7:1111')
- JSON.set_port_ip_v6(1, 'b1b1:b2b2:b3b3:b4b4:b5b5:b6b6:b7b7:b8b8', 128,
- 'b1b1:b2b2:b3b3:b4b4:b5b5:b6b6:b7b7:1111')
- JSON.set_header_layer2(dst_mac='dd:dd:dd:dd:dd:dd',
- src_mac='ee:ee:ee:ee:ee:ee')
- JSON.set_header_vlan(vlan_id=5)
- JSON.set_header_layer3(src_ip='192.168.100.2', dst_ip='192.168.100.3',
- protocol='udp')
- JSON.set_header_layer4_udp(source_port=3000, destination_port=3001)
- JSON.set_test_options_tput(packet_sizes=[64], duration=10, iterations=1,
- loss_rate=0.0, micro_tpld=True)
- JSON.add_header_segments(flows=4000, multistream_layer='L4')
- JSON.set_topology_blocks()
- write_json_file(JSON.json_data, './testthis.x2544')
- JSON = XenaJSON('./testthis.x2544')
- print_json_report(JSON.json_data)
diff --git a/tools/pkt_gen/xena/json/xena_json_blocks.py b/tools/pkt_gen/xena/json/xena_json_blocks.py
new file mode 100644
index 00000000..d0a0864c
--- /dev/null
+++ b/tools/pkt_gen/xena/json/xena_json_blocks.py
@@ -0,0 +1,50 @@
+# Copyright 2017 Red Hat Inc & Xena Networks.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Contributors:
+# Dan Amzulescu, Xena Networks
+# Christian Trautman, Red Hat Inc.
+#
+# Usage can be seen below in unit test. This implementation is designed for one
+# module two port Xena chassis runs only.
+
+"""
+Xena JSON module for blocks topology
+"""
+
+from tools.pkt_gen.xena.json.xena_json import XenaJSON
+
+
+class XenaJSONBlocks(XenaJSON):
+ """
+ Class to modify and read Xena JSON configuration files. Topology will be set
+ as Blocks
+ """
+ def __init__(self):
+ super(XenaJSONBlocks, self).__init__()
+ self.set_topology_blocks()
+
+ def set_topology_blocks(self):
+ """
+ Set the test topology to a West to East config for half duplex flow with
+ port 0 as the sender and port 1 as the receiver.
+ :return: None
+ """
+ self.json_data['TestOptions']['TopologyConfig']['Topology'] = 'BLOCKS'
+ self.json_data['TestOptions']['TopologyConfig'][
+ 'Direction'] = 'WEST_EAST'
+ self.json_data['PortHandler']['EntityList'][0][
+ 'PortGroup'] = "WEST"
+ self.json_data['PortHandler']['EntityList'][1][
+ 'PortGroup'] = "EAST"
diff --git a/tools/pkt_gen/xena/json/xena_json_mesh.py b/tools/pkt_gen/xena/json/xena_json_mesh.py
new file mode 100644
index 00000000..5d6a1f13
--- /dev/null
+++ b/tools/pkt_gen/xena/json/xena_json_mesh.py
@@ -0,0 +1,46 @@
+# Copyright 2017 Red Hat Inc & Xena Networks.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Contributors:
+# Dan Amzulescu, Xena Networks
+# Christian Trautman, Red Hat Inc.
+#
+# Usage can be seen below in unit test. This implementation is designed for one
+# module two port Xena chassis runs only.
+
+"""
+Xena JSON module for mesh topology.
+"""
+
+from tools.pkt_gen.xena.json.xena_json import XenaJSON
+
+
+class XenaJSONMesh(XenaJSON):
+ """
+ Class to modify and read Xena JSON configuration files. Topology will be set
+ as Mesh.
+ """
+ def __init__(self):
+ super(XenaJSONMesh, self).__init__()
+ self.set_topology_mesh()
+
+ def set_topology_mesh(self):
+ """
+ Set the test topology to Mesh for bi directional full duplex flow
+ :return: None
+ """
+ self.json_data['TestOptions']['TopologyConfig']['Topology'] = 'MESH'
+ self.json_data['TestOptions']['TopologyConfig']['Direction'] = 'BIDIR'
+ self.json_data['PortHandler']['EntityList'][0]['PortGroup'] = "UNDEFINED"
+ self.json_data['PortHandler']['EntityList'][1]['PortGroup'] = "UNDEFINED"
diff --git a/tools/pkt_gen/xena/json/xena_json_pairs.py b/tools/pkt_gen/xena/json/xena_json_pairs.py
new file mode 100644
index 00000000..4f97f0ba
--- /dev/null
+++ b/tools/pkt_gen/xena/json/xena_json_pairs.py
@@ -0,0 +1,60 @@
+# Copyright 2017 Red Hat Inc & Xena Networks.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Contributors:
+# Dan Amzulescu, Xena Networks
+# Christian Trautman, Red Hat Inc.
+#
+# Usage can be seen below in unit test. This implementation is designed for one
+# module two port Xena chassis runs only.
+
+"""
+Xena JSON module for pairs topology
+"""
+
+from tools.pkt_gen.xena.json.xena_json import XenaJSON
+
+
+class XenaJSONPairs(XenaJSON):
+ """
+ Class to modify and read Xena JSON configuration files. Topology will be set
+ as Blocks
+ """
+ def __init__(self):
+ super(XenaJSONPairs, self).__init__()
+ self.set_topology_pairs()
+
+ def set_topology_pairs(self):
+ """
+ Set the test topology to loopback pairs for packets that need to return
+ to the same port they are sent from
+ :return: None
+ """
+ self.json_data['TestOptions']['TopologyConfig']['Topology'] = 'PAIRS'
+ self.json_data['TestOptions']['TopologyConfig'][
+ 'Direction'] = 'WEST_EAST'
+ self.json_data['PortHandler']['EntityList'][0][
+ 'PortGroup'] = "WEST"
+ self.json_data['PortHandler']['EntityList'][1][
+ 'PortGroup'] = "WEST"
+
+ def remove_port(self, port_number):
+ """
+ Remove a port from the config.
+ :param port_number: port to remove from json config as int
+ :return: None
+ """
+ del self.json_data['PortHandler']['EntityList'][port_number]
+ del self.json_data['StreamHandler']['StreamConnectionList'][0][
+ 'Port{}Id'.format(port_number + 1)]
diff --git a/tools/pkt_gen/xena/xena.py b/tools/pkt_gen/xena/xena.py
index 26d26542..31347c5f 100755
--- a/tools/pkt_gen/xena/xena.py
+++ b/tools/pkt_gen/xena/xena.py
@@ -28,27 +28,27 @@ import logging
import os
import subprocess
import sys
-from time import sleep
import xml.etree.ElementTree as ET
from collections import OrderedDict
-# scapy imports
+from time import sleep
+
import scapy.layers.inet as inet
-# VSPerf imports
-from conf import settings
from conf import merge_spec
+from conf import settings
from core.results.results_constants import ResultsConstants
from tools.pkt_gen.trafficgen.trafficgen import ITrafficGenerator
-
-# Xena module imports
-from tools.pkt_gen.xena.xena_json import XenaJSON
from tools.pkt_gen.xena.XenaDriver import (
aggregate_stats,
line_percentage,
XenaSocketDriver,
XenaManager,
)
+from tools.pkt_gen.xena.json.xena_json_mesh import XenaJSONMesh
+from tools.pkt_gen.xena.json.xena_json_blocks import XenaJSONBlocks
+from tools.pkt_gen.xena.json.xena_json_pairs import XenaJSONPairs
+_CURR_DIR = os.path.dirname(os.path.realpath(__file__))
class Xena(ITrafficGenerator):
"""
@@ -263,16 +263,28 @@ class Xena(ITrafficGenerator):
return result_dict
- def _setup_json_config(self, tests, loss_rate, testtype=None):
+ def _setup_json_config(self, tests, loss_rate, testtype=None,
+ bonding_test=False):
"""
Create a 2bUsed json file that will be used for xena2544.exe execution.
:param tests: Number of tests
:param loss_rate: The acceptable loss rate as float
:param testtype: Either '2544_b2b' or '2544_throughput' as string
+ :param bonding_test: Specify if the test is a bonding test which will
+ enable the pairs topology
:return: None
"""
try:
- j_file = XenaJSON('./tools/pkt_gen/xena/profiles/baseconfig.x2544')
+ # set duplex mode, this code is valid, pylint complaining with a
+ # warning that many have complained about online.
+ # pylint: disable=redefined-variable-type
+ if self._params['traffic']['bidir'] == "True":
+ j_file = XenaJSONMesh()
+ elif self._params['traffic']['bidir'] == "False":
+ j_file = XenaJSONBlocks()
+ elif bonding_test:
+ j_file = XenaJSONPairs()
+
j_file.set_chassis_info(
settings.getValue('TRAFFICGEN_XENA_IP'),
settings.getValue('TRAFFICGEN_XENA_PASSWORD')
@@ -337,13 +349,9 @@ class Xena(ITrafficGenerator):
j_file.add_header_segments(
flows=self._params['traffic']['multistream'],
multistream_layer=self._params['traffic']['stream_type'])
- # set duplex mode
- if self._params['traffic']['bidir'] == "True":
- j_file.set_topology_mesh()
- else:
- j_file.set_topology_blocks()
- j_file.write_config('./tools/pkt_gen/xena/profiles/2bUsed.x2544')
+ j_file.write_config(os.path.join(
+ _CURR_DIR, 'profiles/2bUsed.x2544'))
except Exception as exc:
self._logger.exception("Error during Xena JSON setup: %s", exc)
raise
@@ -488,9 +496,9 @@ class Xena(ITrafficGenerator):
Start the xena2544 exe.
:return: None
"""
- args = ["mono", "./tools/pkt_gen/xena/Xena2544.exe", "-c",
- "./tools/pkt_gen/xena/profiles/2bUsed.x2544", "-e", "-r",
- "./tools/pkt_gen/xena", "-u",
+ args = ["mono", os.path.join(_CURR_DIR, "Xena2544.exe"), "-c",
+ os.path.join(_CURR_DIR, "profiles/2bUsed.x2544"), "-e", "-r",
+ _CURR_DIR, "-u",
settings.getValue('TRAFFICGEN_XENA_USER')]
# Sometimes Xena2544.exe completes, but mono holds the process without
# releasing it, this can cause a deadlock of the main thread. Use the
@@ -624,7 +632,7 @@ class Xena(ITrafficGenerator):
self._start_xena_2544()
self._wait_xena_2544_complete()
- root = ET.parse(r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ root = ET.parse(os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
if settings.getValue('TRAFFICGEN_XENA_RFC2544_VERIFY'):
# record the previous settings so we can revert to them if needed to
@@ -652,7 +660,7 @@ class Xena(ITrafficGenerator):
'TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION'), lossrate)
self.wait_rfc2544_throughput()
root = ET.parse(
- r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
# If it passed, report the number of lost frames and exit the
# loop
@@ -695,7 +703,7 @@ class Xena(ITrafficGenerator):
traffic, old_tests, self._duration, lossrate)
self.wait_rfc2544_throughput()
root = ET.parse(
- r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
else:
self._logger.error(
'Maximum number of verify attempts reached. Reporting last result')
@@ -723,7 +731,7 @@ class Xena(ITrafficGenerator):
See ITrafficGenerator for description
"""
self._wait_xena_2544_complete()
- root = ET.parse(r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ root = ET.parse(os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
return Xena._create_throughput_result(root)
def send_rfc2544_back2back(self, traffic=None, tests=1, duration=20,
@@ -742,7 +750,7 @@ class Xena(ITrafficGenerator):
self._setup_json_config(tests, lossrate, '2544_b2b')
self._start_xena_2544()
self._wait_xena_2544_complete()
- root = ET.parse(r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ root = ET.parse(os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
return Xena._create_throughput_result(root)
def start_rfc2544_back2back(self, traffic=None, tests=1, duration=20,
@@ -764,7 +772,7 @@ class Xena(ITrafficGenerator):
"""Wait and set results of RFC2544 test.
"""
self._wait_xena_2544_complete()
- root = ET.parse(r'./tools/pkt_gen/xena/xena2544-report.xml').getroot()
+ root = ET.parse(os.path.join(_CURR_DIR, "xena2544-report.xml")).getroot()
return Xena._create_throughput_result(root)